1. Introduction
This manual provides essential information for the safe and effective installation and operation of your RACBOX 3.0 Inch HID Bi-Xenon Projector Lens. This product is designed as an auxiliary accessory for automotive lighting, intended for the normal replacement and upgrade of original car lights. It is not for illegal modification or unauthorized use. Please read all instructions carefully before use.
2. Safety & Warnings
Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
3. Package Contents
The package typically includes:
- 2 x HID Bi-xenon Projector Lenses (Hella 5 type)
- Masks (selected variant, e.g., A, B, C, D, E, F, G, H, or No Mask)
- Installation accessories
Note: HID bulbs and ballasts are NOT included and must be purchased separately.
4. Specifications
| Feature | Description |
|---|---|
| Item Type | Other (Headlight Projector Lens) |
| Brand Name | RACBOX |
| Model Name | 3.0 inch bi xenon projector lens |
| Compatibility | Retrofit for Hella 3R G5 HID projector lens; Compatible with D1S, D1R, D2S, D2R, D3S, D3R, D4S, D4R bulbs. |
| Function | High/Low beam light projection |
| Lens Material | High clear glass, UV-CAT anti-ultraviolet crystal glass tube |
| Reflective Cup | Metal, best optical design, superb surface finish |
| Motor | High quality anti-seize motor for high/low beam switching |
| Working Temperature | -40°C to 105°C |
| Wiring | High temperature-resistant, high voltage-resistant |
| Driver Type | Left Hand Drive / Right Hand Drive (variant dependent) |
| Ballast/Bulb | Not included |
5. Installation Instructions
Professional installation is highly recommended. Incorrect installation may lead to product damage or vehicle electrical issues. Always ensure the vehicle's power is off and the headlight assembly is cool before beginning.
- Turn off the vehicle engine and ensure the existing headlight lamp is cool to the touch.
- Disconnect the power connector from the original bulb.
- Carefully remove the factory halogen bulb from the headlight housing.
- Install the new projector lens into the headlight housing. Ensure it is securely seated and aligned.
- Connect the necessary wiring for the projector lens (e.g., solenoid for high/low beam function) and fix it properly, ensuring no loose connections.
- Reconnect the main power to the headlight assembly and test the light function (both high and low beams).
- Once tested and confirmed working correctly, reassemble the headlight assembly and any removed vehicle components.
Note: If the light does not turn on after installation, please reverse the plug polarity and retest.
6. Operating Instructions
The RACBOX 3.0 Inch HID Bi-Xenon Projector Lens provides both high and low beam functionality. Once installed and connected to your vehicle's headlight system, the high and low beams will operate via your vehicle's standard headlight switch.
- Low Beam: Provides a wide and clear light pattern for general driving, minimizing glare for oncoming traffic.
- High Beam: Provides a focused and intense light pattern for maximum visibility when needed, typically in areas without oncoming traffic.
7. Maintenance
The RACBOX projector lenses are designed for durability and long lifespan. Minimal maintenance is required:
- Cleaning: Periodically clean the outer surface of the projector lens and headlight housing with a soft, damp cloth to remove dirt and debris. Avoid abrasive cleaners.
- Inspection: Regularly inspect the lenses and wiring for any signs of damage, loose connections, or wear. Address any issues promptly.
- Bulb Replacement: When replacing HID bulbs, ensure the projector lens is cool and follow the bulb manufacturer's instructions carefully.
8. Troubleshooting
Light Does Not Turn On
- Check Polarity: If the light does not turn on after installation, reverse the plug polarity of the wiring connection and retest.
- Check Connections: Ensure all electrical connections are secure and properly seated.
- Check Bulbs/Ballasts: Verify that the HID bulbs and ballasts (if used) are functioning correctly and are properly connected.
- Inspect for Damage: Check the projector lens and wiring for any visible damage.
9. User Tips
- Ensure Compatibility: Before purchasing and installing, verify that these projector lenses are compatible with your specific vehicle's headlight housing and the HID bulbs you intend to use (D1S, D2S, D3S, D4S series).
- Professional Installation: For best results and to avoid potential issues, consider having the projector lenses installed by a qualified automotive technician.
- Brightness: Users have noted the excellent brightness of these lenses, providing a significant upgrade over standard lighting.
10. Frequently Asked Questions (FAQ)
- Q: Does the price include the bulbs?
- A: No, the projector lenses are sold separately without bulbs.
- Q: What color temperature is the bulb?
- A: The projector lens itself does not have a color temperature. The color temperature is determined by the HID bulbs you choose to install. If you need bulbs, please contact your seller for recommendations.
11. Manufacturer Information & Support
Manufacturer
Guangzhou Bai Ji Tun Trading Co., Ltd
C116, No. 1489, Fanghua Road Baiyun
Guangzhou, China
Email: tdlaccount@126.com
EU Authorized Representative
APEX CE SPECIALISTS LIMITED
UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK
NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND
Email: info@apex-ce.com
For product support or inquiries, please contact the manufacturer or your point of purchase.