Godox K180A

Contents

Godox K180A 180Ws Strobe Studio Flash Light

User Instruction Manual

Important Safety Instructions and Attentions

Please read all instructions carefully before use and keep this manual for future reference.

  • This product is professional lighting equipment and should only be used by professional lighting engineers or under their guidance.
  • Keep out of reach of children. Supervise children closely if they are near the equipment.
  • This product is not for general lighting. Avoid if you have sensitive eyes.
  • When the lamp is on, do not touch high-temperature parts (e.g., LED lamp beads) to avoid burns.
  • Do not look directly at the lamp beads when on. Avoid prolonged exposure to strong light. If eye discomfort occurs, turn off the lamp and seek medical attention.
  • If the lamp bead is damaged or deformed by heat, stop use immediately and contact qualified personnel for replacement.
  • Operate only in temperatures between -10°C and 40°C with normal humidity.
  • Do not use damaged equipment or accessories. Have them checked and repaired by professionals.
  • If the casing is broken due to drops or impacts, do not use it to avoid electric shock.
  • If an extension cord is needed, use one with a current rating equal to or greater than the equipment's rating to prevent overheating.
  • Place power cords properly to avoid contact with hot surfaces, damage, or tripping hazards. Use only certified power cords.
  • Unplug equipment from the power outlet before cleaning or repairing, and when not in use. Always pull the plug, not the cord. Connect to a grounded outlet.
  • This equipment is not waterproof. Keep it dry and do not immerse it in liquids. Install in a dry, ventilated place. Avoid rainy, humid, dusty, or overheated environments.
  • Do not place objects on the lamp or allow liquid to flow into it.
  • Do not disassemble the product without permission. Repairs must be done by authorized personnel.
  • Ensure equipment has cooled completely before storing. Unplug the power cord and store in a carrying case or ventilated dry place.
  • Do not place equipment near flammable or volatile solvents.
  • Use only accessories recommended by the manufacturer.
  • Clean with a dry or soft cloth. Do not use a damp cloth.
  • Remove the protective cover before use.
  • This product complies with ROHS, CE, and FCC certification.
  • For products with built-in lithium batteries, use specified chargers and operate within specified voltage and temperature ranges.
  • For battery-powered products, use only specified batteries, power sources, or accessories. Keep batteries out of reach of children. Seek immediate medical attention if swallowed. If a battery leaks, becomes discolored, deformed, emits smoke, or has an abnormal odor, remove it carefully to avoid burns. Do not use deformed or modified batteries. Do not disassemble, modify, heat, or solder batteries. Keep away from fire or water. Insert positive and negative ends correctly. Do not mix old and new batteries or different types.

Main Features

  • 8 FX special effects modes to simulate various shooting scenes.
  • Remote control via Bluetooth APP and 2.4G.
  • Stable light source with adjustable brightness from 0% to 100%.
  • Bowens mount for compatibility with various accessories.
  • Super high color rendering index (CRI≥96, TLCI≥97).

Product Overview and Parts

Familiarize yourself with the components of your Godox K180A Strobe Flash.

Godox K180A Control Panel with Labeled Parts

Figure 1: Godox K180A Control Panel with Labeled Parts

  1. Output Control Knob
  2. Test Button
  3. Power Switch
  4. Fuse
  5. Sync Socket
  6. Power Socket
  7. Fixed Knob 1
  8. Soft Umbrella Hole
  9. Fixed Knob 2
  10. Remote Indicator
  11. Ready Indicator
  12. Model Switch
Flash Tube and Modeling Lamp Diagram

Figure 2: Flash Tube and Modeling Lamp Diagram

  • Flash Tube: 180W flash bulb.
  • Modeling Lamp: 75W modeling lamp bulb, used for focusing in darkroom.

What's in the Box

The standard package for the Godox K180A includes:

  • 1 x GODOX K-180A Studio Strobe
  • 1 x Modeling Lamp
  • 1 x Power Cord
  • 1 x LED Bowens-mount Reflector
  • 1 x Protection Cover
  • 1 x Instruction Manual

If you purchased the RT-16 Flash Trigger bundle, it includes:

  • 1 x Godox RT-16 Transmitter
  • 1 x Godox RT-16 Receiver
  • 1 x Sync Cable
  • 1 x Convert Adaptor (Diameter 6.35MM)
  • 1 x Instruction Manual

Setup

1. Power Connection

  1. Connect the power cord to the power socket on the back of the K180A strobe.
  2. Plug the other end of the power cord into a suitable grounded electrical outlet (AC100-120V 60Hz or 200V-240V 50Hz, depending on your model).
  3. Press the Power Switch to turn the unit ON.

2. Mounting the Strobe

  1. Attach the K180A strobe to a light stand using the integrated bracket and fixing knobs.
  2. Adjust the direction of the strobe using the direction adjusting bracket and secure it with the fixing knobs.
  3. If using a softbox or umbrella, insert the umbrella shaft into the soft umbrella hole and secure it.

3. Attaching Accessories

The K180A features a Bowens mount, allowing for easy attachment of various light modifiers such as reflectors, softboxes, and snoots. Align the accessory with the Bowens mount and twist to lock it into place using the accessory locking ring.

Operating Instructions

1. LCD Panel Overview

LCD Panel Display

Figure 3: LCD Panel Display

The LCD panel displays various settings:

  • Channel (CH)
  • Group (GR)
  • Light Effects (FX)
  • ID
  • Bluetooth Indicator
  • Brightness Adjustment Ratio (0-100%)
  • CCT Value (Color Temperature)

2. Brightness Adjustment

Adjustable Brightness Knob

Figure 4: Adjustable Brightness Knob

Turn the Output Control Knob (DIM dial) to adjust brightness from 0% to 100%. Turn left to decrease brightness by 1 unit, turn right to increase by 1 unit. Quick adjustment is available.

3. FX Mode (Special Effects)

Short press the FX Button to enter or exit FX mode. When in FX mode, the FX icon will be displayed on the LCD panel. Turn the FX Select Dial to choose one of the 8 special effects modes for creative shooting:

DisplayFX1FX2FX3FX4FX5FX6FX7FX8
SceneFlash1Flash2Flash3Storm1Storm2Storm3TVBroken bulb

4. 2.4G Wireless Setting

The K180A can be controlled wirelessly using a 2.4G trigger like the Godox RT-16.

Godox RT-16 Flash Trigger and Receiver

Figure 5: Godox RT-16 Flash Trigger and Receiver

4.1 Group Setting

Short press the GR Button. The GR values will blink on the display. Turn the DIM dial to adjust groups from 0 to 9 and A to F. Short press the GR Button again to exit.

4.2 Channel Setting

Short press the CH Button. The CH values will blink on the display. Turn the DIM dial to adjust channels from 1 to 32. Short press the CH Button again to exit.

4.3 ID Setting

Long press the CH and GR buttons together until the ID values blink. Turn the DIM dial to adjust IDs from OFF and 1 to 99. Long press CH and GR buttons again to exit.

5. Bluetooth Setting

5.1 Bluetooth MAC Code Checking

Short press the Bluetooth button once to display the Bluetooth MAC code.

5.2 Bluetooth Reset

Long press the Bluetooth button until the Bluetooth icon blinks. The icon will stop blinking in 3 seconds after successful reset.

5.3 Connect to Smartphone

Scan the QR code in the manual (or search) to download the "Godox Light" smartphone APP (available for Android and Apple). For detailed APP operations, refer to the "help" section within the APP.

Maintenance

1. Cleaning

When cleaning the unit, do not wipe it with a damp cloth. Use a dry, soft cloth to wipe off dirt and dust from the equipment.

2. Storage

Before storing, ensure the equipment has cooled down completely. Unplug the power cord. Store the equipment in its carrying case or a ventilated, dry place. Avoid placing it near flammable and volatile solvents.

3. Lamp Replacement

If the lamp bead (flash tube or modeling lamp) is damaged or deformed by heat, stop using the equipment immediately. Contact the manufacturer, service agent, or qualified maintenance personnel to replace the lamp bead in time to avoid accidents. Unauthorized replacement may void your warranty.

Troubleshooting

The K180A strobe light includes indicators for common issues:

  • Lighting indicates fan failure: If the fan indicator lights up, it signals a fan malfunction.
  • Flashing indicates failure: A flashing indicator typically points to a general failure.
  • Lighting indicates high temperature alarm: If this indicator lights up, the unit is overheating.
  • Flashing indicates high temperature protection status and light automatically enters shutdown procedure: If the high temperature indicator flashes, the unit has entered protection mode and will shut down to prevent damage. Allow it to cool down before resuming use.

If you encounter issues not listed above, please:

  • Check all cable connections.
  • Ensure the power source is stable.
  • Refer to the safety instructions for proper usage.
  • Contact customer support if the problem persists.

Specifications

Illuminance Data (at 5600K, 100% Brightness)

Testing ConditionUnit1m2m3m
Bare lamplux2160552264
fc20051.324.5
With reflectorlux1860037001450
fc1720344135

Technical Data

ParameterValue
ModelSL60IID (K180A)
Power Supply100V-240V~50/60Hz 0.7A
PowerMax. 70W (180Ws Flash Output)
CCT (Color Temperature)5600±200K
Channel32
Group16 (A,B,C,D,E,F,0-9)
ID1-99/OF
CRI≥96
TLCI≥97
FX Type8
Control Method2.4GHz Wireless/Bluetooth/Light Body Control
2.4GHz Transmission Distance≈30m
Bluetooth Transmission Distance≈30m
Brightness Range0%-100%
Working Environment Temperature-10°C-40°C
Dimension (unfolded without reflector)140mm*236mm*215mm (approx. 20.3*11.8*20cm)
Net Weight≈1.43kg (approx. 1.2kg)
Modeling Lamp75WS (adjustable)
Recharging Time0.5-3s
Flash Triggering MethodSync cord, Slave, Test button, Flash trigger

Specification and design may be subject to changes without notice.

Warranty and Support

Warranty Period

The warranty period for Godox products and accessories is calculated from the purchase date. The purchase date is considered the date registered on the warranty card.

Product TypeNameMaintenance Period (months)Warranty Service Type
PartsCircuit Board12Customer sends the product to designated site
Battery3Customer sends the product to designated site
Electrical parts (e.g., battery charger)12Customer sends the product to designated site
Other ItemsFlash tube, modeling lamp, lamp body, lamp cover, locking device, package, power cord, sync cable, etc.NOWithout warranty

Inapplicable Cases (Warranty Void)

The warranty and service offered by this document are not applicable in the following cases:

  • Product or accessory has expired its warranty period.
  • Breakage or damage caused by inappropriate usage, maintenance, or preservation (e.g., improper packing, usage, plugging, falling off, squeezing, exposure to improper temperature, solvents, flooding, damp environments).
  • Breakage or damage caused by non-authorized institutions or staff during installation, maintenance, alteration, addition, or detachment.
  • Original identifying information of product or accessory is modified, altered, or removed.
  • No valid warranty card.
  • Breakage or damage caused by using illegally authorized, nonstandard, or non-public released software.
  • Breakage or damage caused by force majeure or accident.
  • Breakage or damage not attributable to the product itself.

How to Get Maintenance Service

If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call. When applying for maintenance service, you should provide a valid warranty card. If you cannot provide a valid warranty card, service may still be offered if the product is confirmed to be within the maintenance scope, but this is not an obligation.

Godox After-sale Service Call: 0755-29609320-8062

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

IC Warning

This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

User Tips

  • Utilize Wireless Control: For convenient operation and flexible lighting setups, make full use of the Godox RT-16 wireless trigger or the Godox Light smartphone app.
  • Experiment with FX Modes: Explore the 8 special effects modes to add creative flair to your photography and video projects.
  • Check Compatibility: Ensure your camera and other studio equipment are compatible with the strobe's sync methods (sync cord, slave, flash trigger).
  • Secure Mounting: Always ensure the strobe is securely mounted on a sturdy light stand to prevent accidents.

© 2024 Godox. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.