zime Z1

Contents

zime Z1 20000mAh Portable Power Bank User Manual

Model: Z1

Introduction

Thank you for choosing the zime Z1 Portable Power Bank. This device is designed to provide reliable and fast charging for your electronic devices on the go. With a high capacity of 20000mAh and support for various fast charging protocols, including 55W Max PD, QC, SCP, and PPS, it ensures your devices stay powered throughout your journey. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your power bank.

For a detailed PDF version of this manual, please refer to the official document: User Manual (PDF).

Safety Information and Warnings

▲ WARNING

  • Do not disassemble, crush, puncture, short-circuit, or expose the power bank to fire or temperatures exceeding 40°C (104°F).
  • Do not use the power bank if it is swollen, leaking, or visibly damaged. Immediately discontinue use if any abnormality occurs.
  • Use only appropriate and certified power adapters for charging the power bank.
  • Keep the power bank out of reach of children.
  • If liquid from the battery comes into contact with your eyes, rinse immediately with clean water and seek medical attention.
  • The power bank features NTC (Negative Temperature Coefficient) protection, which will automatically shut off output if the internal temperature exceeds safe operating limits.
  • Clean the device with a dry, soft cloth only.
  • This power bank is certified with RoHS and CE standards.
  • The 20000mAh capacity is generally permissible for air travel, but always check with your airline's regulations before flying.

Package Contents

Please check the package for the following items:

  • zime Z1 Portable Power Bank
  • USB-C to USB-C Charging Cable (built-in)
  • User Manual
  • Quality Certificate

Product Overview

The zime Z1 power bank features a compact design with a digital display and built-in cables for convenience.

zime Z1 Power Bank with 55W Max Super Flash Charging

Figure 1: zime Z1 Power Bank highlighting 55W Max Super Flash Charging and certifications.

White zime Z1 Power Bank showing ports and digital display

Figure 2: Side view of the zime Z1 Power Bank, illustrating the digital display and port layout.

Key Features:

  • 55W MAX Super Fast Charge: Unlocks a new level of high-power charging for your phone.
  • Highly Portable: Built-in cable for on-the-go use. One device, one cable, total control in one hand.
  • High-Capacity: 20000mAh battery provides uninterrupted power for your journey.
  • Intelligent Design: Precise digital display for clear battery level monitoring.
  • Ultra-Efficient: Charge multiple devices simultaneously.
  • Superb Looks: Available in vibrant colors (White, Gray, Pink, Blue).
Diagram showing key features of the zime Z1 Power Bank

Figure 3: Visual representation of the zime Z1's key features.

Specifications

Attribute Specification
Brand Namezime
ModelZ1
Battery TypeLithium battery
Battery Capacity20000mAh (74Wh)
Rated Capacity12000mAh (5V/3A)
Input InterfaceUSB-C: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/2.25A (45W Max)
Built-in USB-C cable: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/2.25A (45W Max)
Output InterfaceUSB-C: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/2.75A (55W Max)
Built-in USB-C cable: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/2.75A (55W Max)
USB-A: 5V/3A, 9V/2A, 12V/1.5A (18W Max)
Support Quick Charge TechnologyTwo-way Quick Charge (PD3.0, QC4+, QC3.0, QC2.0, SCP, FCP, AFC, PPS, UFCS)
Max Output55W (USB-C/Built-in USB-C cable)
Shell MaterialMetal
DimensionsApprox. 130mm x 65mm x 30mm
Weight0.6 kg
CertificationRoHS, CE
OriginMainland China

Note: The maximum output of 55W is achieved under specific conditions and with compatible devices/cables supporting PPS protocol. Some testing equipment may report different maximums (e.g., 30W or 44W) depending on the protocol being tested or the device's charging state.

Setup and Charging the Power Bank

Charging the Power Bank:

  1. Connect the built-in USB-C cable or an external USB-C cable to the power bank's input port.
  2. Connect the other end of the cable to a compatible USB power adapter (e.g., a 45W or higher PD charger for optimal speed).
  3. The digital display will show the charging progress, indicating the battery percentage increasing.
  4. When the display shows "100", the power bank is fully charged.
Power bank being charged with a wall adapter

Figure 4: The power bank undergoing 40W Max high-speed self-charging.

Operating Instructions

Checking Battery Level:

Press the power button once to activate the digital display, which will show the current battery percentage.

Charging Your Devices:

  1. Connect your device to the power bank using the built-in USB-C cable or an external USB-C/USB-A cable.
  2. The power bank will automatically detect your device and begin charging. The digital display will show the remaining battery percentage.
  3. For optimal fast charging, ensure your device and cable support the power bank's fast charging protocols (PD, QC, SCP, PPS, UFCS).
iPhone being charged by the power bank at 45W Max

Figure 5: Illustrates 45W Max PD fast charging for iPhone models.

Power bank charging multiple devices including a tablet and smartphone

Figure 6: Demonstrates the 20000mAh capacity charging various devices.

Button Functions:

  • Single Click: Turns on the power bank and initiates forced output.
  • Long Press (2 seconds): Turns off the power bank.
  • Double Click: Enters or exits small current mode. This mode is suitable for charging low-power devices like smartwatches, Bluetooth earbuds, or fitness trackers.

Maintenance

  • Store the power bank in a cool, dry place away from direct sunlight and extreme temperatures.
  • Avoid dropping or subjecting the power bank to strong impacts.
  • Do not expose the power bank to water or other liquids.
  • If the power bank will not be used for an extended period, charge it to approximately 50-75% every three months to maintain battery health.
  • Keep the ports free from dust and debris. Use a dry, soft brush if necessary.

Troubleshooting

Problem Possible Cause / Solution
Power bank cannot be charged.
  • Check if the power adapter and charging cable are properly connected.
  • Ensure the power adapter's output voltage and current are compatible with the power bank's input requirements (e.g., 45W PD charger).
  • Try a different power adapter and cable.
Power bank cannot charge other devices.
  • Check if the charging cable is securely connected to both the power bank and the device.
  • Ensure the device's input voltage and current are compatible with the power bank's output.
  • The power bank might be in small current mode. Double-click the power button to exit this mode.
  • The power bank's battery might be depleted. Recharge the power bank.
  • Try a different charging cable.
Charging speed is slow.
  • Ensure both your device and the charging cable support fast charging protocols (PD, QC, SCP, PPS, UFCS).
  • Check if the power bank is sufficiently charged. Fast charging performance may decrease at very low battery levels.
  • Some devices may limit charging speed based on battery percentage or temperature.
Digital display is not working.
  • Press the power button once to activate the display.
  • If the power bank is completely discharged, the display may not light up until it receives some charge.

If problems persist after trying the above solutions, please contact zime customer support for assistance.

User Tips

  • Verify Charging Protocols: While the power bank supports up to 55W Max output, actual charging wattage can vary significantly based on the device being charged, the cable used, and the specific charging protocol negotiated. For example, some users report actual outputs around 30W or 44W with certain devices or testers. Ensure your device supports PPS for the highest possible speeds.
  • Check Battery Level for Max Output: Some users have noted that the highest wattage output might be achieved when the power bank's battery is above a certain percentage (e.g., 80%).
  • Use Quality Cables: Always use high-quality, certified cables that support fast charging to ensure optimal performance and safety. The built-in cable is designed for this purpose.
  • Small Current Mode for Low-Power Devices: Remember to double-click the power button to activate small current mode for devices like smartwatches or Bluetooth headphones to prevent overcharging or damage.

Warranty and Support

The zime Z1 Portable Power Bank comes with a 3-month warranty from the date of purchase, covering manufacturing defects and product quality issues under normal use.

This warranty does not cover:

  • Damage caused by improper use, negligence, or accident.
  • Damage caused by unauthorized repair or modification.
  • Normal wear and tear.
  • Damage due to force majeure (e.g., natural disasters).

For warranty claims or technical support, please contact the zime Electronic Store directly through your purchase platform or their official website. Please have your proof of purchase ready.

© 2024 zime Electronic Store. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.