1. Package Contents
Please verify that all items listed below are included in your package:
- Herdio 4" Marine Speakers (x2)
- Bluetooth Amplifier (2-Channel) (x1)
- DC 12V Power Cable (x1)
- Mounting Screws (x4)
- User Manual (x1)

2. Setup and Installation
Follow these steps to properly set up and install your Herdio Marine Bluetooth Speakers.
2.1 Speaker Installation
The speakers are designed for surface mounting. Use the provided mounting brackets and screws for secure installation.
- Remove the Bracket: Turn the knobs on the side of the speaker to detach the mounting bracket.
- Fix the Bracket: Secure the mounting bracket to your desired surface using appropriate screws (not included).
- Attach Speaker: Place the speaker onto the fixed bracket and tighten it with the knobs.
- Adjust Speaker Angle: Loosen the knobs slightly to adjust the speaker's rotation for optimal sound direction. Once set, tighten the knobs securely. Tilting the speakers downwards can help protect them from weather elements.
2.2 Wiring the Speakers and Amplifier
Connect the speakers to the Bluetooth amplifier and then connect the amplifier to a 12V DC power source.
- Connect Speaker Cables to Amplifier: Use a screwdriver to loosen the terminals on the amplifier. Connect the speaker cables to the amplifier terminals. Ensure the white wire (positive +) and black wire (negative -) are correctly linked to the corresponding SPK L+ / SPK L- (Left Speaker) and SPK R+ / SPK R- (Right Speaker) terminals. Tighten the terminals to secure the wires.
- Connect Power Supply: Connect the DC 12V power cable to the amplifier's 'Power Jack'. The red wire from the power cable should be connected to the positive terminal of your 12V battery, and the black wire to the negative terminal.

3. Operating Instructions
3.1 Bluetooth Operations
The Herdio speakers feature Bluetooth 5.0 for wireless music streaming.
- Power On: Ensure the power supply is connected to the amplifier. The blue LED on the amplifier should start flashing, indicating it's in pairing mode.
- Pairing Mode: The flashing blue light signifies that the Bluetooth amplifier is ready for pairing.
- Connect Device: Turn on Bluetooth on your mobile device or other Bluetooth-enabled device. Scan for available devices and select "Herdio" from the list. Click to connect.
- Connection Confirmation: Once connected, you will hear a confirmation tone, and the blue LED on the amplifier will turn solid (stop flashing). This indicates a successful connection, and you can now stream music.

3.2 AUX Input
For devices without Bluetooth, you can use the 3.5mm Auxiliary Input on the amplifier to connect directly.
4. Maintenance
To ensure the longevity and optimal performance of your Herdio Marine Bluetooth Speakers, follow these maintenance guidelines:
- Cleaning: Use a soft, damp cloth to clean the speaker surfaces. Avoid harsh chemicals or abrasive cleaners.
- Water Protection: While the speakers are IPX6 waterproof, meaning they are protected against powerful water jets, avoid submerging them in water. Ensure all connections are secure to prevent water ingress.
- Storage: If storing the speakers for an extended period, ensure they are clean and dry. Store them in a cool, dry place away from direct sunlight and extreme temperatures.

5. Troubleshooting
If you encounter any issues with your speakers, refer to the following common problems and solutions:
- No Power:
- Check all power connections to ensure they are secure.
- Verify that the 12V DC power source is functioning correctly.
- Ensure the amplifier's blue LED is lit (flashing or solid).
- No Sound:
- Confirm that the speaker cables are correctly connected to the amplifier (white to positive, black to negative).
- Check the volume level on both your connected device and the amplifier.
- Ensure the Bluetooth device is properly paired and connected (solid blue LED).
- If using AUX input, ensure the cable is fully inserted and functioning.
- Bluetooth Connection Issues:
- Make sure the amplifier's blue LED is flashing, indicating pairing mode.
- Ensure your device's Bluetooth is turned on and scanning for devices.
- Try forgetting the "Herdio" device on your phone and re-pairing.
- Move your device closer to the amplifier to ensure it's within the Bluetooth range.
6. Specifications
| Feature | Specification |
|---|---|
| Model No. | HMS-61 |
| Speaker Type | Outdoor Speaker |
| Speaker Size | 4.4 inch (11.2 cm) |
| Max Power Output (PMPO) | 120W |
| Input Power (W) | 100-199 W |
| Sensitivity | 89dB |
| Impedance | 4 Ohm |
| Frequency Range | 65Hz-20KHz |
| Audio Crossover | Full-Range |
| Bluetooth Version | 5.0 |
| Input/Output | AUX |
| Waterproof Rating | IPX6 |
| Cabinet Material | Plastic |
| Tweeter Material | Metal |
| Woofer/Widerange Material | Other (Plastic) |
| Number of Loudspeaker Enclosure | 1 |
| Channels | 2 (2.0) |
| Mounting Depth | 4 Inch (10 CM) |
| Dimensions (W x H x D) | 4.4in (11.2cm) x 4.3in (11cm) x 4in (10.2cm) |

7. Warranty and Support
All Herdio speaker products come with a 1-year Limited Warranty against defects in materials and workmanship. To make a warranty claim, proof of purchase is required. During the warranty period, Herdio will replace any defective part or correct any defect in workmanship without charge for parts or labor.
For questions or support, please contact us via email:
Email: support@herdiotech.com
8. User Tips
- Flexible Mounting: The adjustable knobs on the speakers allow for easy rotation, providing flexibility in directing sound. Experiment with different angles to find the best audio experience for your specific environment.
- Bluetooth Indicator: Pay attention to the amplifier's blue LED. A flashing light means it's ready to pair, and a solid light confirms a successful connection. This helps quickly diagnose connection status.
- Outdoor Durability: These speakers are designed for marine and outdoor use with IPX6 waterproofing. While robust, ensure they are installed in a way that minimizes direct exposure to extreme weather conditions for prolonged periods to maximize lifespan.