ZEFIORA S10

Contents

Zefiora S10 Electric Bicycle Scooter User Manual

Model: S10 | Brand: ZEFIORA

Important Information for Users

Thank you for choosing the Zefiora S10 electric scooter. This manual provides essential information for the safe and effective use of your product. A comprehensive user manual in PDF format is also available for this product. Please read it carefully before operating the scooter for the first time.

The Zefiora S10 electric scooter features a unique shape, advanced and reliable technology, and is designed for comfortable, convenient, and environmentally friendly travel. It is built with a structure capable of withstanding 100,000 vibrations, shock absorbers, an efficient motor, and a robust driving system.

As part of our commitment to continuous improvement, the physical product may have minor differences from the illustrations in this manual. Always refer to the actual product.

Disclaimer

⚠️Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.

Product Overview Video

This video provides a general overview of the Zefiora S10 Electric Bicycle Scooter, showcasing its design and features.

1. Setup and Assembly

After receiving your Zefiora S10, carefully check the package contents against the packing list. If any parts are missing or damaged, please contact customer support. For your safety, wear protective gloves during installation.

Special Note: Do not assemble or repair the scooter without powering it off. Improper assembly may cause risks of loss of control, bumping, or falling. Apply proper force when assembling; overtightening or undertightening can cause damage. Do not use unauthorized parts or attempt to ride an improperly installed scooter.

1.1. Packing List

The package includes the following items:

  • Zefiora S10 Electric Scooter
  • Suitcase
  • Car lock
  • Kickstand
  • User manual (this document)
  • Mobile phone holder
  • Charger
  • Allen keys (0.20inch/5mm, 0.24inch/6mm)
Zefiora S10 Electric Scooter and included accessories
The Zefiora S10 Electric Scooter with its main accessories.

1.2. Install Kickstand

  1. Locate the plastic bushing in the seat tube.
  2. Open the clamp and tighten the clamp nut clockwise.
  3. Tighten the pipe clamp handle and then tighten the pipe clamp nut twice to secure it firmly.

1.3. Install Handlebar Vertical Pipe

  1. Place the vertical pipe vertically and lock the rubber ring and fixed structure in the middle of the vertical pipe.
  2. Install the scooter in the straight vertical pipe and lock the fixed structure.
  3. Ensure the handlebar structure is fixed and the scooter does not shake.

1.4. Install Brake Lever

  1. Lift the brake lever up parallel to the handlebar.
  2. Adjust the brake lever angle and tighten the brake lever with a wrench.

1.5. Install Luggage Compartment

  1. Align the 6*16 screws in the trunk with the frame holes.
  2. Tighten the screws with a cross screwdriver from the upper part, and fix the nuts with a wrench from the lower part.

2. Operating Instructions

2.1. Instrument and Controls

The Zefiora S10 features a digital display on the handlebar. To operate the scooter, turn the handle to introduce power. The scooter is started using a key.

Digital display and controls on Zefiora S10 handlebar
Handlebar with digital display, key ignition, and brake lever.

The digital display provides essential information during operation.

2.2. Brake Adjustment and Use

The Zefiora S10 is equipped with mechanical disc brakes. Proper adjustment is crucial for safe operation.

Brake Adjustment:

  • Before adjusting, ensure the brake cable is properly inserted into the lock lever. Replace bent or damaged disc rotors.
  • If the brake is not flexible, loosen the fixing bolt of the brake cable, shorten the braking distance of the cable, and then tighten the bolt.
  • If the brake is too sensitive, increase the distance of the brake cable.
  • If the rotor rubs against the brake pad or has excessive clearance, loosen the two centering adjustment screws (do not remove them). Turn the wheel slowly and adjust the brake pad position to avoid friction. After adjustment, tighten the screws.

Using the Brake:

The brake is for speed control, not just stopping. Maximum braking force is achieved just before the wheel locks and skids. Practice gentle, progressive braking to maintain control.

  • Gradually push the lock lever towards the handlebar to increase braking force.
  • If wheels get stuck, reduce braking force to allow them to spin again.

2.3. Charging the Battery

Important: Use only the original special charger. Mixed use with other chargers or voltages is forbidden. Charging time should not exceed 12 hours, and charging current should not exceed 3A.

  1. Insert the charger probe into the charger port on the electric bike battery.
  2. Insert the tip of the charger wire into the battery charger unit.
  3. Insert the AC power plug into a standard AC power socket.
  4. The charger's indicator light will be red during charging. It will turn green when the battery is fully charged.
Battery charging port and charger
Illustrative image of the scooter's battery area, where the charging port is located.

Caution: Do not use the scooter while charging or connected to a charger. Ensure the charging port is dry and free of foreign objects. Use a correct socket (100V-240V/50HZ-60HZ). Keep the scooter beyond children's reach during charging and away from flammable objects.

3. Maintenance

Regular maintenance is essential for the longevity and safe operation of your Zefiora S10. It is recommended to have the scooter adjusted at a local scooter shop twice a year. Critical components should be inspected, repaired, and adjusted by experienced personnel.

3.1. Periodic Maintenance and Self-Inspection

  • Check that the front and rear wheel screws are tightened.
  • Inspect tire tread for wear or cracks, and ensure front and rear tire pressure is suitable (35-65 PSI / 280-450 KPA). Verify the driving system is unblocked.
  • Check all joints for normal function and ensure the braking wire fastener is lubricated.
  • Regularly check brake function. Be aware that braking distance increases on rainy/snowy days or during downhill riding.
  • Lubricate the front axle, center axle, flywheel, and pivot point of the front fork shock absorber semi-annually. Apply grease or engine oil as required.
  • To adjust the brake system: Loosen screws on the brake wire fixed seat, then tighten or loosen the brake wire until the average distance between the two sides of the pads and the disc is 0.3mm-0.5mm. Finally, tighten the screws.

3.2. Cleaning

  • Do not wash the scooter with water to avoid wetting internal electronic parts and wires, which could cause accidents.
  • Do not apply oil to the front/rear brake, rim, or tire.

3.3. Battery Maintenance

  • Charge the battery timely after riding, especially when it reaches 30-50% capacity, to prolong service life. Avoid deep discharge.
  • If storing the scooter for more than two months, charge the battery regularly to maintain its health. Fully charge the battery before long-term storage.
  • Store the battery in a dry, low-humidity place, ideally between 5°C-20°C. Protect it from extreme temperature fluctuations and direct sunlight.
  • Charge the stored battery every 2 months.
  • It is normal for battery capacity to decrease slowly over time. Battery power cannot be restored once it reaches its final life cycle.

Battery Precautions:

  • Store the battery between -20°C and 45°C. Do not place it above 45°C. Below -20°C, the battery may self-lock and become unusable.
  • Keep the battery dry. Avoid acid/alkali liquids, rain, fire, or high temperatures. Keep metal contacts clean with a soft, dry cloth.
  • Do not reversely connect anode and cathode, damage, disassemble, or short-circuit the battery.
  • Use only the original battery and charger. Do not use other brands.
  • If the battery or charger is immersed in water, immediately power off the product, disconnect the motor from the battery, stop charging, and contact technical support. Do not restart without guidance.

Battery Disposal:

  • Recycle or discard the battery in an environmentally friendly way.
  • Do not throw the battery into fire; it may explode or leak.
  • Do not discard the battery in ordinary household garbage.
Battery recycling symbols
Symbols indicating proper battery recycling and disposal.

4. Troubleshooting

This section addresses common issues you might encounter with your Zefiora S10 electric scooter. For more complex problems, please refer to the Warranty/Support section for contact information.

  • Scooter not turning on: Ensure the battery is fully charged and properly locked with the key. Check all connections.
  • Reduced range or power: Verify tire pressure (35-65 PSI). Avoid frequent braking and overloading. Ensure the battery is not experiencing deep discharge.
  • Brakes not responsive: Check brake cable tension and adjustment as described in the "Brake Adjustment" section. Ensure brake pads are not excessively worn.
  • Unusual noises: Inspect for loose screws or components. Check for any rubbing parts, especially around the wheels and brakes.
  • Motor not engaging: Ensure the scooter is powered on and the throttle is correctly engaged. Check for any error codes on the digital display.

Always perform a pre-ride check to identify potential issues early.

5. Specifications

The following table details the technical specifications of the Zefiora S10 Electric Bicycle Scooter:

Category Item Parameter
Basic Parameters Dimensions 107*20*58.5 CM
Wheel Dimension 14 Inches (350mm)
Frame Material Iron / Aluminum alloy
Load Capacity 120 KG (Max Load 300 lbs)
Scooter Weight 25.6 KG (56 lbs)
Max Speed <25 km/h (20 MPH / 25 MPH Peak)
Performance Parameters Max Gradient 9-10° (Max Slope 25°)
Range per Power 31 - 60 km
Working Temperature -10°C ~ 55°C
Rated Passenger Capacity One Seat
Motor Parameters Wattage > 500W (500W P≤740W, 800W Peak Power)
Motor Type Brushless Hub Motor
Folded No (Compact & Foldable design)
Battery Parameters Power Supply / Source Lithium Battery
Voltage 48V
Battery Capacity 15/17.5AH
Charger Parameters Input Voltage 110-260V DC
Input Current ≤2.8A
Output Voltage 54.6V
Output Current 2A
Charging Time 5-7H
Other Parameters Instrument LCD Instrument
Brake Front and Rear Disc Brake
Anti-vibration Mounting Four Shock Absorbers
Car Light Front and Rear Lamps and Brake Taillight
Tire Model 14 (Internal and external tire: 14x2.215IN A/V nozzle)
Package Package Weight 33 KG
Zefiora S10 Electric Scooter with dimensions and weight
Key dimensions and weight specifications of the Zefiora S10.
Zefiora S10 Electric Scooter performance features
Performance highlights including peak power, max speed, and slope capability.

6. Safety Precautions

The Zefiora S10 is a personal transportation tool. Please follow all safety guidelines to minimize risks of injury, collision, or loss of control. Read and observe these precautions carefully.

6.1. General Riding Precautions

  • Always wear a helmet and other protective equipment while riding.
  • Wear clothes with fluorescent and reflective stripes when riding at night.
  • Wear tinted spectacles when riding under the sun.
  • Do not ride overspeed; it is a primary cause of traffic accidents.
  • Observe local laws and regulations regarding electric scooters.
  • Do not ride in humid environments, as the scooter may slip, causing injury or damage to electronics.
  • Avoid prolonged exposure to sunlight or rain. Do not store the scooter in hot places or areas with corrosive gas.
  • Do not lend the scooter to others who cannot ride it.
  • Avoid frequent braking, driving against wind, carrying passengers or heavy objects, and insufficient tire pressure, as these reduce endurance mileage.
  • Always check the scooter's condition before riding, including brakes, tire pressure, and tightened screws.
  • Do not ride on highways or motorways.
  • Do not disassemble parts at will. Contact support for standard parts if needed.
  • Do not disassemble or modify the scooter without authorization.
  • Do not use the product under extreme weather conditions (heavy rain, snow, freezing weather).
  • Always lock the battery with the provided key and remove the key before riding.
  • The scooter is for individual use only; it cannot be used by multiple persons simultaneously.
  • Do not wear headphones or use cell phones while riding.
Rider wearing a helmet
Always wear a helmet for safety.

6.2. Riding Environment and Conditions

  • Find a suitable open and flat area (at least 4m*20m) to practice riding.
  • Master riding conditions nearby to avoid disturbances from cars, pedestrians, pets, or other obstacles.
  • Do not test the scooter on slippery ground.
  • Be careful of obstacles and slippery roads. Do not ride on grass or cobblestones.
  • Do not ride in water deeper than 30mm.
  • Do not immerse the scooter in water.
  • Do not climb slopes over 30°, and avoid sharp acceleration or deceleration on slopes.
  • Do not ride up and down stairs or curbs.
  • Pay attention to obstacles above your head while riding.
Scooter avoiding deep water
Avoid riding in water deeper than 30mm.

7. User Tips

  • Optimize Range: To achieve the best endurance mileage, adopt a low-speed mode and avoid frequent braking. Ensure tires are properly inflated (35-65 PSI).
  • Battery Longevity: Charge your battery regularly, especially when it reaches 30-50% capacity, and avoid letting it fully discharge. For long-term storage, fully charge the battery and store it in a cool, dry place, recharging every two months.
  • Pre-Ride Checks: Always perform a quick check before each ride: verify brake function, tire pressure, and ensure all screws are tightened.
  • Safe Braking: Practice progressive braking to maintain control. In emergencies, brake the rear wheel first, then the front wheel to avoid tipping over.
  • Security: Consider equipping a professional scooter lock to prevent theft when the scooter is not in use.

8. Warranty and Support

Zefiora provides after-sales services for the S10 Electric Bicycle Scooter. Please refer to the warranty periods for specific components below:

Category Component Warranty Period
Appendix 1 Charger 12 months
Part 1 Battery bag 12 months
Part 2 Battery holder 12 months
Part 3 Crank 6 months
Part 4 Seat cushion 6 months
Wear Parts Brake lining 1 month
Chain 1 month
Presented Parts Toolkit 0 months
Mudguard 0 months
Power System Battery 12 months
Motor 12 months
Controller 12 months
Instrument 6 months
Electrical System Power-off brake handle 6 months
Key switch 6 months
Headlamp 6 months
Sensor 6 months
Variable Speed System Left and right thumb shifters 6 months
Fluted disc 6 months

Warranty Exclusions:

The warranty does not cover consumables, gift items, or issues arising from the following conditions:

  • Faults caused by operation not in accordance with this user manual.
  • Normal wear and tear, accidents, abuse, neglect, improper assembly, or improper maintenance of parts, and improper use of accessories.
  • Parts subject to natural wear under normal use.
  • Failure of correct change and maintenance, or faults and damage of other parts due to wear of consumables.
  • Warranty card not matching the scooter model, or if the scooter model has been changed.
  • Damage caused by overloading, riding over obstacles (including going down steps and falling), extreme sports, etc.
  • Damage caused by force majeure (e.g., fire, earthquake, lightning strike, flood).
  • Damage caused by collision during use.
  • Damage due to over-discharge or under-discharge of the battery. A fully charged battery typically endures 90 days in standby mode. Charge the battery after every use.

Support Contact:

For any questions or support needs, please contact us. We aim to reply and resolve problems within 24 hours.

Email: upleeshop@outlook.com

Zefiora reserves the final interpretation right of all terms and conditions in this manual.

MADE IN CHINA

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.