1. Product Overview
The Yinuogo 2-Channel Wireless Remote Control Relay Module is a versatile device designed to control various electrical appliances such as gate lights, LED lights, fanner motors, and other electrical machinery. It operates on a 433MHz frequency and supports both DC (6-30V) and AC (85-250V) power inputs, offering flexible application options. The module utilizes a learning code system for easy pairing with remote controls.

Figure 1: Yinuogo 2-Channel Wireless Remote Control Relay Module and Remotes
2. Specifications
| Feature | Specification |
|---|---|
| Model Numbers | YNG210, YNG213 |
| Operating Voltage | DC 6-30V / AC 85-250V |
| Frequency | 433MHz / 433.92MHz |
| Encoding Method | Learning Code (EV1527 compatible) |
| Static Working Current | ≤10mA |
| Output Current | ≤10A |
| Operating Temperature | -40℃ to +80℃ |
| Receive Sensitivity | ≥-100dB |
| Certifications | CE, FCC, RoHS, WEEE |
| Module Dimensions | Approx. 50mm (L) x 40mm (W) x 25mm (H) |
3. Setup and Wiring
3.1 Component Identification

Figure 2: Relay Module Components and Wiring Overview
- RELAYS: Two independent relays for switching circuits.
- RECEIVE MODULE: Integrated circuit for receiving RF signals from the remote.
- CODE BUTTON: Used for pairing remote controls and clearing codes.
- LED LIGHT: Indicates status (power, pairing, relay activation).
3.2 Wiring Diagrams
Ensure power is disconnected before performing any wiring. Incorrect wiring can damage the module or connected devices.
3.2.1 DC 6-30V Input with DC Load (e.g., LED, Telescopic Rod)

Figure 3: DC 6-30V Input and Load Wiring
- Connect DC 6-30V power supply to the input terminals (positive and negative).
- For each load (Load NO1, Load NO2), connect one wire to the common terminal of the relay and the other wire to the normally open (NO) or normally closed (NC) terminal, depending on desired operation.
- For telescopic rods or electrical machinery, connect V+ and V- from the DC power supply to the respective terminals on the module, and then connect the motor leads to the relay outputs for forward/reverse control.
3.2.2 AC 85-256V Input with AC Load (e.g., Lights)

Figure 4: AC 85-256V Input and Load Wiring
- Connect AC 85-256V power supply to the input terminals (Live and Neutral).
- For each AC load (e.g., light bulbs), connect one side of the load to the common terminal of the relay. Connect the other side of the load to the neutral line of the AC supply.
- Connect the live line of the AC supply to the normally open (NO) terminal of the relay.
3.2.3 Motor Wiring Method (AC Motor Example)

Figure 5: AC Motor Wiring for Forward/Reverse
- Connect AC Live (AC/L) and Neutral (AC/N) to the module's input.
- Connect the motor's Common (COM) lead to one of the relay's common terminals.
- Connect the motor's Forward lead to one relay's NO terminal and the Reverse lead to the other relay's NO terminal.
- Ensure appropriate interlocks are programmed (Interlocked mode) to prevent simultaneous activation of forward and reverse.
4. Operating Modes and Pairing
The module supports several operating modes. The remote control requires two CR2016 batteries (not included).
Video 1: Demonstration of Inching, Interlocking, and Clear Code Modes
4.1 Clear Code Mode
This mode clears all previously learned remote control key codes from the module.
- Press the CODE BUTTON on the receiver module 8 times in quick succession.
- The LED indicator light will flash continuously 4 times and then turn off, indicating that all codes have been cleared.
4.2 Pairing Remote Controls (Pattern Matching)
After clearing codes, you can pair your remote control(s) to the desired operating mode.
4.2.1 Jog Mode (Momentary)
In this mode, the relay is active only while the remote button is pressed. Releasing the button deactivates the relay.
- Press the CODE BUTTON on the receiver module 1 time.
- The LED indicator light will turn off.
- Press the desired button on your remote control (e.g., Button A). The LED will flash 3 times and then turn off.
- Press another desired button on your remote control (e.g., Button B). The LED will flash 3 times and then remain on, indicating successful pairing for both channels in Jog mode.
4.2.2 Self-Locking Mode (Toggle)
In this mode, pressing the remote button once activates the relay, and it stays active. Pressing the same button again deactivates the relay.
- Press the CODE BUTTON on the receiver module 2 times.
- The LED indicator light will turn off.
- Press the desired button on your remote control (e.g., Button A). The LED will flash 3 times and then turn off.
- Press another desired button on your remote control (e.g., Button B). The LED will flash 3 times and then remain on, indicating successful pairing for both channels in Self-Locking mode.
4.2.3 Interlocked Mode (Latched)
In this mode, pressing one remote button activates its corresponding relay and deactivates any other active relay. Only one relay can be active at a time.
- Press the CODE BUTTON on the receiver module 3 times.
- The LED indicator light will turn off.
- Press the desired button on your remote control (e.g., Button A). The LED will flash 3 times and then turn off.
- Press another desired button on your remote control (e.g., Button B). The LED will flash 3 times and then remain on, indicating successful pairing for both channels in Interlocked mode.
4.2.4 Move and Lock Along the Way Mode (Sequential/Delay)
This mode typically involves a sequence or delay function. Refer to specific application needs for detailed usage.
- Press the CODE BUTTON on the receiver module 4 times.
- The LED indicator light will turn off.
- Press the desired button on your remote control (e.g., Button A). The LED will flash 3 times and then turn off.
- Press another desired button on your remote control (e.g., Button B). The LED will flash 3 times and then remain on, indicating successful pairing for both channels in this mode.
5. Maintenance
5.1 Remote Control Battery Replacement
The remote control uses two CR2016 lithium batteries.

Figure 6: Remote Control and Battery Type
- Carefully open the remote control casing.
- Remove the old batteries.
- Insert two new CR2016 batteries, ensuring correct polarity.
- Close the remote control casing securely.
5.2 General Cleaning
Wipe the module and remote controls with a dry, soft cloth. Do not use liquid cleaners or solvents.
6. Troubleshooting
- Remote control not working:
- Check if the remote control batteries are installed correctly and have sufficient charge.
- Ensure there is no rust or debris in the battery compartment; clean contacts if necessary.
- Clear all codes from the receiver module and re-pair the remote control according to the desired operating mode.
- Relay not activating:
- Verify that the module is receiving power (check LED indicator).
- Inspect all wiring connections for correctness and security.
- Ensure the connected load is within the module's 10A output current limit.
- Poor remote control range:
- Ensure there are no major obstructions (thick walls, metal objects) between the remote and the receiver.
- Avoid placing the receiver near sources of strong electromagnetic interference.
7. User Tips
- Isolated Outputs: This controller features outputs that are isolated from the inputs, which can be beneficial for certain applications, especially in marine environments.
- Limit Switches: Diodes can be used with this controller if you wish to integrate limit switches into your setup.
- Battery Reminder: Remote controls typically do not include batteries. Remember to purchase two CR2016 batteries for each remote.
- Programming Practice: While versatile, programming the various modes might require a few attempts to get familiar with the sequence. Refer to the video demonstration if needed.
8. Frequently Asked Questions (FAQ)
Q: How many amperes can the relay handle?
A: Each relay can handle a maximum output current of 10 Amperes.
Q: How many remote controls can be paired with one receiver?
A: The receiver module can typically learn codes from multiple remote controls. The exact number can vary, but it's usually sufficient for common household or small business applications.
Q: Can I use this module to control both AC and DC devices simultaneously?
A: Yes, the module supports both AC (85-250V) and DC (6-30V) power inputs and can control corresponding loads. However, ensure proper isolation and wiring for each circuit.
9. Warranty and Support
For warranty information, technical support, or further assistance, please contact your retailer or the manufacturer directly. Keep your purchase receipt for warranty claims.