1. Introduction
Thank you for choosing the Vehicleader 3/4" Amber LED Side Marker Lights. These compact, high-brightness LED lights are designed for enhanced visibility and safety on trucks, trailers, and other vehicles. Featuring a durable, waterproof design, they provide reliable performance in various conditions.

2. Setup and Installation
Follow these steps for proper installation of your LED marker lights:
- Safety First: Ensure the power supply to the vehicle's electrical system is turned off before beginning installation to prevent electrical shock or short circuits.
- Prepare Mounting Location: Choose a suitable flat surface for mounting. Drill a 3/4-inch (approximately 19mm) hole at the desired location.
- Insert Grommet: Place the rubber grommet into the drilled hole, ensuring it sits flush and securely.
- Wire Connection: Connect the light's wires correctly. Typically, one wire is positive (+) and the other is negative (-). Connect to a 12V DC power source. Ensure connections are secure and insulated to prevent short circuits.
- Insert Light: Push the LED light firmly into the center of the rubber grommet until it snaps into place.
- Test: Once all connections are made and secured, restore power and turn on the switch to operate the lights.

3. Operating Instructions
After successful installation, simply turn on the vehicle's corresponding lighting switch to activate the amber LED marker lights. These lights are designed to function as side markers, clearance lights, or auxiliary indicators, enhancing the visibility of your vehicle to other road users.


4. Maintenance and Precautions
To ensure the longevity and optimal performance of your LED marker lights, please observe the following:
- Avoid Frequent Switching: Minimize rapid on/off cycling to prolong the service life of the LEDs.
- Do Not Disassemble: Do not attempt to disassemble the lamp unit arbitrarily, as this will void the warranty and may damage the internal components.
- Waterproof Rating: These lights are IP68 waterproof, suitable for outdoor use and exposure to rain and splashes. However, avoid prolonged submersion beyond the IP68 rating or exposure to highly corrosive environments.
- Cleaning: Clean the light lenses periodically with a soft, damp cloth to maintain maximum light output. Avoid abrasive cleaners.
5. Troubleshooting
If you encounter any issues with your LED marker lights, refer to the following common problems and solutions:
- Lamp Does Not Light Up:
- Check all wiring connections to ensure they are secure and correctly polarized (+/-).
- Verify that the bulb (LED unit) itself is not damaged.
- Confirm there is power supply to the circuit.
- Low Brightness:
- Check the input voltage to ensure it is within the specified 12V range. Low voltage can result in dim illumination.
- Inspect wiring for any corrosion or loose connections that might impede current flow.
- If the issue persists, the LED unit may need replacement.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | LG196705 |
| Brand | Vehicleader |
| Type | Functional (Side Marker/Clearance Light) |
| OEM No. | Clearance Lights |
| Material | PC (Polycarbonate) |
| Size | 3/4 inch (approx. 19mm) |
| Voltage | 12V DC |
| Waterproof Rating | IP68 |
| Light Color | Amber |
| Origin | Mainland China |
7. User Tips
No specific user tips were available for this product. For best results, ensure all electrical connections are properly sealed and protected from road debris.
8. Warranty and Support
Your Vehicleader LED Side Marker Lights come with a one-year warranty from the date of purchase. This warranty covers free repair for non-man-made damage. Please retain your proof of purchase for warranty claims.
For any technical support, warranty inquiries, or further assistance, please contact the seller directly through your purchase platform.