1. Introduction
Thank you for choosing the CENGCEN Cordless Cat Water Fountain. This innovative pet drinking fountain provides fresh, filtered water for your cats with the convenience of a cordless design. Its motion-activated sensor mode and long-lasting battery ensure your pets stay hydrated with minimal effort. Please read this manual carefully before use to ensure proper operation and maintenance.

2. Package Contents
Please check the package to ensure all components are present:
- CENGCEN Cordless Cat Water Fountain Unit
- Water Spout (curved)
- Splash Ring (for bubble sound effect)
- Filter Cartridges (2 included)
- 12V Battery (pre-installed)
- Charging Cable
- User Manual
3. Setup Instructions
Follow these steps to set up your new cat water fountain:
- Unpack: Carefully remove all components from the packaging.
- Clean: Wash the water reservoir, water tray, and spout with mild soap and water. Rinse thoroughly to remove any soap residue. Do NOT wash the main pump unit or battery compartment.
- Install Filters: Place the two filter cartridges into their designated slots in the pump unit. Ensure they are seated correctly.
- Assemble Spout: Attach the curved water spout to the pump unit. If you prefer a bubble sound effect, you can swap in the splash ring. To switch back to quiet operation, remove the splash ring and re-attach the curved spout.
- Fill Water Reservoir: Fill the water reservoir with fresh water up to the 'MAX' line. Do not overfill. The fountain has a capacity of 108oz (3.2L).
- Place Fountain: Position the assembled fountain in your desired location. Thanks to its cordless design, you have true placement freedom without needing to be near an outlet.

4. Operating the Fountain
The fountain features a one-touch control and a precise power display for easy operation.

4.1 Powering On/Off
- Press the power button once to turn the fountain on or off.
4.2 Operating Modes
The fountain offers two operating modes: Sensor Mode (battery-powered) and Continuous Flow Mode (wired).

- Sensor Mode (Wireless): When operating on battery, the fountain will detect cats within 6 feet and activate for 30 seconds, then automatically turn off. This mode saves energy (up to 95%) and encourages pets to drink.
- Continuous Flow Mode (Wired): To enable continuous water flow, double-tap the power button. This mode is ideal for uninterrupted use and allows the fountain to charge while operating.

4.3 Charging the Battery
The fountain is equipped with a 5000mAh battery, providing up to 30 days of runtime on a 5-hour charge. The precise battery percentage is displayed on the control panel. Connect the charging cable to the fountain and a suitable power adapter (not included) to charge. The fountain can operate safely while charging in continuous flow mode.

5. Maintenance
Regular cleaning and filter replacement are crucial for the longevity of your fountain and the health of your pets.
5.1 Cleaning
- Daily: Check water level and refill as needed.
- Weekly: Disassemble the fountain (reservoir, tray, spout). Wash all parts (except the main pump unit and battery compartment) with mild soap and water. Rinse thoroughly.
- Monthly: Clean the pump according to the manufacturer's instructions (refer to the pump's specific manual if provided separately). This usually involves disassembling the pump and cleaning the impeller.
5.2 Filter Replacement
The fountain uses dual filters which last approximately 4-5 weeks, twice as long as single-filter fountains.
- Replace the filter cartridges every 4-5 weeks, or more frequently if you have multiple pets or notice reduced water flow/quality.
- Authentic replacement filters can be found by searching for "B0DBZG6V4Z".
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fountain not dispensing water | Low water level Clogged filter Pump malfunction Low battery | Refill water reservoir Replace filter Clean pump impeller Charge battery |
| Water flow is weak | Clogged filter Dirty pump Low water level | Replace filter Clean pump and impeller Refill water reservoir |
| Fountain is noisy | Low water level Dirty pump/impeller Improper assembly | Refill water reservoir Clean pump and impeller Reassemble fountain ensuring all parts are secure |
| Sensor mode not working | Obstruction in sensor path Low battery Fountain in continuous flow mode | Ensure clear path for sensor Charge battery Switch to sensor mode (single-tap power button) |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | WF230D2F |
| Manufacturer | CENGCEN |
| Capacity | 108 oz (3.2 Liters) |
| Material | Stainless steel |
| Battery | 1 x 12V (5000mAh), included |
| Battery Life | Up to 30 days per 5-hour charge (in Sensor Mode) |
| Operating Modes | Sensor Mode (motion-activated), Continuous Flow Mode (wired) |
| Max Output | 200g |
| Min Output | 50g |
| Dimensions (L x W x H) | 12.05 x 6.3 x 5.08 inches |
| Weight | 2.2 Pounds |
| Smart Device | No |
| LCD Display | No |
8. User Tips
- Encourage Drinking: Some cats may be hesitant at first. Try placing a favorite treat near the fountain or gently guiding their paw to the water. The splash ring can also attract curious cats with its bubble sound.
- Optimal Placement: Place the fountain in a quiet, easily accessible area away from food bowls to prevent food particles from contaminating the water.
- Monitor Water Level: Although the fountain has a large capacity, regularly check the water level to ensure continuous hydration for your pets.
- Filter Maintenance: While dual filters last longer, consider replacing them more frequently if you notice any discoloration or odor in the water, especially in multi-pet households.
9. Warranty and Support
The CENGCEN Cordless Cat Water Fountain comes with a 12-Month Stress-Free Warranty. This includes one free pump replacement and lifetime support. For warranty claims, technical assistance, or any questions regarding your product, please contact CENGCEN customer support through your purchase platform or the contact information provided with your product packaging.