quansheng UV-K1(8)

Contents

Quansheng UV-K1(8) Mini Walkie Talkie User Manual

Portable Multi-Band Transceiver

1. Introduction

Thank you for purchasing the Quansheng UV-K1(8) Mini Walkie Talkie. This device is a portable multi-band transceiver designed for reliable communication across various frequency ranges, including VHF, UHF, AM, and FM aviation bands. Its compact design, robust features, and user-friendly interface make it ideal for outdoor activities, professional use, and amateur radio enthusiasts.

This manual provides detailed instructions on how to set up, operate, and maintain your UV-K1(8) walkie talkie to ensure optimal performance and longevity.

Quansheng UV-K1(8) Mini Kong Walkie Talkie with key features listed

Figure 1: Quansheng UV-K1(8) Mini Kong Portable Multi-Band Transceiver highlighting features like 2500mAh battery, Type-C charging, USB programming, multi-band TX/RX, fast frequency matching, and wireless radio replication.

2. Setup

2.1 Package Contents

Carefully unpack your walkie talkie and check the contents against the list below. If any items are missing or damaged, please contact your dealer.

ItemQuantity
Walkie Talkie Unit1
Antenna1
Lithium Battery1
Belt Clip1
Battery Charger (Desktop)1
User Manual1

2.2 Battery Installation and Charging

Your walkie talkie comes with a lithium battery. The battery is not fully charged at the factory; please charge it before first use.

  1. Battery Installation: Align the battery with the grooves on the back of the walkie talkie and slide it upwards until it clicks into place.
  2. Initial Charging: For new batteries or those stored for over two months, the first charge may not reach full capacity. Repeat charging and discharging 2-3 times to achieve optimal battery performance.
  3. Desktop Charger Usage: Insert the lithium battery (or the walkie talkie with the battery installed) into the desktop charger. Ensure the battery contacts align with the charger terminals. The charger indicator will show red during charging and turn green when fully charged.
  4. Type-C Charging (for compatible models): The UV-K1(8) supports Type-C charging directly on the radio body and/or battery (depending on model). This is primarily for emergency charging. Charging via Type-C does not affect the radio's power-off state. The indicator light will be blue during charging and turn off when fully charged. Do not disassemble the battery when charging via Type-C.
Comparison of long and short battery versions for Quansheng UV-K1(8)

Figure 2: The UV-K1(8) is available with an expanded 2500mAh long battery or a 1400mAh short battery, both supporting Type-C charging.

2.3 Antenna Attachment

Screw the antenna clockwise into the connector on the top of the walkie talkie until it is firmly seated. Do not operate the radio without an antenna attached, as this can damage the transmitter.

2.4 Device Overview

Familiarize yourself with the main parts and controls of your UV-K1(8) walkie talkie:

  • Antenna: For transmitting and receiving signals.
  • Torchlight: Built-in LED flashlight.
  • Indicator Light: Shows radio status (TX/RX, charging).
  • Power/Volume Knob: Turn clockwise to power on and increase volume; counter-clockwise to decrease volume and power off.
  • Headset/Data Port: For connecting external audio accessories or programming cable.
  • PTT Key (Push-to-Talk): Press and hold to transmit, release to receive.
  • Side Key 1 / Side Key 2: Programmable function keys.
  • 1.44-inch Screen: Displays channel, frequency, status icons.
  • USB Programming Port / Type-C Charging Port: For connecting to a computer for programming or direct Type-C charging.
  • Number/Function Keys: For direct frequency input, channel selection, and menu navigation.
  • Battery Clip: For attaching the radio to a belt or pocket.
  • Hand Strip Hole: For attaching a wrist strap.
  • Base Charging Point: For use with the desktop charger.

Video 1: Official product overview and demonstration of the Quansheng UV-K1(8) Mini Kong, showcasing its features and components.

3. Operating Instructions

3.1 Power On/Off and Volume Control

Rotate the Power/Volume knob clockwise until you hear a click to turn on the radio. Continue rotating clockwise to increase the volume. Rotate counter-clockwise to decrease the volume and turn off the radio.

3.2 Basic Key Functions

  • PTT Key: Press and hold to transmit your voice. Release to listen for incoming transmissions.
  • MENU Key: Press to enter the main menu. Use the arrow keys to navigate and MENU again to confirm selections.
  • Arrow Keys (< / >): Used for navigating menu options, adjusting values, and changing channels/frequencies.
  • EXIT Key: Press to exit the current menu or function. Long press to return to the main screen.
  • Number/Function Keys (0-9, *, #): Used for direct frequency input, channel selection, and activating various functions (e.g., F+4 for frequency meter).

3.3 Frequency/Channel Mode

Your UV-K1(8) can operate in two main modes: Frequency Mode (VFO) and Channel Mode (MR).

  • Switching Modes: From the main screen, press F + 3 to toggle between VFO and MR modes.
  • Frequency Mode (VFO): Allows direct input of frequencies using the keypad. You can also use the arrow keys to adjust the frequency in steps.
  • Channel Mode (MR): Allows selection of pre-programmed channels. Use the arrow keys or number keys to select a channel.

3.4 Wireless Copy Frequency (Frequency Meter Function)

This feature allows you to quickly copy the frequency and CTCSS/DCS tones from another radio.

  1. Press F + 4 to activate the frequency meter function. The screen will display

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.