Dream HEPA Filter for V11 SE V12 V12pro

Contents

Dream HEPA Filter Replacement Part User Manual

For V11 SE, V12, V12pro Handheld Vacuum Cleaners

Introduction

This manual provides essential information for the safe and effective use, installation, and maintenance of your Dream HEPA Filter Replacement Part. Please read this manual thoroughly before installing or using the filter to ensure optimal performance and longevity of your vacuum cleaner.

Important Safety Instructions

  • Not suitable for children under the age of 3: This warning is based on the risk of small part entrapment. Vacuum cleaner components, including filters, may be small enough to pose a choking hazard if ingested by young children.
  • Always ensure the vacuum cleaner is powered off and unplugged from its charging base before attempting any filter replacement or maintenance.
  • Handle the filter with care to avoid damage to the delicate filter media.

Product Overview

The Dream HEPA Filter is designed to capture fine dust particles and allergens, ensuring cleaner air output from your compatible Dream handheld vacuum cleaner.

Package Contents

  • 1 or 2 x Dream HEPA Filter (depending on your purchase)

Filter Components

The filter consists of a cylindrical pleated HEPA media encased in a durable plastic frame, with a foam seal to ensure a tight fit within your vacuum cleaner.

Dream HEPA Filter top view with drying instructions

Image 1: Top view of the Dream HEPA Filter, showing the central opening and the instruction to 'Dry completely in the sun for 24H after washing'.

Dream HEPA Filter top view with brand logo

Image 2: Top view of the Dream HEPA Filter, clearly displaying the 'dreame' brand logo.

Dream HEPA Filter side view showing pleated media

Image 3: Side view of the Dream HEPA Filter, illustrating the pleated filter media and the black plastic housing.

Dream HEPA Filter in its retail packaging

Image 4: The Dream HEPA Filter shown within its retail packaging, indicating it is a filter set.

Installation and Replacement

This section outlines the general procedure for replacing consumable components like filters. Always refer to your specific vacuum cleaner's user manual for detailed instructions.

Key Steps:

  1. Power Off: Before performing any operation, make sure the vacuum cleaner has been turned off and removed from the charging base, or the power has been disconnected.
  2. Locate the Filter: Consult your vacuum cleaner's manual to find the filter compartment. This is typically located near the dust bin.
  3. Remove Old Filter: Gently twist or pull the old filter out. Dispose of the old filter responsibly.
  4. Install New Filter: Insert the new Dream HEPA Filter into the compartment. Ensure it clicks into place or is securely seated, forming a tight seal. These filters are usually designed as snap-on or knob-type, requiring no tools or only simple tools.
  5. Check the Effect: After installation, start the vacuum cleaner to run for a short period in a safe and open area. Observe whether the new components are working properly, if there are any abnormal sounds or jams.

Operating Instructions

Once the new HEPA filter is correctly installed, your vacuum cleaner is ready for use. The filter operates passively, cleaning the air as it passes through the vacuum's motor. Ensure the filter is always clean and dry for optimal vacuum performance.

Maintenance

Cleaning and Care

  • Regular Tapping: Periodically tap the filter against a hard surface (e.g., a trash can) to dislodge accumulated dust and debris.
  • Washing (if applicable): If the filter becomes heavily soiled, it can be washed under running water. Ensure no detergent or harsh chemicals are used.
  • Drying: After washing, it is crucial to dry completely in the sun for 24 hours before re-installing it into the vacuum cleaner. Re-installing a damp filter can lead to mold growth and damage to your vacuum.
  • Replacement: For optimal performance and air quality, it is recommended to replace the HEPA filter every 3-6 months, depending on usage frequency and environment.

Troubleshooting

  • Reduced Suction Power: Check if the filter is clogged with dust. Clean or replace the filter as necessary. Ensure the filter is correctly seated and sealed.
  • Vacuum Not Operating After Filter Change: Double-check that the filter is fully inserted and the dust bin is properly closed. Some vacuums have safety mechanisms that prevent operation if components are not correctly assembled.
  • Unusual Noises: If you hear new or unusual noises after changing the filter, power off the vacuum immediately. Re-check the filter installation to ensure it is seated correctly and not obstructing any moving parts.

Specifications

MaterialPlastic
Part TypeVacuum Cleaner Parts
OriginMainland China
High-concerned chemicalNone
CompatibilityDream V11 SE, V12, V12pro Handheld Vacuum Cleaners
Package Length25 cm
Package Width25 cm
Package Height20 cm
Package Weight0.15 kg

User Tips

  • Regular Inspection: Make it a habit to check your filter for visible debris or clogging every few uses.
  • Thorough Drying: Always ensure the filter is completely dry after washing. This prevents mold growth and protects your vacuum's motor.
  • Timely Replacement: Replace your HEPA filter as recommended (every 3-6 months) to maintain peak suction power and ensure effective air filtration.

Regulatory Compliance

Safety Mark: CE

The CE mark indicates that this product complies with the basic health and safety requirements of the relevant EU directives and is legally eligible for sale in the EU market.

Applicable EU Directives:

  • Low Voltage Directive (LVD) 2014/35/EU: Ensures electrical safety.
  • Electromagnetic Compatibility Directive (EMC) 2014/30/EU: Ensures the device does not cause or is affected by electromagnetic interference.
  • RoHS Directive 2011/65/EU: Restricts the use of certain hazardous substances in electrical and electronic equipment.

Key Harmonized Standards:

  • Electrical Safety: EN 60335-1:2012 + A11:2014 + A13:2017 + A15:2021, EN 60335-2-2:2010 + A1:2019 + A11:2020
  • Electromagnetic Compatibility (EMC): EN IEC 55014-1:2021, EN IEC 55014-2:2021, EN IEC 61000-3-2:2019 + A1:2021, EN 61000-3-3:2013 + A1:2019

Customer Support

For further assistance, troubleshooting issues not covered in this manual, or warranty inquiries, please contact the seller or manufacturer directly. Please have your purchase details ready when contacting support.

A detailed user manual in PDF format may also be available for download from the product page or by contacting customer support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.