Dfiolk MR16 COB

Contents

MR16 LED COB Spotlight Bulb Instruction Manual

Model: MR16 COB (RS-001) | Brand: Dfiolk

Version: Instruction Manual | Last Updated: 6/02/2026

1. Product Overview

The Dfiolk MR16 LED COB Spotlight Bulb is designed for various lighting applications, offering energy-efficient and high-brightness illumination. Available in 6W, 9W, and 12W options, these bulbs provide different color temperatures including Warm White, Pure White (4000K), and Cool White, suitable for diverse environments.

MR16 LED COB Spotlight bulb, front view
Figure 1: Front view of the MR16 LED COB Spotlight Bulb.
Three MR16 bulbs from top-down angle
Figure 2: Multiple MR16 bulbs showing their compact design.

2. Safety & Warnings

Important Safety Information:

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.
  • Handle with care to avoid cuts or injuries.

3. Setup & Installation

Before first use, ensure all protective films are removed from the device.

  1. Ensure the power supply is turned off at the main switch before installation.
  2. Insert the MR16 pins into the compatible MR16 socket.
  3. Ensure the bulb is securely seated in the fixture.
  4. Restore power to the circuit.

Important Note on Dimmable LEDs:

  • If you have purchased dimmable LEDs, a dimmer is required for dimming functionality.
  • 110V/220V dimmable bulbs can be used with conventional dimmers.
  • 12V dimmable LEDs require a low-voltage dimmer for proper operation.
Back view of three MR16 bulbs, showing the pins
Figure 3: Rear view of MR16 bulbs, highlighting the pin connector.

4. Operation

Once installed, the MR16 LED COB Spotlight Bulb operates like any standard light bulb. Simply use your wall switch or dimmer (if applicable) to turn the light on or off.

Application Areas:

These bulbs are suitable for various partial lighting applications, including:

  • Hotels
  • Dining rooms
  • Meeting rooms
  • Drawing rooms
  • Showrooms
  • Shops
  • Corridors
  • Telephone booths
  • Studios
  • Exhibition spaces
  • Living rooms
Examples of bulb application in various rooms
Figure 4: Examples of MR16 bulb applications in home and commercial settings.

5. Maintenance & Storage

Maintenance:

  • Always turn off the power before cleaning.
  • Use a soft, lint-free cloth to clean the bulb. Do not use abrasive cleaners or solvents.

Storage:

  • Store the bulbs in a dry place at room temperature (15°C - 35°C).
  • If not used for a long time, it is recommended to light up the product every three months to maintain optimal performance.

6. Troubleshooting & Stop-Use Conditions

Troubleshooting:

If the product does not function as expected, stop using it and check the following:

  • Correct installation or setup.
  • Power supply status (ensure it matches the bulb's voltage requirements).
  • Compatibility of accessories (e.g., dimmer type for dimmable bulbs).

Stop-Use Conditions:

Immediately stop using the product if you notice any of the following abnormal conditions:

  • Abnormal heat
  • Unusual smell
  • Smoke
  • Leakage
  • Deformation
  • Any other unusual noise or behavior

7. Technical Specifications

FeatureDetails
Brand NameDfiolk
Model NumberMR16 COB (RS-001)
Item TypeLED bulbs (Spotlight Bulb)
Base TypeMR16
Power SourceAC
VoltageAC 12V, 110V, 220V (General range: 85-265V)
Wattage6W, 9W, 12W
Luminous Flux249-2000 Lumens (typically 500-999 Lumens)
Color TemperatureWarm White (2700-3500K), Pure White (4000-4500K), Cool White (6000-6500K)
Beam Angle120°
Average Life (hrs)20000
LED Chip BrandCree
LED Chip Model3w high power
MaterialHigh quality aviation aluminum
Length (approx.)6W: 59mm, 9W: 62mm, 12W: 82mm (Diameter: 48mm for all)
Power Tolerance3%
Is Smart DeviceNo
Recommended Area5-8㎡
CertificationsCCC, CE, ROHS
OriginMainland China
Package Weight0.3 kg (for 5 pieces)
Package Dimensions27cm (L) x 10cm (W) x 6cm (H)
Dimensions and color temperature examples
Figure 5: Bulb dimensions for 6W, 9W, and 12W models, and visual representation of color temperatures.
Diagram showing components: Lamp body, Driver, Face mask, Chip
Figure 6: Internal components of the MR16 LED COB Spotlight Bulb.

8. Compliance Information

This product complies with the following directives for electrical or electronic products:

  • Low Voltage Directive (LVD) 2014/35/EU
  • Electromagnetic Compatibility Directive (EMC) 2014/30/EU
  • Restriction of the Use of Certain Hazardous Substances (RoHS) Directive 2011/65/EU

The product bears the CE mark, indicating conformity with European safety, health, and environmental protection requirements.

9. Disposal & Recycling

Do not dispose of the product with general household waste. Special disposal rules apply for electrical and electronic products.

Always follow local environmental and waste disposal regulations for proper recycling and disposal of this product.

10. User Tips

  • For optimal light distribution, ensure the spotlight is aimed correctly for the desired area.
  • Consider the color temperature (Warm White, Pure White, Cool White) when choosing bulbs for different rooms to create the desired ambiance.
  • If experiencing flickering or inconsistent light, double-check the bulb's connection and the power supply voltage.
  • For dimmable versions, ensure your dimmer switch is compatible with LED technology, especially for 12V models which require low-voltage dimmers.

11. Additional Resources

A detailed user manual in PDF format is available for download. This document provides further in-depth information regarding the product.

You can view the user manual (PDF) here.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.