E-ACE B72P

Contents

E-ACE 4K 3-Channel Dash Cam User Manual

Model: B72P

1. Introduction

Thank you for choosing the E-ACE 4K 3-Channel Dash Cam. This device is designed to enhance your driving safety and provide reliable video evidence with its advanced features, including 4K Ultra HD recording, a 3-channel camera system (front, cabin, rear), built-in WiFi and GPS, G-sensor for collision detection, loop recording, and parking monitoring. Please read this manual carefully before use to ensure proper installation and operation.

E-ACE 4K 3-Channel Dash Cam with key features listed

Figure 1: E-ACE 4K 3-Channel Dash Cam highlighting features like 4K HD Video, Loop Recording, G-Sensor Lock, 170° View Angle, WiFi & APP control, Super Night Vision, and 24h Parking Monitor.

2. Product Overview

2.1. Appearance and Button Functions

Diagram of E-ACE Dash Cam with numbered parts and functions

Figure 2: Front view of the E-ACE Dash Cam with labels for WiFi, GPS, and 4K+1080P+1080P recording capabilities.

Refer to the diagram above for the location of buttons and ports:

  1. Up button: Page up in menu/playback, switch window displays, turn on/off WiFi (long press 3s), video playback up/down.
  2. M (Menu/Mode) button: Long press 2s to switch modes (recording/shooting/playback). Short press to enter main menu settings.
  3. Down button: Page down in menu/playback, video playback up/down, video lock (short press during recording), turn on/off recording (long press).
  4. Input port (TYPE-C): Power input.
  5. Rear camera port (AV): Connects the optional rear camera.
  6. TF card slot: Insert microSD card for storage.
  7. Power (OK) button: Long press 2s to power on/off. Short press to confirm selection or take a photo.

2.2. Product Showcase Video

Video 1: A brief overview and demonstration of the E-ACE 4K 3-Channel Dash Cam's features and design.

3. Installation Guide

3.1. Initial Setup

  1. Turn off the car engine.
  2. Insert TF Card: Insert a high-speed TF card (Class 10 or above, minimum 32GB, maximum 256GB) into the card slot of the recorder.
  3. Fix the Recorder: Securely fix the dashcam on the car windshield.

3.2. Power Connection

The dashcam can be powered via the car cigarette lighter or an optional Hardwire kit.

  1. Cigarette Lighter Power: Insert the car charger into the car's 12V power (Cigarette Lighter) port. Connect the car charger to the device's USB port. The device will start once the car engine launches. Use the original factory standard adapter charger.
  2. Hardwire Kit (Optional): If using a Hardwire kit (purchased separately), open the fuse box and correctly connect the B+, ACC, and GND lines to draw power from the car. This is recommended for parking monitoring and time-lapse recording functions.
Diagram showing dashcam installation on windshield and power connection

Figure 3: Illustration of dashcam placement on the windshield and power cable routing along the car's interior.

3.3. Rear Camera Installation (Optional)

If your package includes a rear camera:

  1. Install the rear camera at the rear of the vehicle, paying attention to its direction.
  2. Route the wiring along the roof of the vehicle.
  3. Connect the rear camera plug to the rear camera interface (AV port) of the recorder.
  4. Note: This dashcam does not support the reverse image function. Please ignore the red cable on the rear camera if present.
Diagram showing rear camera installation and vehicle compatibility

Figure 4: Rear camera installation showing its placement and compatibility with various vehicle types (Sedan, SUV, Roadster, Pickup, Truck, RV).

Diagram showing rear camera wiring and connection points

Figure 5: Detailed diagram for rear camera wiring, showing connection to the reversing light and the main unit.

3.4. Final Check

  1. Adjust the lens position to ensure it is level with the ground.
  2. Start the car engine. The system working indicator light should turn on. When recording starts, the video indicator light will flash, indicating successful installation.

4. Operating Instructions

4.1. Automatic Recording

When the car engine starts, the recorder automatically powers on and begins recording. The charging indicator lights up, and the recording indicator flashes. When the car engine is turned off, the recorder automatically saves the recorded content and shuts down.

4.2. Loop Recording

Recorded images are saved in segments on the TF card. When the TF card is full, the recorder will overwrite the earliest recorded images. The recording time period can be set in the menu (1, 2, or 3 minutes). If any of these options are selected, the recorder will overwrite older images when the TF card is full.

4.3. Collision Sensing (G-Sensor)

The built-in G-sensor detects vehicle collisions. If a collision occurs, the recorder will lock the video footage at the time of the accident and save it as a special, protected file that will not be overwritten by loop recording. A lock icon will appear in the upper left corner of the display. The G-sensor sensitivity can be adjusted in the settings menu.

Diagram showing triple-view recording angles and resolutions

Figure 6: Triple-view recording capabilities (Front: 4K 170° UHD, Cabin: 1080P 150° FHD, Rear: 1080P 150° FHD) capturing blind spots.

Diagram illustrating parking monitor and wide-angle recording

Figure 7: Parking Monitor and Wide Angle Recording showing how collisions trigger video locking to prevent overwriting.

4.4. Date and Time Setting

In standby mode, short press the M key to enter the system settings. Use the Up/Down keys to navigate to the date and time option, then press the OK key to enter. Adjust values with Up/Down keys and switch between year, month, day, and time cursors with the M key. The recorder's time can also be automatically synchronized when connected to mobile phone WiFi.

4.5. One-Button Mute Function

During operation, long press the Down button to mute the microphone. The microphone icon on the screen will change to a disabled icon, indicating that audio recording is off. Long press the Down button again to restore audio recording. Settings are automatically saved.

4.6. Playback of Recorded Files

With the camera powered on, press and hold the M key for 2-3 seconds to switch to playback mode. Use the Up/Down keys to find the desired file, then short press the OK key to play. To exit playback mode, short press the M key.

4.7. Parking Monitoring Function

This function requires the ACC three-core Hardwire kit (optional, purchased separately). When connected to the ACC power supply, you can enable parking monitoring in the menu interface. If the car vibrates slightly when turned off and parked, the recorder will automatically start emergency recording.

Screenshot of dashcam menu showing Parking Monitor setting

Figure 8: Dashcam menu interface showing the 'Parking monitor' and 'Gsensor sensity' options.

4.8. Time-Lapse Recording Function

This function also requires the ACC three-core Hardwire kit (optional, purchased separately). The time-lapse recording duration can be set to 15 minutes, 12 hours, or 24 hours. When enabled and the car is off/ACC disconnected, the recorder will enter time-lapse recording mode, indicated by a flashing red light. It exits time-lapse mode and returns to normal recording when the car starts.

Screenshot of dashcam menu showing Time-lapse recording duration setting

Figure 9: Dashcam menu interface showing 'Time-lapse recording duration' options.

4.9. WiFi APP Connection and Operation

This product connects to your smartphone via WiFi using the 'Viidure' APP (available for Android and iPhone).

  1. APP Download: Scan the QR code below or search for 'Viidure' in your app store to download and install the application.
QR code for Viidure APP download

Figure 10: QR code for downloading the 'Viidure' APP.

  1. Connect to WiFi: Power on the dashcam. On your mobile phone, go to WiFi settings and connect to the WiFi network named "HisDvr-******". The default password is 12345678.
  2. Access Camera View: Open the 'Viidure' APP. Tap the "Access Camera" icon to view the live feed.
  3. Video Playback and Settings: Within the app, you can play back recorded videos, access GPS-related information (if connected), and adjust tachograph parameters.
  4. Saving Videos to Mobile Phone: Videos stored in the mobile APP cannot be directly saved to the phone's album due to privacy agreements. To save, you must download them from the app's replay section. For iOS, check files in 'Replay', choose the video, and click 'Download'. For Android, downloaded videos are automatically saved to the phone's photo album.

5. Troubleshooting

5.1. APP Connection Issues (Black Screen/Flashback)

If you experience a black screen, flashback, or inability to access the APP after connecting to the recorder's WiFi:

  1. Android Phones: If your phone alerts "This WLAN network has no Internet access. Connect anyway," ensure you click "Connect anyway." If you ignored it or chose not to use, go to phone settings, "forget" the WiFi password, re-enter it, restart the phone, and select "Connect anyway."
  2. APP Permissions: If the issue persists, the APP's permissions might be limited. Uninstall and re-download the APP, then ensure all necessary permissions are granted.
  3. General Solution: Forgetting the WiFi password, re-entering it, uninstalling, and re-downloading the APP often resolves these issues. Always ensure you connect to the recorder's WiFi in your phone's settings before opening the APP.

5.2. Memory Card Issues (Not Reading/Intermittent Recording)

If the recorder does not read the memory card or records intermittently:

  1. Check Card Quality: Ensure you are using a genuine, high-speed (Class 10 or above) TF card from a reputable brand (e.g., SanDisk, Toshiba, Kingston). Ultra HD recorders require high-speed and stable memory cards. Replacing a low-quality card often resolves the problem.

5.3. Recorder Flash Screen or Abnormal Switch Off

If the recorder screen flashes or the device switches off abnormally:

  1. Power Connection: Verify that the power connector is properly plugged in.
  2. Power Supply: Check if the voltage and current of the power supply are sufficient. Instability or insufficient current (Ultra HD recorders require 5V/3A power) can cause these issues.

6. Specifications

FeatureSpecification
Brand NameE-ACE
Item TypeCar DVR
Assembly ModePortable Recorder
Chipset ManufacturerHISILICON
Frames Per Second25
Number Of Lenses3
Camera Resolution3840x2160
Imaging SensorSONY Starvis 2 IMX678
Pixels1800Mega
View angle170°
ApertureF1.6
Video CodeMJPG
Video FormatMOV, TS, MP4
Screen Ratio16:9
Display Size3.2 inches
Display TypeIPS
Built-in ScreenYes
Rear CameraYes (Optional)
Audio RecordedYes
Loop-Cycle Recording FeatureYes
Memory Card Required Reading SpeedClass 10
Special FeaturesG-Sensor, Display Rotate, Digital zoom, SD/MMC card, Anti Surge Voltage Impact, Waterproof, Anti Fog, Anti Vibration, Real Time Surveillance, Automatic White Balance, Wide Dynamic Range, WiFi function, Parking Monitor, External GPS
Power SourceCorded Electric
BatteryBuilt-In
Is Batteries IncludedYes
Original PackageYes
OSD LanguageAlbanian, Arabic, Armenian, Belarusian, Chinese (Simplified), Dutch, English, Filipino, Finnish, French, Japanese, Polish, Russian, Thai, Ukrainian, Vietnamese, Welsh
InterfaceAV-In
OriginMainland China

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the dashcam and lenses. Avoid using harsh chemicals or abrasive materials.
  • Temperature: Do not expose the device to extreme temperatures (hot or cold) for extended periods, as this can affect battery life and performance.
  • Firmware Updates: Check the manufacturer's website or the 'Viidure' APP periodically for firmware updates to ensure optimal performance and new features.
  • Data Backup: Regularly back up important video files from your TF card to a computer or cloud storage to prevent loss.
  • Avoid Disassembly: Do not attempt to personally dismantle the machine, as this will void the warranty and may cause damage.

8. User Tips

  • Optimal Card Usage: Always use a high-quality, high-speed (Class 10 or higher) microSD card to ensure smooth 4K recording and prevent data corruption.
  • Date/Time Accuracy: Ensure the date and time are correctly set, especially for evidence collection in case of incidents. Use the WiFi synchronization feature for convenience.
  • Hardwire Kit for Parking: For reliable parking monitoring and time-lapse recording, consider purchasing and installing the ACC three-core Hardwire kit.
  • Regular Formatting: Periodically format your TF card (e.g., once a month) within the dashcam's settings to maintain optimal performance and prevent fragmentation.
  • APP Connectivity: If you have trouble connecting the app, try forgetting the dashcam's WiFi network on your phone and reconnecting, ensuring you accept any prompts about no internet access.

9. Warranty and Support

9.1. Warranty Information

This product comes with a 365-day warranty from the date of purchase. The warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, unauthorized modifications, or improper installation.

9.2. Contact Information

For technical support, warranty claims, or any inquiries, please contact Yantop Group:

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.