Introduction
Thank you for choosing Herdio 4" Waterproof Marine Speakers. This sound system is designed for versatile outdoor use, including boats, ATVs, UTVs, Jeeps, and patios, providing powerful and clear audio in various environments. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your speakers.
Package Contents
Please verify that all items listed below are included in your package:
- 4 x Herdio 4" Marine Speakers
- 1 x Bluetooth Amplifier (4-channel)
- 1 x 12V DC Power Cable
- 8 x Screws for mounting
- Speaker cables (white positive + black negative -)
- 1 x User Manual (Amplifier)

Setup and Installation
Follow these steps to properly install and connect your Herdio marine speakers.
Speaker Installation
The speakers feature an easy-to-install bracket that allows for flexible positioning. The mounting bracket can be removed and offers a 180-degree turning radius for optimal sound direction.
- Remove the Bracket: Turn the knob on the side of the speaker to loosen and remove the mounting bracket.
- Fix the Bracket: Use the provided screws to securely fix the bracket to your desired mounting surface.
- Attach Speaker: Place the speaker onto the fixed bracket and tighten it with the knob. Loosen the knobs slightly for more flexible speaker rotation, then tighten once the desired angle is achieved.

Wiring and Bluetooth Pairing
Connect the speakers to the amplifier and pair your Bluetooth device for audio playback.
- Speaker Cable Link to Amplifier: Use a screwdriver to connect the speaker cables to the amplifier terminals. The white wire is positive (+) and the black wire is negative (-). Connect Speaker 1 to L1+/L1-, Speaker 2 to L2+/L2-, Speaker 3 to R1+/R1-, and Speaker 4 to R2+/R2-.
- Plug in Power Supply: Connect the 12V DC power cable to the amplifier. The red wire links to your 12V battery positive terminal, and the black wire links to the negative terminal.
- Pairing Bluetooth & Playing Music:
- Ensure the power supply is connected and the blue LED on the amplifier is blinking, indicating it's waiting for pairing.
- Turn on your mobile device's Bluetooth and scan for available devices.
- Select the Bluetooth name "Herdio" from the list and click "Connect".
- Once connected, you will hear a confirmation tone, and the blue LED will turn solid.
- You can now play music from your device through the speakers.

Operating Instructions
The Bluetooth amplifier features several controls for managing your audio experience:
- Power On/Off (Button 1): Long press to power on/off. Short press to play/pause.
- Mode Switch (Button 2): Long press to reset. Short press to switch mode between BT (Bluetooth), USB, AUX, and MIC.
- Volume Down / TWS (Button 3): Press and hold to open TWS mode. Briefly press to decrease the volume.
- Volume Up / Mono (Button 4): Long press to switch stereo to mono. Short press to increase the volume.
- Previous Song (Button 5): Press and hold to go back. Short press to play the previous song.
- Next Song (Button 6): Long press for fast forward. Short press to play the next song.
Specifications
| Feature | Specification |
|---|---|
| Model No. | HMS-61 |
| Speaker Size | 4.4 Inch |
| MAX Power Output | 120W |
| Sensitivity | 89dB |
| Impedance | 4 Ohms |
| Frequency Response | 80-20KHz |
| Mounting Depth | 4 Inch (10 CM) |
| Voltage Range | Low voltage non-USB (below 75V DC, below 50V AC) |
| Input/Output | AUX |
| Bluetooth Version | 5.0 |
| Input Power(W) | 200-299W |
| PMPO | 240W |
| Channels | 2 (2.0) |
| Speaker Type | Outdoor Speaker |
| Cabinet Material | Plastic |
| Power Source | DC |


Maintenance
To ensure the longevity and optimal performance of your Herdio marine speakers, follow these maintenance guidelines:
- Cleaning: Regularly wipe down the speakers with a soft, damp cloth to remove dirt, salt, and other debris. Avoid using harsh chemicals or abrasive cleaners, as these can damage the speaker's finish and waterproof seals.
- Inspection: Periodically check all connections and mounting hardware for tightness. Ensure that no cables are frayed or exposed.
- Storage: If the speakers will not be used for an extended period, especially in harsh weather conditions, consider covering them or storing them in a protected area.
- Water Exposure: While waterproof, avoid submerging the speakers. After exposure to saltwater, rinse them gently with fresh water to prevent salt buildup.
Troubleshooting
If you encounter issues with your Herdio speakers, try the following solutions:
- No Power:
- Check that the 12V DC power cable is securely connected to both the amplifier and the power source.
- Ensure the power source (e.g., battery) is providing adequate power.
- Verify that the amplifier's power button is long-pressed to turn it on.
- No Sound:
- Confirm that the speaker cables are correctly and securely connected to the amplifier terminals (white to positive, black to negative).
- Check the volume level on both your connected device and the amplifier.
- Ensure the amplifier is in the correct mode (BT, USB, AUX, MIC) for your audio source.
- Bluetooth Not Connecting:
- Make sure the amplifier's blue LED is blinking, indicating it's in pairing mode.
- Ensure your mobile device's Bluetooth is enabled and within range.
- Forget the device "Herdio" from your mobile device's Bluetooth settings and try pairing again.
- Restart both your mobile device and the amplifier.
- Distorted Sound:
- Reduce the volume on both your device and the amplifier.
- Check for any loose speaker wire connections.
- Ensure the audio source is not distorted.
User Tips
- For optimal sound quality, ensure the speakers are pointed towards the listening area and securely tightened in place.
- When installing in a marine or outdoor environment, consider tilting the speakers slightly downwards to help shed water and prolong their lifespan.
- Always double-check the polarity of speaker wires (positive to positive, negative to negative) to prevent damage and ensure correct audio reproduction.
FCC Compliance
FCC Requirement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Warranty and Support
All Herdio speaker products have a 1-year Limited Warranty against defects in materials and workmanship. Proof of purchase must accompany all claims. During the warranty period, Herdio will replace any defective part and correct any defect in workmanship without charge for either parts or labor. If you have questions, you can contact us via E-mail: support@herdiotech.com
For further information, please visit: www.Herdiotech.com
You can also refer to the detailed user manual in PDF format for additional guidance: User Manual (PDF)