diymore 4S PD100W Bidirectional Fast Charging Module

Contents

User Manual: 4S PD100W Bidirectional Fast Charging Buck-Boost Module

Model: 4S PD100W Bidirectional Fast Charging Module

Brand: diymore

1. Product Overview

This module is a robust 4S (4-series) bidirectional fast charging and discharging solution, offering up to 100W (20V/5A) power delivery. It features intelligent buck-boost circuitry, making it compatible with various lithium battery types (LiFePO4, Ternary Lithium) and suitable for power banks, energy storage systems, and other applications. The module includes a real-time digital display for battery percentage, current, and voltage.

PD 100W Fast Charging Module with features

Figure 1: PD 100W Fast Charging Module highlighting 100W High Power, 4-stage buck-boost converter, and integrated charge/discharge.

Video 1: Product demonstration and feature overview.

2. Setup and Wiring

2.1 Safety Precautions

  • Never solder while energized. Ensure all wires are de-energized before soldering to prevent accidents.
  • The main board only has positive (+) and negative (-) terminals. Soldering while powered on risks burning components due to hand tremors.
  • Always disconnect power before soldering.

2.2 Wiring Instructions

For a 4-series battery pack, follow these steps carefully:

  1. Start wiring from the negative terminal of your battery pack.
  2. The first positive terminal is B1 (4.2V for LiFePO4, 3.6V for LiFePO4).
  3. Subsequent terminals are B2 (8.4V), B3 (12.6V), and B+ (positive terminal at 16.8V).
  4. Connect the protection board's P+ and P- terminals to the main board's positive (+) and negative (-) terminals respectively.
  5. Important: Connect the main board's + and - terminals first. Solder the battery pack's negative terminal last.
  6. The main board's two wires cannot balance the batteries. The balancing protection function resides on a separate lithium battery protection board. An additional lithium battery protection board with balancing functionality can be added if needed.
Battery wiring diagram for 4S pack

Figure 2: Battery wiring diagram showing connections for B+, B3, B2, B1, and B-.

2.3 Battery Activation

If the battery has charge but fails to power on after connection, you must activate it first. Connect a charger to the module's Type-C port to activate the battery. All batteries require activation regardless of their initial charge level.

3. Operating Instructions

3.1 Charging and Discharging

The module supports bidirectional charging and discharging. Connect your power source or device to the appropriate ports:

  • Type-C Ports (PD100W): Both Type-C ports support PD100W (20V/5A) for both input and output.
  • USB Ports: USB ports support SCP22.5W (4.5V/5A) and 18W/20W (9V/2A) for output.
Battery Percentage Display Interface Current and Voltage

Figure 3: Port specifications and display information.

3.2 Display Information

The module features a real-time digital display that shows:

  • Battery Percentage
  • Interface Current (A)
  • Interface Voltage (V)

The voltage displayed for the non-display power supply section indicates the interface voltage.

3.3 Charging/Discharging Behavior

  • During use, charging may stop at 80% or discharging may halt at 20% due to voltage inconsistency across battery cells.
  • In severe cases of voltage inconsistency, a fully charged battery might show 4.2V while other cells drop below 3V, rendering the entire system unusable.

4. Maintenance

  • Keep the module dry and avoid exposure to moisture or extreme temperatures.
  • Avoid physical shock or dropping the module.
  • Under heavy load, the inductor coil may heat up. Active cooling (e.g., a small fan) is recommended for sustained high-power operation to ensure optimal performance and longevity.

5. Troubleshooting

  • Inaccurate Battery Level Display on First Power-Up: The initial power-on may not display the battery level accurately. Normal display will resume after one or a few charge/discharge cycles.
  • Battery Not Powering On After Connection: If the battery has charge but the module does not light up or function, activate it by charging via one of the Type-C ports.
  • Inaccurate Level Display Due to Default Capacity: The default capacity is 500mAh per cell. Significant variations in actual cell capacity may cause inaccurate level display, but this does not affect other functions. Overcharging or over-discharging is not a concern for the module's protection features.
  • Voltage Inconsistency Issues: If charging stops at 80% or discharging halts at 20%, it may be due to voltage inconsistency between battery cells. Ensure your battery pack has balanced cells for optimal performance.

6. Specifications

FeatureSpecification
Type-C Port (PD)PD100W (20V/5A) Bidirectional
USB Ports (Output)SCP22.5W (4.5V/5A), 18W/20W (9V/2A)
Type-C1 Input5V-3A, 9V-3A, 12V-3A, 15V-3A
Type-C2 Input5V-3A, 9V-3A, 12V-3A, 15V-3A, 20V-3.25A
Type-C1 Output5V-3A, 9V-3A, 12V-3A, 15V-3A, 20V-5A
Type-C2 Output5V-3A, 9V-3A, 12V-3A, 15V-3A, 20V-3.25A
USBA1 Output5V-3A, 9V-2A, 12V-1.5A (22.5W)
USBA2 Output5V-3A, 9V-2A, 12V-1.5A (22.5W)
Battery CompatibilityLithium or Lithium Iron Phosphate (LiFePO4) batteries, 2 to 6 cells in series
DisplayBattery Percentage, Current (A), Voltage (V)
Module TypeModule
ConditionNew
Product Specifications Diagram

Figure 4: Visual representation of product specifications.

Power Bank Mainboard Compatibility

Figure 5: Module front and back view, illustrating compatibility with 2 to 6 cell battery packs.

7. User Tips

  • This module is highly versatile and can effectively power other devices requiring up to 100W, such as compatible soldering irons (e.g., FNIRSI HS-02A 100W).
  • For sustained high-power output or charging, consider adding active cooling to the module, especially around the inductor coil, as it can heat up under load.
  • For clarity, 'Ternary Lithium' batteries typically refer to standard Li-ion batteries with a nominal voltage of 3.7V and a maximum charge voltage of 4.2V per cell.
  • Ensure your battery pack is well-balanced to prevent premature charging stops or discharging halts due to cell voltage discrepancies.

8. Warranty and Support

For warranty information, technical support, or further inquiries, please refer to the seller's store page or contact the seller directly. Additional documentation may be available in the provided PDF manual: View User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.