Introduction
Thank you for purchasing the Godox Wireless Intercom System. Please read this manual carefully before use to ensure correct operation and optimal performance of your device.
Main Features
- Max. wireless transmission sight distance up to 500m.
- Environmental Noise Cancellation (ENC) for clear intercom.
- Provides 20-hour long-lasting battery life.
- Adaptive expansion system enables 2 to 5-user intercom.
- Detachable lithium battery supports charging via USB-C port or charging case.
- Lightweight and comfortable wearing with flexibly adjustable head circumference.
Safety Warnings
- The microphone is a precision device. Avoid dropping or impacting it to prevent damage.
- Keep out of reach of children.
- Do not disassemble, modify, or attempt to repair the product. Repairs should only be performed by Godox or an authorized service center.
- Keep the product dry. Do not use in rain or damp conditions, and do not immerse it in water.
- Do not store the product in direct sunlight, near heating devices, or in hot, humid, or dusty environments.
- Do not store the product if the ambient temperature exceeds 60°C.
- Do not use in flammable and explosive environments. Pay attention to relevant warning signs.
- Read and follow all warnings and instructions provided by the manufacturer.
- Keep small batteries out of reach of children.
- Never swallow batteries, as ingestion may cause burns. Seek immediate medical attention if swallowed.
Product Overview and Parts Identification
Familiarize yourself with the components of your SkyTalk Air headset:
- Battery Compartment Switch: Used to open/close the battery compartment.
- Volume Adjustment Dial: Rotate up to increase volume, rotate down to decrease volume.
- Microphone Rod: Lift up to turn on the microphone, lower to turn off the microphone.
- Pairing Button: Press and hold for 5 seconds to initiate pairing.
- Mute/PTT Mode Button: Controls mute and Push-To-Talk functions.
- Indicator Switch: Status light.
- Label Paste Site: Red label indicates a master headset, yellow label indicates a remote headset.
- External Antenna: For wireless transmission.
- USB-C Port: For charging.
- Power Switch: On/Off switch.
- 3.5mm Earphone Jack: For external earphone monitoring.
What's in the Box
The package contents vary slightly depending on the specific SkyTalk Air model purchased. Below is a general overview and a table detailing contents by model:
| Model | Headset | Battery | Charging Case | Cables | Accessories |
|---|---|---|---|---|---|
| SkyTalk Air | 1 | 1 | N/A | 1-to-3 Charging Cord (1), USB-C to USB-C (1) | Over-Ear Foam Cushion (1), On-Ear Foam Cushion (1), Battery Cushion (1), Microphone Cushion (1), Storage Bag (1), Instruction Manual (1), Number Sticker (1) |
| SkyTalk Air 3S | 3 | 3 | 1 | 1-to-3 Charging Cord (1), USB-C to USB-C (1) | Over-Ear Foam Cushion (3), On-Ear Foam Cushion (3), Battery Cushion (3), Microphone Cushion (3), Storage Bag (1), Instruction Manual (1), Number Sticker (3) |
| SkyTalk Air 4S | 4 | 4 | 1 | 1-to-3 Charging Cord (1), USB-C to USB-C (1) | Over-Ear Foam Cushion (4), On-Ear Foam Cushion (4), Battery Cushion (4), Microphone Cushion (4), Storage Bag (1), Instruction Manual (1), Number Sticker (4) |
| SkyTalk Air 5S | 5 | 5 | 1 | 1-to-3 Charging Cord (1), USB-C to USB-C (1) | Over-Ear Foam Cushion (5), On-Ear Foam Cushion (5), Battery Cushion (5), Microphone Cushion (5), Storage Bag (1), Instruction Manual (1), Number Sticker (5) |
Note: Due to continuous updates and upgrades, actual product contents may vary slightly from the pictures.
Setup
Battery Installation and Disassembly
The SkyTalk Air system uses detachable lithium batteries. Follow these steps to install or remove them:
- Slide down the battery compartment switch and open the cover.
- Insert the battery into the battery compartment with the contacts facing inwards.
- Close the cover.
- To disassemble, slide up the battery compartment switch and open the cover, then you can take out the battery.
Pairing
The headsets are factory-paired and ready to use out-of-the-box. Pairing is only required when connecting a new headset to an existing system. Ensure all master and system headsets are powered on and connected before starting the pairing process.
- Set Master/Remote Headsets: Designate one headset as the master headset. The remaining 1 to 4 headsets will function as remote headsets.
- Initiate Pairing: Press and hold the pairing buttons of all headsets for 5 seconds. A voice announcement "to be connected" will confirm successful connection. After pairing, a short press of the pairing button on any headset will announce whether it is a master or remote headset.
- Reboot: Reboot all headsets for them to be ready for use.
Note: One master headset can connect to a maximum of four remote headsets.
Operating Instructions
Microphone Status and Charging Indicators
- Flash green slowly: Unpaired
- Constant on green: Paired
- Flash green rapidly: Pairing in progress
- Breathe red: Low battery level
- Flash red and green quickly and alternately: Searching headset within group
- Constant on red: Microphone off
- Flash blue slowly (power off status): Charging
- Constant on blue for 5min then light off (power off status): Fully charged
- Power on and insert charging cord: Indicator flashes blue slowly for 5s then enters working status.
Charging Case Indicators
The charging case has eight indicators, one for each charging slot. When a lithium battery is inserted into a slot and the case is powered on, the corresponding indicator lights up. The indicator turns off when the battery is removed.
- Green flashing: Charging in progress
- Green constant: Fully charged
- Red fast flash for 10s: Low temperature protection
When the charging case is powered off, you can press the battery level testing button to display the battery levels:
- Constant on red: Battery level 0%~40%
- Constant on yellow: Battery level 40%~80%
- Constant on green: Battery level 80%~100%
Searching for Headsets
To quickly identify headsets within the same group, quickly press the pairing button twice. The indicators of all headsets will flash red and green alternately for 15 seconds.
Microphone On/Off
The microphone can be worn on either the left or right side and adjusted up and down by 270 degrees. Lowering the microphone rod enables monitoring and sound pickup, accompanied by a "Microphone on" voice announcement. Lifting the microphone rod up to a 90-degree angle enables monitoring only, with sound pickup unavailable, and a "Microphone off" voice announcement.
Mute Mode / PTT Mode (Microphone On Status)
- Press and hold: Activates PTT (Push-To-Talk) mode.
- Release: Mutes the microphone.
- Press once: Resumes to duplex intercom mode.
Volume Adjustment
- Rotate up: Increases volume.
- Rotate down: Decreases volume.
Monitoring through External Earphone
The 3.5mm earphone jack allows connection to an external earphone for monitoring the intercom audio.
Product Demonstration Video
Maintenance
- Keep the device dry and clean. Avoid exposure to rain, moisture, or dusty environments.
- Clean the headset and microphone with a soft, dry cloth. Do not use harsh chemicals or solvents.
- The ear cushions are detachable for easy cleaning or replacement.
- Store the system in its provided storage bag or case when not in use to protect it from damage.
- Avoid extreme temperatures. Do not expose the device to direct sunlight or store it in very hot or cold conditions.
Troubleshooting
- No Connection/Pairing Issues: Ensure all headsets are powered on and connected before attempting to pair. Follow the pairing steps carefully, holding the pairing button for 5 seconds. Remember that one master headset can connect to a maximum of four remote headsets.
- Audio Quality Issues: Check that the microphone is positioned correctly. The built-in Environmental Noise Cancellation (ENC) helps block ambient noise, but extreme noise levels may still affect clarity. Ensure a stable connection within the 500m transmission range, utilizing the dual-antenna design.
- Battery Life Concerns: Ensure batteries are fully charged using the provided charging case. The system is designed for approximately 20 hours of continuous use. If battery life is significantly shorter, check battery health or consider replacing them.
- Headset Not Responding: Try turning the headset off and on again. If the issue persists, check the battery level and recharge if necessary.
Specifications
| Feature | Headset (SkyTalk Air) | Charging Case (STA-CH08) |
|---|---|---|
| Wireless Band | 2.4GHz | N/A |
| Max. Transmission Distance | 500m | N/A |
| Frequency Response | 150Hz-7KHz | N/A |
| Signal to Noise Ratio | > 71dB @94dBSPL, 1KHz | N/A |
| Max SPL | > 115dBSPL | N/A |
| Lithium Battery Parameters | DC3.8V, 760mAh, 2.888Wh | N/A |
| USB-C Input | 5V → 0.6A | 5V → 2A, 9V → 2A |
| USB-C Output | N/A | 4.35V → 0.2A |
| Charging Time (USB-C Charging) | Approx. 2h | N/A |
| Battery Life | Approx. 20h | N/A |
| Adjustable Head Circumference Range | Approx. 54-58cm | N/A |
| Working Environment Temperature | 0°C~40°C | 0°C~40°C |
| Net Weight (With Battery) | Approx. 207g | Approx. 156g |
Specifications and data may be subject to changes without notice.
User Tips
- The SkyTalk Air system supports 2 to 5 users (one master and up to four remote headsets). If your team requires more than 5 users, consider using multiple independent systems or consult Godox support for advanced solutions.
- The headsets are lightweight (207g) and designed for comfort during long periods of use. The soft, detachable full-leather ear cushions are skin-friendly and pressure-free, making them ideal for extended shoots.
- Utilize the flexible mute options: lift the microphone rod for lever mute or press the button for button mute, allowing for intuitive control in any shooting scenario.
- The rechargeable storage case helps eliminate battery anxiety during long shooting days by providing a convenient way to charge multiple batteries.
Warranty and Support
The warranty period for Godox products and accessories is calculated from the purchase date. Please retain your warranty card as proof of purchase.
| Product Type | Item Name | Warranty Period (Months) | Warranty Service Type |
|---|---|---|---|
| Headset | Product Main Body | 12 | Customer sends the product to designated site |
| Battery | 3 | ||
| Parts | Charger, Electrical Parts etc. | 12 | Customer sends the product to designated site |
| Other Items | Power Cable, Sync Cable, Battery Case, Windscreen Foam, Wind Cap, Locking Device, Lanyard, Tie, Velcro Tape, Clip, Bag, Package etc. | No | Without warranty |
Inapplicable Cases for Warranty
The guarantee and service offered by this document are not applicable in the following cases:
- The product or accessory has exceeded its warranty period.
- Breakage or damage caused by inappropriate usage, maintenance, or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to improper temperature, solvent, acid, base, flooding, and damp environments, etc.
- Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alteration, addition, and detachment.
- The original identifying information of the product or accessory is modified, altered, or removed.
- No valid warranty card.
- Breakage or damage caused by using illegally authorized, non-standard, or non-publicly released software.
- Breakage or damage caused by force majeure or accident.
- Breakage or damage that could not be attributed to the product itself.
In such cases, Godox assumes no responsibility. Normal discoloration, abrasion, and consumption are not considered breakage within the maintenance scope.
How to Get Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service. When applying for maintenance service, you should provide a valid warranty card. If you cannot provide a valid warranty card, service may still be offered if the product is confirmed to be within the maintenance scope, but this is not an obligation.
Godox After-sale Service Call: 0755-29609320-8062
Declaration of Conformity
GODOX Photo Equipment Co., Ltd. hereby declares that this equipment complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states. For more information of DoC, please visit: https://www.godox.com/eu-declaration-of-conformity/
The device complies with RF specifications when used at 0mm from your body.