MYAMi MY-K3005MS

Contents

MYAMi MY-K3005MS DC Power Supply User Manual

Adjustable Benchtop Power Supply with LED Display

1. Introduction

The MYAMi MY-K3005MS is an ultra-mini DC regulated power supply designed for precision applications. It features a tiny single-channel output with a four-digit digital display that simultaneously shows voltage, current, and power values. Equipped with an independent ON/OFF output switch and a USB fast charging port, this lightweight and compact device is an ideal tool for various testing and repair tasks.

2. Features

  • Compact Design: Small in size and lightweight (approx. 0.8kg), saving workspace and easy to carry.
  • Precise 4-bit LED Display: High-precision display for voltage (0.01V resolution) and current (0.001A resolution).
  • Independent Output Control: Dedicated ON/OFF switch for output.
  • Memory Function: Remembers preset voltage and current values after power-off.
  • USB Fast Charging: External USB Type-A port (QC18W: 5V-3A/9V-2A/12V-1.5A) for quick charging.
  • Key Lock Function: Prevents accidental adjustments during operation.
  • 5-in-One Protection: Includes Over-voltage Protection, Over-current Protection, Over-power Protection, Over-temperature Protection, and Short Circuit Protection for stable performance and extended service life.
Diagram showing 5-in-one protection functions: Over-voltage, Over-current, Over-power, Over-temperature, Short Circuit Protection.
Figure 1: Five-in-one protection functions for enhanced safety and durability.
Image showing the power supply with dimensions: 195mm (7.68in) length, 80mm (3.15in) height, and 'Only 0.8kg' text.
Figure 2: Compact dimensions and lightweight design (0.8kg) for portability.

3. Specifications

MYAMi MY-K3005MS Technical Parameters
Parameter Value
ModelMY-K3005MS (305MS)
Rated Voltage Output0-30V
Rated Current Output0-5A
AC Input Voltage115-230V±10%, 50Hz/60Hz
Nominal Working Conditions
Working Temperature0°C to 40°C
Working Relative Humidity< 80%RH
Storage Conditions
Storage Temperature-10°C to 70°C
Storage Relative Humidity< 70%RH
Constant Voltage State
Voltage Stability<1%±3mV
Load Stability<1%±3mV
Ripple Noise<50mVrms
Constant Current State
Current Stability≤1%±3mA
Load Stability≤1%±3mA
Ripple Noise≤50mArms
Display
Voltage Resolution0.01 V
Current Resolution0.001 A
Display Accuracy1%±5 digits
Product Size (W×D×H)102mm × 195mm × 80mm
Product Net WeightAbout 0.8kg
Packaging Size (W×D×H)178mm × 228mm × 115mm
Weight With PackageAbout 1.15 kg
Fuse Specifications3.15 A

4. Setup

  1. Ensure the power switch on the rear panel is in the 'OFF' (0) position.
  2. Connect the provided power cord to the AC input socket on the rear panel. Ensure the ground wire is properly connected.
  3. Connect the other end of the power cord to a suitable mains power outlet. Verify that the input voltage of the power supply matches your local mains voltage to prevent malfunction.
  4. Place the power supply in a well-ventilated area. Maintain at least a 10cm (4 inches) gap around the top, bottom, left, and right sides to ensure proper airflow. Avoid dusty, corrosive, or otherwise harmful environments.
  5. Turn the power switch on the rear panel to the 'ON' (1) position.
  6. Allow the device to warm up for approximately 15 minutes before performing any technical measurements to ensure stable operation.
Diagram of the MYAMi DC Power Supply showing front and rear panel components including output terminals, USB port, power switch, AC input, cooling fan, and fuse box.
Figure 3: Front and Rear Panel Details for connection and operation.

5. Operation

5.1. Front Panel Overview

Refer to Figure 3 for the location of the following components:

  • 1. Voltage Display Window: Shows preset voltage in standby, or output voltage during operation (V).
  • 2. Current Display Window: Shows preset current in standby, or output current during operation (A).
  • 3. Power Display Window: Shows "OFF" in standby, or power output during operation (W).
  • 4. USB Fast Charging Output Port: QC18W (5V-3A/9V-2A/12V-1.5A).
  • 5. Output ON/OFF Button: Short press to toggle output status.
  • 6. Positive (Red) Output Terminal: Connects to the positive lead of your load.
  • 7. Negative (Black) Output Terminal: Connects to the negative lead of your load.
  • 8. Keypad Lock Indicator: Yellow light indicates the knobs are locked.
  • 9. Current Adjustment Knob: Adjusts preset current. Short press to move editing position. Hold down to lock/unlock.
  • 10. CC Constant Current Indicator: Red "CC" light indicates constant current output mode.
  • 11. Voltage Adjustment Knob: Adjusts preset voltage. Short press to move editing position. Long press to save current output state.
  • 12. CV Constant Voltage Indicator: Green "CV" light indicates constant voltage output mode.

5.2. Basic Operation Steps

  1. Set Voltage/Current: Use the Voltage Adjustment Knob (11) and Current Adjustment Knob (9) to set the desired output voltage and current limits. Turn clockwise to increase, counter-clockwise to decrease. Short press the knob to move the editing position (digit).
  2. Turn On Output: Press the Output ON/OFF Button (5) to enable the power output. The display will show the actual output voltage, current, and power.
  3. Begin Work: Connect your device to the Positive (Red) (6) and Negative (Black) (7) output terminals and proceed with your task.
Diagram showing simple operation steps: 1. Set voltage/current, 2. Press ON/OFF to output, 3. Start to work.
Figure 4: Simple and easy operation steps.

5.3. Encoder Adjustment Knob

The encoder adjustment knobs for Voltage (11) and Current (9) allow precise setting of values. Press the knob to select the position of the number you wish to change, then turn the knob to set the value from 0-9. This allows for fine-tuning of output parameters.

Diagram illustrating how to use the encoder adjustment knob: press to select digit, turn to change value.
Figure 5: Detailed instructions for using the encoder adjustment knobs.

5.4. Key Lock Function

To prevent accidental changes to the set voltage and current, you can activate the key lock function. Hold down the Current Adjustment Knob (9) until the Keypad Lock Indicator (8) turns yellow. This indicates the knobs are locked. To unlock, hold down the Current Adjustment Knob (9) again until the yellow light turns off.

5.5. USB Quick Charge Interface

The front panel features a USB fast charging output port (4) with QC18W capabilities (5V-3A/9V-2A/12V-1.5A). This can be used to charge compatible devices.

Image showing a smartphone being charged via the 9V2A USB Quick Charge Interface on the power supply.
Figure 6: Using the 9V2A USB Quick Charge Interface.

5.6. Output Reliability Test Video

Video 1: Demonstrating the output reliability of the power supply using a multimeter.

6. Maintenance

  • General Care: Keep the power supply clean and free from dust. Avoid exposing it to moisture or extreme temperatures.
  • Ventilation: Ensure proper ventilation at all times. Do not block the cooling fan or vents.
  • Fuse Replacement: If the power supply does not light up after startup, the fuse may be blown. Disconnect the power cord, then replace the fuse located in the fuse box on the rear panel (refer to Figure 3). Use a 3.15A fuse. If the issue persists, consult a professional.

7. Troubleshooting

  • No Power/Display After Startup:
    • Check if the power cord is securely connected and the rear power switch is ON.
    • Verify that the input voltage matches the power supply's requirements.
    • Inspect the fuse (3.15A) on the rear panel and replace if blown.
  • Low Output Voltage in Constant Voltage (CV) Mode (CC light is ON):
    • This indicates the power supply has entered constant current protection.
    • Check the connected load for any short circuits or excessive current draw.
    • Increase the preset current limit using the Current Adjustment Knob (9) clockwise.
  • Low Output Current in Constant Current (CC) Mode (CV light is ON):
    • This indicates the power supply has entered voltage protection.
    • Check the connected load.
    • Increase the preset voltage limit using the Voltage Adjustment Knob (11) clockwise.
  • Severe Faults: If a fault cannot be resolved using the above steps, please contact your dealer or the manufacturer for assistance.

8. User Tips

  • This power supply is highly versatile and suitable for various electronic repairs, including mobile phones and laptops, as well as general lab testing.
  • Its compact size and light weight make it an excellent choice for users who need to move their equipment frequently or have limited workspace.

9. Warranty and Support

This product comes with a warranty and support as detailed below:

  • Software Upgrades: Free upgrades for software versions.
  • Quality Assurance: Free replacement and maintenance for quality problems arising from design, manufacturing, or installation processes, and materials.
  • Post-Warranty Service: After the warranty period, the system will be maintained for life, with only the material cost charged for replacing accessories.
  • Warranty Period: 12 months free warranty service (excluding accessories). Freight for warranty service is paid by the sender (for mainland customers only).
  • Exclusions: The warranty does not cover damages caused by:
    • Internal circuit damage due to harsh environments (e.g., electroplating, highly corrosive conditions).
    • Repairs or modifications performed by non-company technicians or unauthorized service stations.
    • Misoperation, negligent use, or other user-induced incidents.
    • Failure to operate or maintain the product according to the provided instructions.
    • Products discontinued for five years or more.

For further assistance or to claim warranty service, please contact your dealer or the MYAMi Official Store.

A PDF version of the user manual is available for download. Please refer to the following link for the official PDF: MYAMi MY-K3005MS User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.