1. Introduction
Thank you for choosing the SEMBO BLOCK T1110 STEM Technical Programmable Robotic Arm. This educational building block kit is designed to provide an engaging experience in engineering, robotics, and programming. Featuring a multi-axis mechanical arm, tracked movement, and dual-mode control (remote control and APP programming), this kit offers a comprehensive learning platform for users aged 14 and above.

Key Features:
- Sci-Fi Design: An aesthetically pleasing and functional robotic arm.
- Dual-Mode Control: Operate via a dedicated 2.4G remote controller or a smartphone APP.
- Programmable: Learn programming concepts through a block-based coding interface on the APP.
- Multi-axis Linkage: Flexible and precise movements for the arm and gripper.
- Tracked Movement: The base features tracks for multi-directional mobility.
- Educational Value: Promotes STEM learning, hand-eye coordination, and engineering thinking.

2. Safety Information
Please read and understand all safety warnings before assembly and operation.
- Choking Hazard: This kit contains small parts and is not suitable for children under 3 years old. Adult supervision is recommended during assembly and play for younger users.
- Warning: NO EAT. Do not ingest any parts of the product.
- California Proposition 65 Warning: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Battery Safety: Ensure batteries are inserted with correct polarity. Do not mix old and new batteries, or different types of batteries. Remove batteries if the product will not be used for an extended period.
- Electrical Components: Handle electrical components with care. Do not expose to water or extreme temperatures.
3. Package Contents
The SEMBO BLOCK T1110 kit includes all necessary components for building and operating your robotic arm. Please verify all parts are present upon opening the box.
- Building Blocks (Self-Locking Bricks)
- Electric Motors (Type M for gripper, arm, and tracks)
- 2.4G Remote Controller
- Instruction Manual
- USB Charging Cable (if applicable for rechargeable components, not explicitly stated but common for electric toys)
Note: The product is typically packaged in a custom gift box.
4. Assembly Instructions
Follow the detailed step-by-step instructions provided in the included physical manual to assemble your robotic arm. Careful attention to detail during construction will ensure proper functionality.
- Unpack and Organize: Carefully unpack all building blocks and components. It is recommended to sort parts by type or color to facilitate assembly.
- Follow the Manual: Adhere strictly to the assembly steps outlined in the instruction booklet. Each step is crucial for the structural integrity and mechanical function of the robotic arm.
- Motor Integration: Pay close attention to the placement and connection of the Type M motors. These motors control the gripper, the arm's movements, and the tracked base. Ensure all connections are secure.

The robotic arm features a multi-gear linkage structure and multi-axis mechanical transmission, which are critical for its flexible movements. Double-check all gear alignments and connections.
5. Power Supply
The robotic arm is electric and requires batteries for operation. Specific battery types (e.g., AA, AAA, or a rechargeable battery pack) will be detailed in your physical instruction manual. Ensure batteries are correctly installed according to the polarity markings.
- Main Unit: Install batteries into the main control unit of the robotic arm as indicated in the manual.
- Remote Controller: Install batteries into the 2.4G remote controller.
- Charging: If your model includes a rechargeable battery pack, use the provided USB charging cable to charge it fully before first use.
6. Control Modes
The T1110 Robotic Arm offers two primary control methods: a physical remote controller and a smartphone application for programming.
6.1. Remote Control Mode
Use the included 2.4G remote controller for direct and responsive control of the robotic arm's movements. This mode allows for immediate manipulation of the arm, gripper, and tracks.
- Arm Movement: Control the arm's extension and retraction, as well as vertical and horizontal articulation. The arm can extend up to 90 degrees.
- Gripper Operation: Open and close the gripper to pick up and release objects.
- Tracked Movement: Drive the robotic arm's base in all directions using the tracks.

6.2. APP Programming Mode
Enhance your experience by connecting the robotic arm to a smartphone application. This mode allows for block-based programming, enabling you to create custom sequences of movements and actions.
- Download the APP: Scan the QR code in your physical manual or search for the designated app in your device's app store.
- Connect: Follow the in-app instructions to connect your smartphone to the robotic arm via Bluetooth or other wireless protocols.
- Block-Based Programming: Utilize the intuitive drag-and-drop programming interface (similar to Scratch) to design complex movements, precise grasping actions, and custom track paths.

7. Operation
Once assembled and powered, you can begin operating your robotic arm using either the remote control or the programming app.
7.1. Basic Operation (Remote Control)
- Power On: Ensure both the robotic arm and the remote control are powered on.
- Pairing: If necessary, follow the manual's instructions to pair the remote control with the robotic arm.
- Movement: Use the joysticks and buttons on the remote to control the arm's articulation, gripper, and track movement. Experiment with different combinations to understand its full range of motion.
7.2. Advanced Operation (APP Programming)
- Launch App: Open the dedicated control app on your smartphone.
- Connect: Establish a connection between the app and the robotic arm.
- Program Creation: Drag and drop programming blocks to create a sequence of commands. These can include specific arm angles, gripper actions, and track movements.
- Execute Program: Once your program is complete, execute it from the app to watch the robotic arm perform the programmed tasks.
8. Maintenance
Proper maintenance will ensure the longevity and optimal performance of your robotic arm.
- Cleaning: Wipe the robotic arm with a dry, soft cloth to remove dust and debris. Do not use water or chemical cleaners, as they may damage the electronic components or plastic.
- Storage: Store the robotic arm in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: Remove batteries from both the robotic arm and the remote control if the device will not be used for an extended period to prevent leakage and damage.
- Inspection: Periodically check for any loose connections, worn gears, or damaged parts. Replace any damaged components as necessary.
9. Troubleshooting
If you encounter issues with your robotic arm, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Robotic arm does not move. | Low or dead batteries; incorrect battery installation; loose motor connection; not powered on. | Replace batteries; ensure correct polarity; check all motor connections; ensure power switch is ON. |
| Remote control not responding. | Low or dead batteries in remote; remote not paired; interference. | Replace remote batteries; re-pair remote with robotic arm (refer to manual); move away from other 2.4G devices. |
| APP connection issues. | Bluetooth/Wi-Fi off; app not updated; robotic arm not in pairing mode. | Ensure device's wireless is on; update app to latest version; put robotic arm in pairing mode as per manual. |
| Arm/gripper movements are jerky or weak. | Low batteries; gears not properly aligned; excessive load. | Replace batteries; inspect gear assembly for proper alignment; reduce the weight of objects being lifted. |
10. Specifications
| Feature | Detail |
|---|---|
| Brand Name | SEMBO BLOCK |
| Model Number | T1110 |
| Material | ABS Plastic |
| Block Size | Small building block (Compatible with Lego) |
| Is Electric | Yes |
| Plastic Block Shape | Self-Locking Bricks |
| Certification | CE |
| Gender | Unisex |
| Recommended Age | 14+y, 18+ |
| Origin | Mainland China |
| Product Dimensions (L x W x H) | 444mm x 184mm x 320mm |
| Package Dimensions (L x W x H) | 35cm x 27cm x 14cm |
| Package Weight | 1.756 kg |
| High-concerned chemical | None |
| Warning | NO EAT |

11. User Tips
Here are some tips to enhance your experience with the robotic arm:
- Organize Parts: Before starting assembly, sort all building blocks into separate containers or bags. This will save time and prevent frustration from searching for specific pieces.
- Test Periodically: During complex assembly stages, especially when integrating motors, perform quick tests to ensure components are moving freely and correctly before proceeding.
- Start Simple with Programming: If new to block-based programming, begin with simple commands like moving the arm up and down or opening/closing the gripper. Gradually build up to more complex sequences.
- Battery Quality: Use high-quality batteries for consistent power delivery, especially for the motors, which require stable voltage for smooth operation.
- Clear Workspace: Maintain a clear and well-lit workspace during assembly and operation to prevent losing small parts and to ensure safety.
12. Warranty and Support
For any questions, technical assistance, or issues not covered in this manual, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.