Foreword
Thank you for purchasing the Godox IVM-S3 Stereo Cold Shoe Mount Microphone. The IVM-S3 is a versatile microphone designed for recording audio with smartphones and cameras in various scenarios, including shooting, interviews, parties, music shows, and small video productions.
Please read this manual carefully before using the product to ensure correct operation and to achieve optimal performance.
Main Features
- Cardioid Directivity: Effectively reduces surrounding noise for clear audio capture.
- Adjustable Pickup Angles: Supports $0^{\circ}/30^{\circ}/90^{\circ}$ and $180^{\circ}$ pickup from both front and back microphones, offering flexibility in sound capture.
- One-Click Low Cut Function: Filters unwanted noise below 150Hz with a single click.
- Stepless Gain Control: A 1-10 stepless gain knob allows for convenient and precise adjustment of pickup sensitivity (0-10dB range).
- Long-Lasting Battery: Built-in 470mAh lithium battery provides up to 15 hours of working time (approx. 12 hours in recording status).
- Internal Recording: Features an extra memory card slot in the TX, supporting a V30 MicroSD card for over 400 hours of continuous recording, functioning as an on-the-go recorder.
- Real-time Monitoring: Equipped with a built-in OLED screen and a headphone jack for effortless audio-visual monitoring.
- Universal Cold Shoe Port: Standard 1/4" universal cold shoe port for wide compatibility.
Product Overview
Figure 1: IVM-S3 Microphone Structure
- Built-in Mic 1
- Gain Adjustment Dial
- Power Switch/Low Cut Button
- Bi-directional Pickup Button
- Recording Button
- OLED Display
- Built-in Mic 2
- Built-in Mic 3
- 3.5mm Audio Output Port
- 3.5mm Earphone Monitoring Port
- 1/4" Cold Shoe
- TF Card Slot
- Type-C Charging Port
- Reset Hole
OLED Display
Figure 2: OLED Display Interface
- LR Soundbyte Icon: Varies with sound volume. Yellow indicates normal pickup, red indicates sound overload.
- Recording Icon
- Bi-directional Pickup Icon
- Low Cut Icon
- Battery Level Icon
What's in the Box
Figure 3: Standard Package Contents
- Microphone x1
- Type-C Charging Cable x1
- 3.5mm TRS-TRS Audio Connect Cable x1
- 3.5mm TRS-TRRS Audio Connect Cable x1
- Furry Windscreen x3
- Instruction Manual x1
Note: Due to continuous updates and upgrades, there may be differences between the actual products and the pictures. The pictures are for reference only; actual products prevail.
Installation Instructions
1. Attaching to a Camera
- Before attaching to the camera, turn the microphone's fixing ring clockwise to loosen the cold shoe port until the microphone can be fully inserted into the camera's cold shoe. Then, tighten it by turning counter-clockwise.
- Connect one end of the 3.5mm TRS-TRS audio connect cable to the microphone output port and the other end to the camera's microphone input port.
Figure 4: Camera Installation
2. Attaching to a Smartphone
- Before attaching to the smartphone, turn the microphone's fixing ring clockwise to loosen the cold shoe port until the microphone can be fully inserted into the smartphone's bracket cold shoe. Then, tighten it by turning counter-clockwise.
- Connect one end of the 3.5mm TRS-TRRS audio connect cable to the microphone output port and the other end to the smartphone's microphone input port.
Figure 5: Smartphone Installation
Operating Instructions
1. Power Switch/Low Cut Button
- Power On/Off: Long press the power switch/low cut button for 3 seconds. The OLED display will light up or turn off accordingly.
- Low Cut Function: Short press the button to turn the low cut function on or off.
2. Bi-directional Pickup Button
- Short press the bi-directional pickup button once to activate bi-directional pickup mode, where both front and back microphones will pick up sound.
- Short press again to turn off bi-directional pickup mode.
3. Recording Button
- Short press the recording button to start or stop recording.
- The default duration for an audio file is 30 minutes. If recording is less than 30 minutes, it will be stored as one file. If it exceeds 30 minutes, the excess part will automatically be stored as another file.
Note on Recording Capacity:
- This product can record up to 500 files. The main interface will prompt '491/500' after 490 files are saved. Recording will stop when '500/500' is reached. To resume recording, you must delete the largest file first (the 500th), then the 499th, and so on.
- If the TF card space is less than 1GB, a warning will pop up on the main interface every 10 minutes. If it drops below 500MB, recording will automatically stop, even if currently in progress.
- Up to 100 files can be recorded in a single session, displayed as '1-100' and then changing to '2-1' thereafter.
- When recording with built-in microphones, the gain is at its default value, and there is no low-cut effect. A yellow exclamation mark indicates that nearly 500 files are saved or memory is less than 1GB. A red exclamation mark indicates that memory is full and recording cannot continue.
4. Gain Adjustment Dial
- Rotate the gain adjustment dial leftward to decrease the gain value.
- Rotate it rightward to increase the gain value. The adjustable range is from 1 to 10.
5. Pickup Angle Instruction
Figure 6: Adjustable Pickup Angles (0°, 30°, 90° Stereo Cardioid Modes)
The IVM-S3 offers flexible sound capture with adjustable pickup angles:
- 0° Stereo Cardioid Mode: Supports bi-directional pickup.
- 30° Stereo Cardioid Mode: Supports bi-directional pickup.
- 90° Stereo Cardioid Mode: Supports bi-directional pickup.
- 180° Bi-directional Pickup Mode: Achieved by adjusting the microphones to face front and rear.
6. Charging through Type-C Port
- Connect the microphone to a power source using the Type-C charging cable. It will automatically enter charging mode.
Note: The microphone functions normally during charging without affecting recording backup. If a TF card is inserted, short press the power switch button after connecting to a computer to eject the U disk. However, if the device is recording, the U disk cannot be ejected when connected to a computer and the power switch button is short pressed.
Technical Data
| Parameter | Value |
|---|---|
| Model | IVM-S3 |
| Directivity | Cardioid |
| Frequency Range | 50Hz-20KHz |
| Sensitivity | -38dB±2dB |
| Max. SPL | >100dB |
| SNR | >70dB |
| Output Impedance | 600Ω |
| Lithium Battery Parameters | 3.8V, 470mAh, 1.786Wh |
| Type-C Input | 5.0V/0.3A |
| Pickup Distance | 2m |
| Battery Life | Approx. 12h in recording status, approx. 15h in normal working status |
| Working Environment Temperature | -10°C ~ +45°C |
| Dimension | 139x53x45mm |
| Net Weight | 103g |
*Specifications and data are subject to changes without prior notice.
Frequency Response and Directivity
Figure 7: Frequency Response [dB/1V/Pa]
Figure 8: Directivity Pattern (1000 Hz)
Maintenance
- Avoid Sudden Drops: The device may malfunction after strong shocks, impacts, or excessive stress.
- Keep Dry: This product is not waterproof. Malfunction, rust, and corrosion may occur and become irreparable if soaked in water or exposed to high humidity.
- Avoid Sudden Temperature Changes: Condensation can occur if the device is moved from a cold environment to a warm one. To prevent this, place the microphone in a handbag or plastic bag beforehand.
- Keep Away from Strong Magnetic Fields: Strong static or magnetic fields produced by devices like radio transmitters can cause malfunction.
Safety Warnings
- The microphone is a precision instrument. Avoid dropping or subjecting it to impact to prevent malfunction.
- Do not disassemble, modify, or attempt to repair this product yourself. Any repairs should be performed by Godox or an authorized maintenance center.
- Always keep this product dry. Do not use it in rain or damp conditions, and do not immerse it in water.
- Do not store this product in direct sunlight, near heating devices, or in hot, humid, or dusty environments.
- Keep out of reach of children.
- Do not use in flammable or explosive environments. Pay attention to relevant warning signs in such environments.
- Do not store the product if the ambient temperature exceeds $45^{\circ}C$.
- Please read and follow all warnings and instructions provided by the manufacturer.
Troubleshooting
If you encounter issues with your Godox IVM-S3 microphone, please refer to the following common problems and solutions:
- Microphone not powering on: Ensure the battery is charged. Long press the power switch/low cut button for 3 seconds.
- Recording stops unexpectedly: Check the TF card storage. If memory is full or below 500MB, recording will stop. Delete old files or replace the card.
- Poor audio quality/excessive noise: Ensure the low cut function is enabled if recording in noisy environments. Adjust the gain control dial to an appropriate level (avoiding sound overload indicated by red on the OLED display).
- Microphone not recognized by computer: If the device is recording, it cannot be ejected as a U disk. Stop recording before connecting to the computer and short pressing the power button to eject.
- Physical damage or water exposure: Do not use the product if it has been dropped, impacted, or wetted. Contact customer support for repair.
Warranty and Support
This warranty card is an important certificate for maintenance service. Please fill out the form below and keep it safe.
Warranty Period and Service Types
| Product Type | Name | Maintenance Period (months) | Warranty Service Type |
|---|---|---|---|
| Parts | Product Main Body | 12 | Customer sends the product to designated site |
| Battery | 3 | Customer sends the product to designated site | |
| Charger, Electrical Parts etc. | 12 | Customer sends the product to designated site | |
| Other Items | Battery Case, Windscreen Foam, Wind Cap, Locking Device, Lanyard, Tie, Velcro Tape, Clip, Bag, Package etc. | No | Without warranty |
The warranty period is calculated from the purchase date, which is considered the date registered on the warranty card.
Inapplicable Cases for Warranty
The guarantee and service are not applicable in the following cases:
- The product or accessory has exceeded its warranty period.
- Breakage or damage caused by inappropriate usage, maintenance, or preservation (e.g., improper packing, usage, plugging in/out external equipment, falling or squeezing by external force, contact with improper temperature, solvent, acid, base, flooding, damp environments).
- Breakage or damage caused by non-authorized institutions or staff during installation, maintenance, alteration, addition, and detachment.
- The original identifying information of the product or accessory is modified, altered, or removed.
- No valid warranty card.
- Breakage or damage caused by using illegally authorized, non-standard, or non-publicly released software.
- Breakage or damage caused by force majeure or accident.
- Breakage or damage that cannot be attributed to the product itself.
In such situations, you should seek solutions from the related responsible parties. Godox assumes no responsibility. Normal discoloration, abrasion, and consumption are not considered breakage within the maintenance scope.
How to Obtain Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact Godox after-sale service. When applying for maintenance service, you should provide a valid warranty card. If a valid warranty card cannot be provided, service may still be offered if the product is confirmed to be within the maintenance scope, but this is not an obligation.
Godox After-sale Service Call: 0755-29609320-8062
For more information, you may refer to the official PDF user manual: Godox IVM-S3 User Manual (PDF)
Declaration of Conformity
GODOX Photo Equipment Co., Ltd. hereby declares that this equipment complies with the essential requirements and other relevant provisions of Directive 2014/35/EU and 2014/30/EU. It is allowed to be used in all EU member states.
For more information on the Declaration of Conformity, please visit: https://www.godox.com/eu-declaration-of-conformity