1. Introduction
Thank you for choosing the RAGEER PSU Extension Cable Kit. This kit provides high-quality, sleeved power extension cables designed to enhance the aesthetics and improve cable management within your PC build. These cables extend your existing power supply unit (PSU) cables to reach components more easily and provide a cleaner, more organized look.
2. Package Contents
Please check the package for the following items:
- ATX 24-Pin Extension Cable
- CPU EPS 4+4-Pin Extension Cable
- GPU PCIe 6+2-Pin Extension Cable (quantity may vary based on kit purchased)
- Cable Combs (for cable organization)

Figure 1: RAGEER PSU Extension Cable Kit showing ATX 24PIN, CPU 4+4PIN, Graphics Card 6+2PIN cables and combs.
3. Setup and Installation
Important Note: These are extension cables and must be used with your existing modular PSU cables. Do not plug the male connector of these extension cables directly into a power outlet.
3.1. Installation Steps
- Identify Cables: Match the extension cable type (ATX 24-Pin, CPU 4+4-Pin, GPU 6+2-Pin) to the corresponding power cable from your PSU and the component on your motherboard or graphics card.
- Connect Female End: Plug the female connector of the extension cable into the male connector of your power supply unit's existing cable. Ensure a firm and secure connection.
- Connect Male End: Plug the male connector of the extension cable into the power input port of the target device (e.g., motherboard 24-pin, CPU 8-pin, GPU 6+2-pin). Ensure the connector is fully seated.
- Cable Management: Use the included cable combs to organize and straighten the sleeved cables for a clean and aesthetic look. Slide the combs along the cables to achieve the desired spacing and alignment.

Figure 2: Diagram showing the length (32cm/12.6inch) and types of cables (24PIN ATX, 4+4PIN CPU, 6+2PIN PCIE) with cable combs.

Figure 3: Detailed view of the Motherboard 24PIN, CPU 8(4+4)PIN, and Graphics Card 8(6+2)PIN connectors.

Figure 4: Schematic showing the 24Pin ATX, 4+4Pin EPS, and 6+2Pin PCI-E extension cables with their 32cm/12.6inch length.
4. Operating Instructions
Once properly installed, the RAGEER PSU Extension Cable Kit operates passively by extending the reach of your power supply cables. No specific operational steps are required beyond ensuring all connections are secure and your PC components are receiving power as expected. These cables are designed for reliable power delivery and aesthetic enhancement.
5. Maintenance
- Cleaning: To clean the cables, gently wipe them with a dry, lint-free cloth. Do not use liquid cleaners or abrasive materials.
- Inspection: Periodically inspect all cable connections to ensure they remain secure and free from dust or debris. Check for any signs of wear, fraying, or damage to the sleeving or connectors.
- Storage: If removing the cables for storage, coil them loosely and store them in a cool, dry place away from direct sunlight and extreme temperatures.
6. Troubleshooting
6.1. No Power or Intermittent Power to Components
- Check All Connections: Ensure that both ends of the extension cables (to the PSU cable and to the component) are fully seated and secure.
- Verify PSU Cables: Disconnect the extension cables and test the original PSU cables directly to the components to rule out issues with the power supply or original cables.
- Power Supply Capacity: Ensure your power supply unit has sufficient wattage to power all your PC components.
6.2. Cable Not Fitting or Connecting
- Correct Cable Type: Double-check that you are using the correct extension cable for the corresponding component (e.g., 24-pin ATX extension for the motherboard's 24-pin connector).
- Orientation: Ensure the connectors are oriented correctly before attempting to plug them in. Do not force connections, as this can damage the pins.
- Pin Alignment: If a pin appears out of place, gently try to realign it if possible, or contact support.
7. Specifications
| Brand | RAGEER |
| Type | Power Extension Cords |
| Cable Length | 32 cm (12.6 inches) |
| Wire Gauge | 18 AWG |
| Material | PET Braided Sleeving, Tinned Copper, PVC Insulation |
| Connectors Included | ATX 24-Pin, CPU EPS 4+4-Pin, GPU PCIe 6+2-Pin |
| Package | Yes |
| Origin | Mainland China |
| Package Dimensions (L x W x H) | 21 cm x 19 cm x 4 cm |
| Package Weight | 0.204 kg |

Figure 5: Illustration of the cable's construction: PET Braided Sleeving, PVC Insulation, and 18AWG Tinned Copper.
8. User Tips
- Cable Comb Installation: The included cable combs can be a bit tricky to install initially, but they are essential for keeping the cables straight and organized. Take your time to slide them into place.
- Secure Connections: Always ensure all connectors are fully seated and click into place. A loose connection can lead to power issues or instability. Do not force connectors if they don't fit; double-check the cable type and orientation.
- Extension Purpose: Remember these are extension cables. They must connect to your existing modular PSU cables, not directly to a wall outlet or non-modular PSU.
- Measure First: Before purchasing or installing, consider the length required for your specific PC case and component layout. While 32cm is standard, some builds might need different lengths.
- Aesthetic Enhancement: These cables are excellent for improving the visual appeal of your PC build and making cable management much cleaner.
- Performance: When properly installed, these extension cables should not cause any performance drops, overheating, or instability in your system.
9. Warranty and Support
For warranty information, please refer to the product listing page where you made your purchase or contact the seller directly. If you encounter any issues or have questions not covered in this manual, please reach out to RAGEER customer support for assistance.
This product also has a detailed user manual available in multiple languages. You can access it by scanning the QR code provided in the original packaging or by referring to the PDF document: User Manual (PDF).