SONGGER PJZ-1

Contents

PJZ-1 Benchtop Beer Haze Turbidity Meter Colorimeter User Manual

Model: PJZ-1

Brand: SONGGER

1. Introduction

The PJZ-1 Beer Turbidity Meter is a benchtop optical instrument designed for the quantitative measurement of beer haze in brewery and laboratory environments. It utilizes a 90° scattered light principle with Formazine standard calibration to provide stable and repeatable turbidity results in EBC units. This instrument is ideal for routine quality control, process monitoring, and final product inspection in breweries and beverage laboratories.

PJZ-1 Beer Turbidity Meter with display showing 175.6
Figure 1: Front view of the PJZ-1 Beer Turbidity Meter, highlighting "High Accuracy" and listing models PJZ-1/PJZ-2/PSD-1/PSD-2.
PJZ-1 Beer Turbidity Meter with a beer glass
Figure 2: PJZ-1 Beer Turbidity Meter emphasizing "High Precision Beer Turbidity Testing" and "One-Button Fast Measurement".

2. Safety Information and Precautions

2.1 General Precautions

  • Use only clean and undamaged sample cells to ensure measurement accuracy.
  • Avoid measuring samples with excessive bubbles or sediment, as these may affect results.
  • Do not expose the instrument to moisture, corrosive gases, or extreme temperatures.
  • Ensure the power supply voltage matches the rated AC 220 V, 50 Hz specification.
  • Disconnect the instrument from the power source before cleaning or maintenance.

2.2 Warning Information (EU Market Reference)

WARNING!

  • This instrument operates with mains electricity. There is a risk of electric shock if used improperly.
  • Do not open the housing. Internal components are not user-serviceable.
  • Use only the specified power supply.
  • Keep out of reach of children.
  • For electronic waste disposal, follow the requirements of the WEEE Directive and local EU regulations.

Note: The above warning information is for reference only. Final warning language must comply with the official language and regulatory requirements of the destination EU country.

3. Product Overview

3.1 Package Contents

Upon unpacking, please verify that all the following items are included:

  • Turbidity meter main unit
  • Sample cell
  • Power cable
  • User documentation (this manual)

3.2 Key Features

  • Benchtop optical instrument for beer haze measurement.
  • Utilizes 90° scattered light principle.
  • Formazine standard calibration for accurate results.
  • Digital LCD display for clear readings.
  • Suitable for routine quality control and process monitoring in breweries and labs.

4. Specifications

Feature Specification
Measurement Type Beer turbidity
Measurement Range 0-50 EBC
Minimum Reading 0.1 EBC
Resolution ≤2%
Optical Principle 90° scattered light method
Calibration Standard Formazine standard solution
Display Digital LCD
Power Supply AC 220 V, 50 Hz
Operating Mode Benchtop laboratory use
DIY Supplies Electrical
Battery Included No
High-concerned chemical None
Origin Mainland China
PSD-1 Beer Colorimeter specifications
Figure 3: Specifications for the PSD-1 Beer Colorimeter, including power, range, resolution, and display resolution.
  • Model: PSD-1 Beer Colorimeter
  • Power: 220V 50Hz
  • Range: 0-20 EBC
  • Resolution: ≤2%
  • Display Resolution: 0.01 EBC

5. Setup

  1. Placement: Place the instrument on a stable, level laboratory bench. Ensure it is away from direct sunlight and strong vibrations.
  2. Power Connection: Connect the power cable to an AC 220 V, 50 Hz power source.
  3. Power On and Warm-up: Switch on the instrument and allow it to warm up according to standard laboratory practice.
  4. Sample Cell Preparation: Ensure the sample cell is clean, dry, and free from fingerprints or scratches before use.

6. Operation

6.1 Sample Preparation and Insertion

  1. Fill the sample cell with the prepared beer sample. Avoid introducing bubbles and foam into the sample.
  2. Wipe the outside of the sample cell with a clean, lint-free cloth to remove any smudges or liquid.
  3. Carefully insert the prepared sample cell into the measurement chamber of the instrument.
  4. Close the cover of the measurement chamber.
Step-by-step guide for placing a sample
Figure 4: Visual guide for placing a sample and initiating a test.

6.2 Measurement and Data Reading

  1. Select the appropriate measurement mode according to the instrument settings.
  2. Initiate the test.
  3. Wait for the reading on the digital display to stabilize.
  4. Record the turbidity value shown in EBC units.
  5. After measurement, remove the sample cell and clean it immediately to prevent residue buildup.

7. Storage and Maintenance

  • Storage: Store the instrument in a dry, dust-free indoor environment when not in use.
  • Cleaning: Clean the exterior of the instrument with a soft, dry cloth. Do not use solvents or abrasive cleaners.
  • Calibration: Periodically check optical components and perform calibration using appropriate standard solutions according to laboratory quality procedures.
  • Extended Storage: If the instrument will not be used for an extended period, disconnect it from the power supply and cover it to prevent dust accumulation.

8. Troubleshooting

This section provides solutions to common issues you might encounter. For problems not listed here, please contact customer support.

Problem Possible Cause Solution
Instrument does not power on Power cable disconnected; no power from outlet; faulty power cable. Check power cable connection. Ensure outlet has power. Try a different power cable if available.
Inaccurate or unstable readings Dirty or damaged sample cell; bubbles/sediment in sample; instrument not warmed up; calibration needed. Clean sample cell thoroughly. Ensure sample is free of bubbles/sediment. Allow adequate warm-up time. Perform calibration as per laboratory procedures.
Display not working Power issue; internal fault. Verify power supply. If power is confirmed, contact customer support.

9. User Tips

No specific user tips were available from reviews or Q&A for this product at this time. Always refer to the detailed instructions for optimal performance.

10. Warranty and Support

For any technical assistance, warranty claims, or further inquiries, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific warranty terms and contact information.

A detailed user manual in PDF format is available for download: View User Manual (PDF)

PJZ-1 Beer Turbidity Meter with contact information
Figure 5: PJZ-1 Beer Turbidity Meter in a lab environment, showing potential contact information for support.

11. Compliance Disclaimer

This document is provided for product instruction purposes only. It does not constitute legal or regulatory advice. The seller is responsible for ensuring that the product and documentation comply with all applicable EU directives and national regulations.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.