Astrowind 2-in-1 Wireless CarPlay Android Auto Adapter

Contents

Astrowind 2-in-1 Wireless CarPlay Android Auto Adapter

User Manual

Model: 2-in-1 Wireless CarPlay Android Auto Adapter

Introduction

This manual provides detailed instructions for setting up, operating, and troubleshooting your Astrowind 2-in-1 Wireless CarPlay Android Auto Adapter. This device allows you to convert your car's wired CarPlay or Android Auto system into a wireless one, enhancing your driving experience with seamless smartphone integration.

Please read this manual carefully before use and keep it for future reference.

Compatibility

Supported Devices

  • Only overseas Android phones are supported.
  • Supports iPhone 6 and later iPhone models.
  • The iPhone system version needs to be iOS 10 and above.
  • Important: Only for cars with wired Apple CarPlay or Android Auto.

How to find out if your car has Apple CarPlay?

  1. Method 1: Plug your iPhone into the main USB port of the car. If the car has an Apple CarPlay function, the app will pop up on the screen requesting permission on your phone.
  2. Method 2: If there is a CarPlay icon in the car stereo menu, your car has built-in Apple CarPlay.
  3. Method 3: Contact your car dealer for help.

For a list of supported car models, please check the Apple website: https://www.apple.com/ios/carplay/available-models/

Compatibility chart showing various car brands and phone models supported by the adapter.
Image: Compatibility chart illustrating supported car brands (e.g., Mercedes, VW, Land Rover, Volvo, Skoda, Nissan, Citroen, Peugeot, Ford, Hyundai, Alfa Romeo, Chevrolet) and phone models (iPhone 6 and above, Android 11 and above).

Setup Instructions

Follow these steps to set up your wireless adapter:

  1. Start your car and wait for the car head unit system to be fully loaded.
  2. Connect the wireless CarPlay/Android Auto dongle to your vehicle's USB or USB-C port. If your car has multiple ports, ensure you plug the dongle into the port designated for wired CarPlay/Android Auto.
  3. Turn on your iPhone's Wi-Fi. The adapter, named "Smart BOX -xxxx" (where xxxx is a unique identifier), will appear in the list. Do not connect to it or any other Wi-Fi network at this time; just keep Wi-Fi on and unoccupied.
  4. Turn on your phone's Bluetooth. Search for the adapter "Smart BOX -xxxx" in the Bluetooth device list and click to pair. After a few seconds, your phone will prompt "Use CarPlay/Android Auto". Click this prompt and wait 5-15 seconds for a successful connection.
  5. After the initial pairing, the wireless CarPlay/Android Auto dongle will automatically reconnect to your phone when you use it again (ensure your phone's Wi-Fi and Bluetooth are turned on). In some cars, you may need to select the "Start automatically" option in the CarPlay/Android Auto settings to activate this function.
Diagram showing the 3-step easy setup process for the wireless CarPlay adapter.
Image: Visual guide for the 3-step setup: 1. Plug the adapter into the car's USB port. 2. Turn on phone's Wi-Fi and Bluetooth. 3. Pair with 'SmartDongle' via Bluetooth and confirm CarPlay usage.
Video: A demonstration of the setup process, showing how to plug the adapter into the car's USB port, enable Wi-Fi and Bluetooth on a smartphone, pair with the 'SmartDongle', and initiate CarPlay. It also shows voice commands for calling and navigation, and music playback.

Operating Instructions

Once connected, your car's display will mirror your phone's CarPlay or Android Auto interface. You can interact with it using various methods:

  • Touch Control: Directly interact with the car's touchscreen display.
  • Knob Control: Use your car's existing control knobs for navigation.
  • Key Press Control: Utilize your car's physical buttons for various functions.
  • Voice Control (Siri/Google Assistant): Activate your phone's voice assistant (e.g., "Hi Siri") to make calls, open maps, navigate, and control music hands-free.
Image showing different control methods for CarPlay/Android Auto: Key Press Control, Knob Control, Touch Control, and Voice Control.
Image: Illustration of how to control the CarPlay/Android Auto interface using the car's existing controls, including key presses, rotary knobs, touchscreen, and voice commands.

Working Principle

The wireless CarPlay/Android Auto adapter uses Bluetooth to establish an initial pairing between your phone and the vehicle. After successful pairing, it switches to using Wi-Fi to maintain the wireless connection for data transfer.

Important Considerations:

  • When using wireless CarPlay/Android Auto, your phone's Wi-Fi will be occupied by the dongle. Other Wi-Fi networks cannot be used simultaneously. If conflicts arise, you may need to manually disconnect from other Wi-Fi networks to ensure stable CarPlay/Android Auto operation.
  • The auto-connection feature requires your phone's Wi-Fi and Bluetooth to be available and turned on.

Firmware Upgrade

Firmware upgrades are generally not recommended if the dongle is working correctly, as the current version is likely suitable for your car. Only attempt an upgrade if you encounter unresolved issues not covered in the troubleshooting section.

Upgrade Steps:

  1. Power up the adapter. It is recommended to use a charging-only port for this process.
  2. Connect to the dongle's Wi-Fi network. The password is "12345678".
  3. Open your phone's Safari browser and enter "192.168.18.9" in the address bar, then tap "Update".
  4. On the same page, you can also fill in your car's make, model, year, and issue details. Tap "Submit" to report the issue to the engineers for possible solutions.
  5. After the upgrade is complete, restart your phone once before using the dongle.

If problems occur after the upgrade, please perform a "Restore factory settings" through the same interface.

Troubleshooting (FAQs)

1. What is the password to connect to Wi-Fi?

You connect to the dongle via Bluetooth, not Wi-Fi directly for the initial pairing. No password is required for Bluetooth connection. Ensure your Wi-Fi is turned on and not occupied by other networks during pairing.

2. The indicator light of the dongle is still on after the car is turned off.

This is normal. Your car may not immediately cut off all power when turned off, so the dongle's light will remain on for a short period. The power consumption is minimal and will not drain your car battery.

3. Can't find the Bluetooth or Wi-Fi of the dongle?

If convenient, test with another phone. If only a specific phone cannot find the dongle, try resetting that phone's network and Bluetooth settings and restarting it. If the problem persists across multiple phones, the unit may be defective.

4. Audio input or output issues (e.g., calls rejected, no sound, microphone not working, music interrupted)?

  1. Check your phone's Bluetooth. If it's connected to another device, ignore other auto-connected Bluetooth devices or turn off Bluetooth directly.
  2. Clear any programs running in the background of your phone while using the dongle.
  3. During a call, ensure your "Audio" output option is set to CarPlay/Android Auto.

Note: Bluetooth is primarily for pairing. Once paired, Wi-Fi handles the connection. However, Bluetooth must be on for automatic reconnection.

5. Persistent disconnection?

  1. The dongle relies on a Wi-Fi connection. Disconnections are often due to Wi-Fi interference. If you have other Wi-Fi devices in your car (e.g., a car camera), you may need to ignore those networks.
  2. Resetting your mobile WLAN network settings can help.
  3. Consider updating the firmware as described in the "Firmware Upgrade" section.

6. Can the adapter be paired with multiple phones?

Yes, the dongle can be paired with multiple phones, but only one device can be connected at a time. To pair a new phone, disconnect the current connection first.

7. Unable to automatically reconnect?

  1. In some cars, you may need to select "automatic connection" in the CarPlay/Android Auto settings.
  2. Check phone settings: Go to Settings > WLAN > Ask to Join Networks: select "Notify"; or Settings > WLAN > Click the "i" symbol next to "Smart BOX -xxxx" > Turn on "Auto-Join".

8. When the phone plays videos, the audio is not synchronized with the video?

This is a normal characteristic of wireless CarPlay/Android Auto, not an adapter defect. Video transcoding is more complex and takes longer to process than audio files, leading to a slight audio delay.

9. Car screen goes black after pairing?

  1. For the first-time pairing, keep Wi-Fi on (no manual connection needed yet) and perform Bluetooth pairing. Once Bluetooth pairing is successful, Wi-Fi should automatically connect to the dongle. Observe if your Wi-Fi status changes to connected.
  2. If not, unplug the dongle, ignore "Smart BOX -xxxx" on your Bluetooth list, restart your phone, then plug the dongle back in and repair.
  3. If the issue persists, try upgrading the firmware.

User Tips:

  • Always ensure your phone's Wi-Fi and Bluetooth are enabled for seamless automatic connection.
  • If experiencing connection issues, try resetting your phone's network settings as a first step.
  • For optimal performance, avoid connecting to other Wi-Fi networks while using the adapter.

Specifications

FeatureDetail
Product TypeWireless CarPlay/Android Auto Adapter
ConnectivityUSB, USB-C, Wi-Fi, Bluetooth
Supported PhonesiPhone 6 and later (iOS 10+), Overseas Android phones (Android 11+)
Dimensions (Adapter)Approx. 2.56 inches (length) x 1.81 inches (width) x 0.37 inches (thickness)
Package Dimensions17 cm (length) x 14 cm (width) x 2 cm (height)
Package Weight0.087 kg

Package Contents

The product package includes the following items:

  • 1 x Wireless CarPlay/Android Auto Adapter
  • 1 x USB to USB-C Adapter
  • 1 x User Manual
Image showing the wireless CarPlay adapter, its box, and the included user manual.
Image: The adapter, its retail packaging, and the instruction manual.

Support

For further assistance or if your problem is not resolved after following the troubleshooting steps, please refer to the full user manual PDF for more detailed information or contact customer support.

You can view the full user manual here: User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.