Shunmaii RTU5024

Contents

RTU5024 GSM Gate Relay Switch User Manual

Model: RTU5024

Brand: Shunmaii

1. General Safety Warnings

Read and understand all instructions in this manual before using the product. Keep these instructions for future reference and pass them on to any subsequent user.

This product is intended for household use only. Use it only as described in this manual. Do not use the product if it is damaged in any way.

This product is intended for use by persons aged 18 years and above. It may be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge only if they have been given supervision or instruction and understand the hazards involved.

2. Product Overview

The RTU5024 is a GSM Gate Opener and Remote Switch that allows you to open/close gates, garage doors, shutters, or control other electrical appliances with a free call from your mobile phone. It uses Caller ID for identification, ignoring unknown callers, making it a secure solution for access control. It supports up to 200 authorized phone numbers and offers programmable relay close times.

RTU5024 GSM Relay Switch in use, controlled by a smartphone

Figure 2.1: RTU5024 GSM Relay Switch in operation, showing remote control via smartphone. Power consumption: 12V input, maximum 50mA / average 25mA.

3. Setup

3.1 Package Contents

  • 1 x RTU5024 GSM Gate Opener
  • 1 x GSM Antenna
  • 1 x User Manual (PDF available for full details)

3.2 Device Layout and Ports

Labeled diagram of RTU5024 ports and indicators

Figure 3.1: RTU5024 Device Layout

  1. Signal Light: Indicates GSM network status.
  2. Relay Light: Indicates relay activation status.
  3. Power Port (DC 9-15V): Connect the power supply here.
  4. Normal Open (NO): Relay output terminal.
  5. Common (COM): Relay output terminal.
  6. Normal Close (NC): Relay output terminal.

3.3 SIM Card Installation

Locate the SIM card slot on the device. Ensure the device is powered off before inserting or removing the SIM card. Insert a standard GSM SIM card into the slot until it clicks into place. Ensure the SIM card has an active plan and sufficient credit if required for SMS commands.

3.4 Antenna Connection

Screw the provided GSM antenna into the 'ANT' connector on the device. Ensure it is securely fastened for optimal signal reception.

GSM antenna with cable

Figure 3.2: GSM Antenna

3.5 Wiring

Connect your gate opener, garage door motor, or other electrical appliance to the relay output terminals (NO, COM, NC) based on your application's requirements. For most gate openers, you will use the NO (Normally Open) and COM (Common) terminals to trigger the opening mechanism. Consult your appliance's manual for specific wiring instructions.

Connect a DC 9-15V power supply to the power port (3). Ensure the power supply matches the device's requirements.

4. Operating Instructions

4.1 Power On

After connecting the SIM card, antenna, and wiring, connect the power supply. The signal light will blink, indicating it's searching for the GSM network. Once connected, it will blink slower.

4.2 Authorizing Phone Numbers

The RTU5024 operates by recognizing authorized phone numbers. To add or remove authorized numbers, you will typically send specific SMS commands to the SIM card number inserted in the device. Refer to the full user manual PDF for the exact SMS command syntax.

4.3 Remote Control (Opening/Closing)

Once your phone number is authorized, simply dial the phone number of the SIM card in the RTU5024. The device will recognize your number, reject the call (so you incur no call charges), and activate the relay. The relay light will illuminate briefly. The gate or appliance connected will then operate.

4.4 Setting Relay Activation Time

The duration for which the relay remains active (e.g., how long the gate opener signal is sent) can be programmed. This is typically done via SMS commands. The relay close time is programmable from 0 to 30 seconds. Consult the full user manual PDF for specific SMS commands.

5. Maintenance

  • Cleaning: Keep the device clean and free from dust. Use a dry, soft cloth for cleaning. Do not use liquid cleaners.
  • Connections: Periodically check all wiring connections to ensure they are secure and free from corrosion.
  • Antenna: Ensure the antenna is always securely connected and positioned for optimal signal reception.
  • SIM Card: Ensure the SIM card remains active and has sufficient credit if SMS commands are frequently used.

6. Troubleshooting

ProblemPossible CauseSolution
Device does not respond to calls.1. Phone number not authorized.
2. No GSM signal.
3. SIM card issues (inactive, no credit).
4. Incorrect wiring.
1. Authorize your phone number via SMS.
2. Check signal light; reposition antenna or device.
3. Check SIM card status and credit.
4. Verify power and relay connections.
Signal light not blinking.1. No power.
2. SIM card not inserted correctly.
1. Check power supply connection.
2. Reinsert SIM card.
Relay does not activate.1. Incorrect relay wiring.
2. Appliance issue.
1. Verify connections to NO/COM/NC terminals.
2. Test the appliance independently.

7. Specifications

FeatureSpecification
ModelRTU5024
Power InputDC 9-15V
Power Consumption12V input, Max 50mA / Average 25mA
GSM FrequencyStandard GSM bands (specific bands may vary by region)
Relay Output3A/240VAC
Authorized UsersUp to 200
Relay Close TimeProgrammable 0-30 seconds
Dimensions (L x W x H)76mm x 82mm x 27mm
RTU5024 dimensions diagram

Figure 7.1: RTU5024 Dimensions

8. User Tips

  • For optimal GSM signal, ensure the antenna is placed in an open area, away from large metal objects or walls that might obstruct the signal.
  • Always test the device's functionality with a small, safe load before connecting it to critical systems like gate openers.
  • Keep a record of all authorized phone numbers and the SIM card number for easy management.
  • If using a prepaid SIM card, monitor its balance to ensure continuous operation.

9. Warranty and Support

For detailed instructions, advanced configurations, and troubleshooting, please refer to the complete user manual PDF available at: RTU5024 User Manual PDF.

Manufacturer Information:

Manufacturer: Guangzhou Aicai Technology Co., Ltd.
Address: Room 709, No. 68, Gangwan Road Huangpu District, Guangzhou, China

European Authorized Representative (EC REP):

Company: VALHALLA TAXE
Address: RUE GENERAL DE REFFYE EGD, 88000 EPINAL, France
Tel: +33-0629986194
Email: valhallatax@outlook.com

This product complies with CE, FC, and RoHS standards.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.