1. Product Overview
The ipega PG-9186 Python Charger is designed to seamlessly integrate with your original Nintendo Switch or Switch OLED Dock. It provides a convenient and organized way to charge up to four Joy-Con controllers simultaneously, drawing power directly from the Switch Dock's USB port.

Figure 1: ipega PG-9186 Charger with Nintendo Switch Dock and Joy-Cons
Video 1: Product demonstration of the ipega PG-9186 charger.
2. Setup Instructions
Follow these steps to set up your ipega PG-9186 charger:
- Prepare the Charger: Locate the double-sided adhesive tape on the back of the charger. Carefully remove the protective film from this adhesive.
- Connect to Switch Dock: Insert the USB 2.0 male plug of the charger into an available USB port on your original Nintendo Switch Dock. Ensure it is firmly seated.
- Secure the Charger: Once connected, press the charger firmly against the side of the Nintendo Switch Dock to ensure the adhesive tape secures it in place. This provides a stable and integrated charging station.
- Initial Power On: After successful connection, all four charging slot indicators (A, B, C, D) will illuminate blue, indicating the charger is powered on and in standby mode.

Figure 2: Location of double-sided adhesive tape for secure attachment.

Figure 3: Connecting the charger to the Nintendo Switch Dock for power input.
3. Operating Instructions
Using your ipega PG-9186 charger is straightforward:
- Charging Joy-Cons: Insert one to four Nintendo Switch Joy-Con controllers into any of the available charging slots (A, B, C, or D).
- Charging Status: When a Joy-Con is correctly inserted and charging, the corresponding indicator light for that slot will turn red.
- Fully Charged: Once a Joy-Con is fully charged, its corresponding indicator light will change from red back to blue, signifying it's ready for use or in standby.
- Extended USB Port: The charger features an extended USB 2.0 female socket. This port supports DC 5V power output and communication functions, allowing you to connect other low-power USB devices or accessories.

Figure 4: Charging Indicator Status: Red for Charging, Blue for Fully Charged/Standby.
4. Maintenance
To ensure the longevity and optimal performance of your charging dock:
- Keep the charger clean by wiping it with a soft, dry cloth.
- Avoid exposing the charger to water, moisture, or extreme temperatures.
- Do not attempt to disassemble or repair the unit yourself. Contact support if issues arise.
- Ensure Joy-Cons are inserted gently to prevent damage to the charging ports.
5. Troubleshooting
If you encounter any issues, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No indicator lights when connected. | Charger not properly connected to Switch Dock; Switch Dock not powered. | Ensure the charger's USB plug is fully inserted into the Switch Dock. Verify the Switch Dock is powered and functioning. Try a different USB port on the dock if available. |
| Joy-Con not charging (light remains blue or off). | Joy-Con not properly inserted; Joy-Con already fully charged; Faulty Joy-Con. | Re-insert the Joy-Con firmly into the slot. Check if the Joy-Con is already fully charged (blue light). Try charging a different Joy-Con to isolate the issue. |
| Extended USB port not working. | Device connected requires too much power; Device not compatible. | Ensure the connected device is low-power. Try connecting a different USB device to confirm port functionality. |
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | PG-9186 |
| Input Voltage/Current | DC 5V / 1.0A |
| Charging Slots | 4 (for Nintendo Switch Joy-Cons) |
| Charging Time | Approximately 3 hours per Joy-Con |
| Extended Port | USB 2.0 Female (DC 5V output, communication support) |
| Compatibility | Nintendo Switch, Nintendo Switch OLED Dock |
7. User Tips
- For best results, ensure your Nintendo Switch Dock is placed on a stable, flat surface before attaching the charger.
- Always insert Joy-Cons with the correct orientation to avoid damaging the charging pins.
- The extended USB port is ideal for charging small accessories like wireless headphone dongles or connecting a USB drive for data transfer (if supported by the Switch).
8. Warranty and Support
This product is covered by a standard manufacturer's warranty. For warranty claims, technical support, or service inquiries, please refer to the seller or manufacturer's official website for contact information. Please retain your proof of purchase for warranty validation.