Introduction
This manual provides essential information for the safe and efficient operation of your MARPOU KML121 Smart Induction Candle Lamp. Please read it thoroughly before use and retain it for future reference.
Safety Information
- Glass Components: The lamp features a glass lampshade. Please handle with care to prevent breakage.
- Charging: Always use the provided USB charging cable and follow the instructions for charging. Mind potential fire risks associated with improper charging.
- Battery Disposal: For disposal of the lithium-ion battery, please check your local authority's website for information and dispose of it safely in accordance with applicable legal requirements.
- Water Exposure: This product is not waterproof. Avoid exposure to water or high humidity.
- Children and Pets: While the lamp uses LED to simulate candlelight (no real flame, heat, or smoke), keep it out of reach of small children and pets to prevent accidental damage or injury.
Package Contents
- Candle Lamp x 1
- USB Charging Cable x 1
- Instruction Manual x 1
Product Features
- Smart Induction Control: Features an intelligent sensor switch for hand-wave control (ON/OFF) and hover dimming.
- Realistic Flickering Flame: Mimics the dynamic flicker of real candles with soft, warm light, utilizing patented candle flame swing technology.
- Two Lighting Modes: Easily switch between "Flame-Only Light" for subtle ambiance and "Flame + Body Dual Light" for warmer and brighter illumination.
- High-Efficiency LED: Provides high brightness without oily smoke or peculiar smells, making it safe and eco-friendly.
- Rechargeable & Portable: Equipped with a DC5V rechargeable power supply, offering up to 4 hours of operation at full load after a full charge.
- Versatile Application: Ideal for creating a warm and quiet atmosphere in homes, bars, hotels, or during camping.
Setup
- Unpacking: Carefully remove all components from the packaging. Handle the glass lampshade with care.
- Initial Charge: Before first use, fully charge the candle lamp using the provided USB charging cable. Connect the Type-C charging port on the lamp to a DC5V power source (e.g., computer USB port, USB wall adapter). The charging indicator will show the charging status.
- Battery Activation: Locate the ON/OFF switch for the batteries, usually on the bottom of the lamp. Ensure it is in the 'ON' position for the lamp to function.
Operating Instructions
The KML121 lamp features intelligent sensor control, allowing for touch-free operation.
- Power ON/OFF: Wave your hand over the top of the lamp (above the hand-wave sensing probe) to turn the light ON or OFF.
- Dimming: To adjust brightness, hover your hand steadily over the top of the lamp. The light will smoothly dim or brighten. Remove your hand when the desired brightness is achieved.
- Switching Lighting Modes: The lamp has two modes: "Flame-Only Light" and "Flame + Body Dual Lighting." To switch between these modes, perform a quick hand-sweep gesture over the sensor.
Maintenance
- Cleaning: To clean the lamp, gently wipe the glass and ABS body with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: When not in use for extended periods, store the lamp in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Recharge the lamp when the light output becomes noticeably dim.
Troubleshooting
- Q: The lamp does not turn on.
- A: Ensure the lamp is fully charged. Check the ON/OFF switch on the bottom of the lamp to make sure it is in the 'ON' position. If the issue persists, try recharging the lamp for a longer period.
- Q: The dimming function is not working smoothly.
- A: Ensure your hand is hovering steadily over the sensor without touching the lamp. Rapid or inconsistent hand movements may interfere with smooth dimming. Ensure the sensor area is clean and unobstructed.
- Q: The lamp's battery life seems shorter than expected.
- A: The lamp operates for approximately 4 hours at full brightness on a full charge. If you are using it at higher brightness settings, the battery will drain faster. Ensure the lamp is fully charged before each use. Battery performance can also degrade over time with repeated charge cycles.
Specifications
| Attribute | Value |
|---|---|
| Model | KML121 |
| Power | 3W |
| Material | Glass + ABS |
| Battery Type | Rechargeable Lithium battery (18650, 2400mAh) |
| Nominal Voltage | 4.5V |
| Voltage | 5V |
| Wattage | 0-5W |
| Luminous Flux | 60-249 lumens |
| Light Source | LED bulbs |
| Dimmable | Yes |
| Power Source | DC |
| Shade Type | Clear Glass |
| Shade Direction | Up & Down |
| Style | Modern Style |
| Certifications | RoHs, RoHS, LVD, CE |
| Dimensions | 8.5 cm (3.35 in) diameter, 13 cm (5.12 in) height |
| Weight | 0.361 kg |
| Operating Time (Full Load) | 4 hours |
User Tips
- Ambiance Creator: This lamp is perfect for setting a relaxing mood. Experiment with different dimming levels to find your ideal brightness for any occasion, from a cozy evening to a festive dinner.
- Wireless Freedom: Take advantage of its built-in rechargeable battery. Place it anywhere without worrying about power outlets, making it versatile for various indoor and outdoor (covered) settings.
- Safe Alternative: Enjoy the aesthetic of a candle without the fire hazard, smoke, or wax mess. It's a great choice for homes with children, pets, or in environments where open flames are not permitted.
Warranty & Support
This product comes with a 1-year warranty from the date of purchase, covering non-artificial damage. For specific service processes or support, please contact your dealer.
For detailed instructions and safety information, please refer to the complete user manual PDF available at https://manuals.plus/m/44bbc2ac5dd998d3aa1f42a7b376daa48a98d78528d30355355515fc0e0e4a3a.