MRSVI MX3

Contents

MRSVI MX3 Air Mouse Remote Control User Manual

Model: MX3

1. Introduction

The MRSVI MX3 Air Mouse Remote Control is a versatile input device designed for various smart devices. It combines the functionality of an air mouse, a wireless keyboard, and a remote control with IR learning capabilities. Featuring 2.4G RF wireless communication and a 6-axis gyroscope, it offers precise motion sensing and control. This device is compatible with Smart TVs, Android TV Boxes, desktop computers, laptops, and projectors, providing a convenient and efficient way to navigate and interact with your media.

MRSVI MX3 Air Mouse Remote Control, showing front and back, and compatible devices
Figure 1: MRSVI MX3 Air Mouse Remote Control and compatible devices.

2. Setup

2.1 Package Contents

Before you begin, please ensure all items are present in the package:

  • 1 x MX3 Air Mouse
  • 1 x USB Wireless Receiver
MX3 Air Mouse and USB Wireless Receiver
Figure 2: Package contents of the MX3 Air Mouse.

2.2 Battery Installation

The MX3 Air Mouse requires 2 AAA batteries (not included). To install the batteries:

  1. Open the battery compartment cover on the back of the remote control.
  2. Insert two AAA batteries, ensuring correct polarity (+/-).
  3. Close the battery compartment cover securely.
Back of MX3 remote with battery cover removed, showing battery compartment and USB receiver storage
Figure 3: Battery compartment and USB receiver storage.

2.3 Connecting the USB Receiver

The MX3 Air Mouse uses a 2.4G wireless connection via a USB receiver. The device is typically pre-paired at the factory, allowing for plug-and-play functionality.

  1. Locate the USB Wireless Receiver (often stored inside the battery compartment).
  2. Insert the USB receiver into an available USB port on your Smart TV, Android TV Box, Windows PC, or other compatible device.
  3. The device should automatically recognize the remote control.
Laptop with USB receiver inserted, and the MX3 remote control
Figure 4: Connecting the USB receiver for 2.4G wireless connection.

3. Operating Instructions

3.1 Basic Functions and Button Layout

The MX3 remote control features 81 keys, including standard remote functions, a full QWERTY keyboard, and dedicated media keys. Refer to the diagram below for button identification:

Diagram of the MX3 remote control's front face with labeled buttons
Figure 5: Front face button layout and functions.
  • Power Button: Top left corner to turn devices on/off (requires IR learning for some devices).
  • LED Indicator: Shows device status.
  • Home/Menu/Return: Navigation buttons.
  • Volume Up/Down & Mute: Audio control.
  • Page Up/Down & Cursor Lock: Navigation and air mouse control.
  • IR Learning Set Key: Used for programming IR functions.
  • Backlight Button: Activates/deactivates the keyboard backlight.
  • Browser Button: Quick access to web browser.
  • IR Learning Keys: Four colored buttons at the bottom for IR programming.

3.2 Air Mouse Functionality

The MX3 Air Mouse is equipped with 3-Gyro and 3-Gsensor technology, enabling 360-degree motion recognition and precise cursor control. Simply point and move the remote in the air to control the on-screen cursor.

3.3 Wireless Keyboard

The reverse side of the remote features a full QWERTY keyboard with silica gel keys for a comfortable typing experience. This is ideal for searching, browsing, and entering text on compatible devices.

User holding the MX3 remote, showing the QWERTY keyboard side
Figure 6: Using the wireless QWERTY keyboard.

3.4 Backlight Feature

For use in low-light environments, the MX3 features a convenient backlight for both the remote control buttons and the keyboard. Press the backlight button to toggle this feature on or off.

Collage showing the MX3 remote with its backlight feature active
Figure 7: MX3 remote with active backlight.

3.5 System Compatibility

The MX3 Air Mouse Remote Control is compatible with a wide range of operating systems:

  • Android OS
  • Mac OS
  • Linux
  • Windows
MX3 remote control with USB receiver, showing compatibility logos for Android, Mac OS, Windows, and Linux
Figure 8: MX3 system compatibility.

4. IR Learning Function

The MX3 remote control supports IR learning, allowing you to program certain buttons to mimic functions from your existing TV remote control. This is particularly useful for the power button and the four colored buttons at the bottom.

Note: Please verify that your TV remote control supports the NEC protocol for successful IR learning.

4.1 IR Learning Operation Steps

  1. Ensure the IR transmitters of your TV remote and the MX3 Air Mouse are pointing directly at each other, with a short distance between them.
  2. Press and hold the 'TV' button on the MX3 remote for 4-5 seconds until the LED indicator flashes slowly.
  3. While the LED is flashing slowly, press the button on your TV remote that you wish the MX3 to learn (e.g., the power button).
  4. Once the MX3 receives the external IR signal, its LED indicator will become solid, confirming successful learning.
  5. Repeat steps 1-4 for any of the 5 programmable keys (Power button and 4 colored buttons).
  6. Press the 'TV' button again on the MX3 to exit and finish the learning process.
Diagram illustrating the IR learning process between a TV remote and the MX3 remote
Figure 9: IR learning process diagram.

5. Maintenance

To ensure the longevity and optimal performance of your MX3 Air Mouse Remote Control, follow these simple maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to wipe the surface of the remote. Avoid using liquid cleaners or abrasive materials, as they may damage the device.
  • Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Replacement: Replace batteries when the remote's performance degrades or the LED indicator signals low power. Always use new AAA batteries and dispose of old ones responsibly.
  • USB Receiver: When not in use, you can store the USB receiver in the dedicated slot within the battery compartment to prevent loss.

6. Troubleshooting

  • Remote not responding (indicator on but not working): If the LED indicator is on but the remote is not controlling your device, the pairing might have been lost. Try re-pairing the device:
    1. Press the 'TV' and 'OK' buttons on the remote simultaneously. The LED indicator will flash.
    2. While the LED is flashing, insert the USB receiver into your Windows PC or Android TV box.
    3. The LED indicator will stop flashing, indicating successful re-pairing.
  • IR Learning not working correctly: If you encounter issues with IR learning, you can reset the keyboard's IR learning memory:
    1. Press the 'TV' and 'DEL' keys simultaneously to reset the keyboard.
    2. After resetting, follow the IR learning steps outlined in Section 4.1.
  • Excessive Battery Drain: If the remote control depletes batteries rapidly, consider using high-quality rechargeable AAA batteries. Ensure the remote is not left with buttons pressed or in a state where the backlight remains on unnecessarily.

7. Specifications

Feature Detail
Transmission & Control 2.4G RF Wireless Radio Frequency Technology
Sensor 3-Gyro + 3-Gsensor
Key Number 81 keys
Control Distance >5m
Battery Type AAA*2 (not included)
Working Power Less than 10mA
Standby Power Micropampere (Energy Star compliant)
Material Plastic and Silicone
Dimensions (L*W*H) 172mm * 52mm * 19mm
Weight Approx. 100g
MX3 Remote Control dimensions
Figure 10: MX3 Remote Control dimensions.

8. User Tips

  • For optimal performance and to avoid frequent battery changes, consider using high-quality rechargeable AAA batteries.
  • Ensure a clear line of sight between the remote and the USB receiver for the best wireless connection, especially when using the air mouse function.
  • If you experience any lag or unresponsiveness, try moving closer to the device connected to the USB receiver.
  • When programming IR functions, ensure your original TV remote is working correctly and supports the NEC protocol.

9. Warranty and Support

For detailed warranty information and further support, please refer to the official user manual PDF provided by the manufacturer. You can access the PDF document here.

If you have any questions or require technical assistance, please contact the seller or manufacturer directly.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.