1. Safety Precautions
Products could probably be damaged due to electrostatic discharge (ESD). Please follow these steps below for a successful computer assembly:
- Make sure all parts are firmly connected; otherwise, it might lead to the failure of recognizing components or starting the computer.
- In order to prevent products from being damaged by ESD, please make sure to discharge your body static by touching other metal objects before taking the motherboard out of box.
- Hold the border of motherboard when taking it out. Do not touch the sensitive parts of motherboard.
- Please put the motherboard in an anti-static container or on anti-static pad if not needed.
- Before turning on the computer, make sure all parts inside the case are firmly connected without any loose screws or metal components.
- Do not start the computer before installation finished, otherwise it might result in permanent damage to the computer parts or even injury to the user.
- If you need any assistance in the process of installation, please contact our after-sales customer service or reach us on HUANANZHI official E-mail: business@huananzhi.com for professional technical support.
- Prior to installation or disassembly, please switch off the power and pull the power cable from the socket.
- Keep the motherboard away from moisture.
- Keep the user manual for future reference.
- Before plugging the power supply, please make sure the socket provides the corresponding voltage.
- In any of the following situations, please keep the motherboard and power cable in a safe place. Do not put anything onto the power cable.
- In the event of any of the following conditions, have the board checked by a service technician: Liquid penetrated into the computer, Motherboard is exposed to moisture, Motherboard does not work even if you follow the instructions on user manual, Motherboard fell off to the ground and got damaged, Motherboard has clear signs of damage.
2. Product Overview
2.1 Brief Introduction
The HUANANZHI X99-QD4 Motherboard is designed to support Intel LGA2011-3 platform processors, offering robust performance for enthusiast, gaming, and office scenarios. It features quad-channel DDR4 memory support and multiple expansion options.
Features:
- CPU: Intel® LGA2011-3 Processor (Intel® Xeon™, Intel® LGA2011-3 5/6 Generation Intel® Core™)
- RAM: 4*DIMM slots supporting up to 128GB DDR4 (2400/2133/1866MHz Non-ECC/ECC memory). Quad-Channel Memory Architecture. Actual memory data rate depends on CPU type and DRAM module.
- I/O Effects: 6 x SATA3.0 (maximum transfer speed up to 6GB/s), 4 x USB2.0 interface, 2 x USB3.0 ports, 1 x PS/2 Mouse and Keyboard port, 1 x RJ45 Network card interface.
- Audio: Realtek Audio Transcoder, Realtek 5.1 Channel High Fidelity Audio. Audio output: Front Out/Front Speaker Out. Audio input: Microphone input, Audio input.
- Ethernet: 1 x Realtek PCIe Gigabit LAN.
- Expansion slots: 1 x PCIe 3.0 x16, 1 x PCIe 3.0x4, 1 x PCIe 2.0 x1, 2 x M.2 NVME PCIe 3.0X4 (key M) 2242/2260/2280.
2.2 Packing List
Please confirm that the motherboard is properly packaged upon purchase of the product. If there is any damage to packaging or lack of accessories, contact us as soon as possible.
- 1 x HUANANZHI X99-QD4 Motherboard
- 1 x SATA data cable
- 1 x User manual
- 1 x Warranty card

3. Motherboard Layout


3.1 Rear I/O Panel
The rear I/O panel provides various ports for connecting peripherals.

| Connection/Work Light Status | Description | Speed Signal Status | Description |
|---|---|---|---|
| Turn Off | Network Not Connected | Turn Off | Transmission rate 10 Mbps |
| Yellow | Network Connected | Green | Transmission rate 100 Mbps |
| Flicker | Network In Use | Orange | Transmission rate 1 Gbps |
3.2 Audio Port Configuration
| Audio Port | Function |
|---|---|
| Green | Audio Output / Front Speaker Output |
| Blue | Audio Input |
| Pink | Microphone Input |
4. Installation and Setup
Please check the motherboard where all pins marked with number “1” or white bold line are position “1”.
4.1 Clear CMOS Jumper (CLR-CMOS)
To clear CMOS settings, locate the CLR-CMOS jumper on the motherboard. Refer to the motherboard illustration for its exact location.
4.2 Front Panel Connectors
Connect the front panel cables (Power LED, Power SW, HDD LED, Reset SW) to the F_PANEL1 header. Ensure correct polarity for LEDs.
| Pin | Description | Pin | Description |
|---|---|---|---|
| 1 | N.C (No Connection) | 2 | KEY (Key Pin) |
| 3 | RESET (Reset Switch) | 4 | PWR_SW (Power Switch) |
| 5 | RESET (Reset Switch) | 6 | PWR_SW (Power Switch) |
| 7 | HDD_LED- (HDD LED Negative) | 8 | PWR LED- (Power LED Negative) |
| 9 | HDD_LED+ (HDD LED Positive) | 10 | PWR LED+ (Power LED Positive) |
4.3 Front Audio Output Ports
Connect your chassis's front audio panel to this header.
| Pin | Description | Pin | Description |
|---|---|---|---|
| 1 | MIC+ (Microphone Positive) | 2 | Ground |
| 3 | Vbias (Microphone Voltage Bias) | 4 | AuD_Vcc(AVCC) (Audio Power) |
| 5 | L_R_Out (Right Channel Output) | 6 | R_Out Back (Right Channel Output Return) |
| 7 | KEY (Key Pin) | 8 | N.C (No Connection) |
| 9 | L_L_Out (Left Channel Output) | 10 | L_Out Back (Left Channel Output Return) |
4.4 USB 2.0 Expansion Ports
Connect additional USB 2.0 ports from your chassis to these headers.
| Pin | Description | Pin | Description |
|---|---|---|---|
| 1 | VCC (Power Positive) | 2 | VCC (Power Positive) |
| 3 | D- (Data Negative) | 4 | D- (Data Negative) |
| 5 | D+ (Data Positive) | 6 | D+ (Data Positive) |
| 7 | GND (Ground) | 8 | GND (Ground) |
| 9 | N.C (No Connection) | 10 | KEY (Key Pin) |
4.5 USB 3.0 Interface
Connect additional USB 3.0 ports from your chassis to this header.
| Pin | Description | Pin | Description |
|---|---|---|---|
| 1 | Power | 2 | USB3_RX_DN |
| 3 | USB3_RX_DP | 4 | Ground |
| 5 | USB3_TX_C_DN | 6 | USB3_TX_C_DP |
| 7 | Ground | 8 | USB2.0- |
| 9 | USB2.0+ | 10 | GND |
| 11 | USB2.0+ | 12 | USB2.0- |
| 13 | Ground | 14 | USB3_TX_C_DP |
| 15 | USB3_TX_C_DN | 16 | Ground |
| 17 | USB3_RX_DP | 18 | USB3_RX_DN |
| 19 | Power | 20 | N.C (No Connection) |
4.6 CPU Installation
To properly place the CPU in the motherboard, the surface of the LGA2011-3 CPU has two pairs of starting points and a golden triangle. The golden triangle indicates Pin1.

4.7 M.2 Interface Installation
- Remove the screw from the screw base.
- Remove the screw base.
- Tighten the screw base screwed into the length M.2 module to the M.2 interface distance hole.
- Insert your M.2 module into the M.2 interface at a 30-degree angle.
- Place the screw on the trailing edge notch of your M.2 module and tighten to the screw base.
4.8 Memory Installation
- Pull the clips on both ends of the memory slot outward, and the memory strip corresponds to the protruding position of the slot to determine the direction of installation.
- Align the memory module into the slot and press.
- Let the snaps on both ends of the slot automatically bounce.
4.9 Graphics Card Installation
- Use a screwdriver to remove the bezel and screws on the main unit.
- Need to pick up the card slot of the card slot when installing the graphics card.
- Insert the graphics card into the card slot of the graphics card.
- After the installation is in place, the chuck will automatically return to its position.
- Secure the graphics card to the chassis with screws.
- Install the power cord.
5. Driver Installation
5.1 Driver Directory Overview
| Driver Directory | Driver Description | Operating System |
|---|---|---|
| X99-QD4 Chipset Driver | Intel chip information installation | win7/win10 |
| X99-QD4 Sound Card Driver | Realtek series sound card driver installation | win7/win10 |
| X99-QD4 LAN Driver | Realtek network card driver installation | win7/win10 |
5.2 Intel Chip Information Installation
Run “Control Panel - System - Hardware - Device Manager”. Click the right mouse button to change the driver's hardware device and proceed with the installation below:
- Select: Property - Update driver - Not connect to Internet - Manually installation.
- Find the corresponding directory.
- Select "Next step".
5.3 Audio Driver Installation
Before this installation, please check the model of the audio chip on the motherboard first (you may refer to this manual), Select the proper driver accordingly for installation.
5.3.1 Audio driver installation (take HD Audio series for example)
- Run "driver installer": /X99-QD4 Realtek Audio/setup.exe.
- Click on "next" to continue, and then "finished".
- The system will automatically restart itself to finish the installation.
5.3.2 Uninstallation of audio driver (take HD Audio series for example)
Getting into Windows desktop, choose "setting" / "control", and then "add/remove programs". Later, choose "Realtek High Definition Audio Driver" in the menu and click on "add/remove" so that the driver will be automatically removed.
5.4 External Video Card Driver Installation
- Run "driver installer", take Setup.exe.
- Click on "next" - "yes".
6. BIOS Settings
To enable the computer to work well or execute specific functions, CMOS SETUP normally stores all kinds of data in CMOS SRAM of the motherboard. When the computer is shut down, motherboard's battery will supply power to CMOS SRAM. When the computer is turned on and starts POST (Power On Self Test), press “Delete/Del” key to enter into AMI BIOS CMOS SETUP main page. Motherboard warm boot key is “F7”.
Menu Description: Please pay attention to every option in the settings menu. When there is a triangle shaped symbol on the left side of menu, it means that you choose this sub-menu, so a pop-up sub-menu will be available.
6.1 Main Menu Function
| Menu | Description |
|---|---|
| Main | System Overview, Date/Time settings, HDD specs/Monitor type settings. |
| Advanced | Advanced Settings, BIOS special function settings (e.g., virus alert, booting disk priority). |
| Chipset | Advanced Chipset Settings. |
| Boot | Boot Settings. |
| Security | Security Settings (BIOS password settings). |
| Save | Save Setting. |
| Exit | Exit Options (loading optimized defaults, fail-safe defaults, discarding changes, exiting without saving). |
7. Specifications

| Attribute | Value |
|---|---|
| Brand Name | HUANANZHI |
| Model | X99-QD4 |
| Socket Type | LGA 2011-3 |
| Chipset Manufacturer | Intel |
| Chipset | Q87 |
| Processor Compatibility | Intel Others |
| With CPU | No |
| Support Memory Type | DDR4 |
| Maximum RAM Capacity | 128 GB |
| PCI - E Standards | PCI-E 3.0 |
| Number of PCI | 1 |
| Storage Interface Type | M.2 (NVMe) |
| RAID Supported | No |
| Onboard LAN | 1x RJ45 |
| Back I/O Ports | 1x RJ45 |
| Usage Scenario | Enthusiast & Overclocking, Gaming, Office |
| Special Features | None |
| Package | Yes |
| Battery Included | Yes |
| High-concerned chemical | None |
| Origin | Mainland China |
| Application | Desktop, Laptop |
| Package Length | 28 cm |
| Package Width | 22 cm |
| Package Height | 10 cm |
| Package Weight | 1.5 kg |
8. Troubleshooting
- System Fails to Boot: Check all power connections (24-pin ATX, 8-pin CPU), ensure RAM modules are seated correctly in their slots, and verify the CPU is properly installed. Clear CMOS if necessary.
- No Display Output: Ensure the graphics card is fully seated in the PCIe slot and connected to power (if required). Check monitor connections and input source. If using integrated graphics (not applicable for this platform without a CPU with iGPU), ensure the display cable is connected to the motherboard.
- Peripherals Not Detected: Verify USB devices are connected to the correct ports. For PS/2 devices, ensure they are connected before booting. Check device manager for driver issues.
- Network Connectivity Issues: Check LAN cable connection. Verify LAN drivers are installed correctly. Check LAN port status lights (Table 3.1).
- Audio Not Working: Ensure audio cables are correctly connected to the front panel or rear I/O. Verify audio drivers are installed. Check audio settings in the operating system.
- M.2 SSD Not Detected: Ensure the M.2 drive is properly installed and secured. Check BIOS settings to ensure the M.2 slot is enabled and configured correctly (e.g., NVMe mode).
9. User Tips
- BIOS Updates: Regularly check the manufacturer's website for BIOS updates to improve compatibility and performance.
- Cable Management: Proper cable management improves airflow and makes future maintenance easier.
- Static Discharge: Always discharge static electricity from your body before handling internal components to prevent damage.
- Driver Installation Order: Install chipset drivers first, then LAN, audio, and finally graphics card drivers for optimal system stability.
- Thermal Paste: When installing the CPU cooler, ensure an even application of thermal paste for efficient heat dissipation.
10. Warranty and Support
This product comes with a warranty card included in the package. Please refer to the warranty card for specific terms and conditions.
For technical support or assistance with installation, please contact HUANANZHI after-sales customer service via email at business@huananzhi.com.
An electronic version of this user manual is available for download: HUANANZHI X99-QD4 User Manual (PDF).