ipega PG-9187

Contents

ipega PG-9187 Charging Dock User Manual

For Nintendo Switch Joy-Con and Pro Controllers

1. Product Overview

The ipega PG-9187 is a multi-functional charging dock designed for Nintendo Switch Joy-Con controllers and Pro Controllers. It allows simultaneous charging of up to four Joy-Cons and two Pro Controllers, integrating seamlessly with the original Nintendo Switch Dock.

ipega PG-9187 Charging Dock with controllers
Figure 1: ipega PG-9187 Charging Dock with various controllers attached.

This charging dock features convenient USB connectivity, extended USB 2.0 ports for data communication, and dedicated slots for Joy-Con wrist strap storage. Its compact design and clear LED indicators make it an essential accessory for Nintendo Switch users.

Package Contents:

  • Charging Dock (PG-9187) x 1
  • User Manual x 1

2. Setup Instructions

  1. Connect to Nintendo Switch Dock: Locate the two USB male plugs on the ipega PG-9187 charging dock.
  2. Carefully insert these two USB male plugs into the corresponding USB ports on the front or side of your original Nintendo Switch Dock. Ensure a secure connection.
  3. USB male plugs for power input
    Figure 2: The two USB male plugs that connect to the Nintendo Switch Dock.
  4. Power On: Once connected, the ipega PG-9187 charging dock will draw power from the Nintendo Switch Dock. The 'ipega' logo icon on the dock will illuminate in white, and the gamepad indicator icons will show green, indicating it is ready for use.
  5. Charging mode 1 setup diagram
    Figure 3: Diagram showing the charging dock connected to the Nintendo Switch base for power.

3. Operating Instructions

Charging Controllers:

  1. Insert Controllers: Gently slide your Joy-Con controllers into the designated Joy-Con charging slots (up to four) or place your Pro Controllers onto the Pro Controller charging slots (up to two).
  2. Monitor Charging Status: When a controller is correctly inserted, its corresponding indicator icon on the dock will turn red, signifying that it is charging.
  3. Charging Complete: Once the controller is fully charged, its indicator icon will change from red to green.
Charging status indicator lights
Figure 4: Indicator lights show red for charging and green for complete charging.

USB 2.0 Extension:

The charging dock extends two USB 2.0 female ports from the Nintendo Switch Dock. These ports can be used for data communication with other USB devices.

Joy-Con Wrist Strap Storage:

The dock includes two dedicated slots for storing Joy-Con wrist straps, helping to keep your gaming area tidy.

Product Demonstration Video:

Video 1: A visual demonstration of the ipega PG-9187 charging dock's features and operation.

4. Maintenance and Care

  • Storage: Do not store this product in wet, humid, or high-temperature environments.
  • Physical Damage: Avoid striking, dropping, piercing, or attempting to disassemble the product, as this can cause irreparable damage.
  • Cleaning: Use a soft, dry cloth to clean the surface of the charging dock. Do not use harsh chemicals or abrasive materials.
  • Disassembly: Do not attempt to disassemble or modify the product. Unauthorized disassembly will void any warranty.

5. Troubleshooting

If you encounter any issues with the ipega PG-9187 charging dock, please try the following:

  • No Power/Indicators Off: Ensure the charging dock is securely connected to the Nintendo Switch Dock. Verify that the Nintendo Switch Dock itself is powered on.
  • Controllers Not Charging: Ensure controllers are correctly seated in their respective slots. Check for any debris in the charging ports of both the dock and the controllers.
  • Intermittent Charging: Re-seat the controllers and check all connections.

If problems persist after attempting these steps, please refer to the support section for further assistance.

6. Specifications

FeatureSpecification
Model NumberPG-9187
Input Voltage/CurrentDC5V/2.0A
Joy-Con Charging TimeApproximately 3 hours
Pro Controller Charging TimeApproximately 4.5 hours
Product Dimensions (L x W x H)19 cm x 7 cm x 3 cm
Product Weight0.088 kg
CompatibilityNintendo Switch Joy-Con, Nintendo Switch Pro Controller

7. Warranty and Support

Warranty Information:

This product is covered by a limited warranty. Please retain your proof of purchase for warranty claims. Unauthorized disassembly or modification of the product will void the warranty.

For specific warranty terms and duration, please refer to the retailer where the product was purchased or contact ipega customer support.

Additional Resources:

A PDF version of this user manual may be available for download. Please check the official ipega website or the product listing for the latest documentation.

You can view the original PDF manual here.

Customer Support:

For technical assistance, troubleshooting, or warranty inquiries, please contact ipega customer support through their official website or the contact information provided by your retailer.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.