Herdio HOS-301

Contents

Herdio HOS-301 Outdoor Bluetooth Speaker Instruction Manual

Model: HOS-301 / HOS-301BT

Introduction

Thank you for choosing the Herdio HOS-301 Outdoor Bluetooth Speakers. These speakers are designed for universal indoor/outdoor installation, offering superior sound quality with a durable, waterproof, and weather-resistant construction. Featuring Bluetooth 5.3 for fast and stable connections, and versatile swivel brackets for optimal placement, they are ideal for various environments such as patios, home theaters, boats, garages, decks, and poolside areas.

Herdio HOS-301 speakers with IP66 waterproof and Bluetooth logos, showing water splashing

Image: Herdio HOS-301 speakers highlighting IP66 waterproof rating and Bluetooth connectivity.

Important Safety Information

  • Read all instructions carefully before use.
  • Keep the speakers away from extreme temperatures and direct sunlight.
  • Ensure all connections are secure before powering on the device.
  • Do not attempt to disassemble or repair the speakers yourself. Refer to qualified service personnel.
  • Use only the specified power adapter (12V) for the speakers.

Package Contents

Please check the box for the following items:

  • 2 x Passive Outdoor Speakers
  • 2 x Speaker Cables (2.5m)
  • 1 x 12V Power Adapter
  • 2 x Removable Mounting Brackets
  • 4 x Metal Screws
  • 1 x Owner's Manual
Contents of the Herdio HOS-301 speaker box, including two speakers, cables, and a power adapter

Image: Illustration of the items included in the product package.

Setup and Installation

Mounting the Speakers

The speakers feature versatile 180° swivel brackets for flexible placement. Follow these steps for secure installation:

  1. Remove the bracket knob and the bracket from the speaker.
  2. Attach the bracket to your desired mounting surface (e.g., wall, ceiling, boat deck). The bracket can be fixed horizontally or vertically. Ensure that the speaker wires can pass through the designated cable holes in the bracket. Align the bracket to be straight and use a level for accuracy.
  3. Mark the positions for the two screw holes and drill pilot holes on the mounting surface.
  4. Gently pull the speaker cable through the cable hole located in the center of the mounting bracket. Ensure that the holes in the mounting bracket align with the cable holes.
  5. Secure the bracket to the mounting surface using the provided metal screws and hardware.

Caution: Check speakers for in-phase and normal operating rear angle for best sound. Hand tighten the bracket knobs to ensure the entire installation is safe, secure, and firm.

Wiring Diagram (HOS-301BT)

The HOS-301BT model includes a powered speaker and a passive speaker. Connect them as follows:

  1. Connect the provided speaker cable from the output terminals of the powered speaker to the input terminals of the passive speaker.
  2. For audio input, connect your audio source to the 3.5mm AUX IN port on the powered speaker.
  3. Connect the 12V power adapter to the DC12V input port on the powered speaker and then to a power outlet.

Note: For the HOS-301 model (non-Bluetooth), an external amplifier (not included) is required to power the passive speakers.

Close-up of the speaker's rear panel, showing 3.5mm AUX-IN and Low Power 12V Input ports

Image: Rear panel of the speaker showing AUX IN and DC12V input ports.

Operating Instructions

Bluetooth Connectivity (HOS-301BT)

The HOS-301BT speakers feature an upgraded Bluetooth 5.3 chip for faster and more stable connections.

  1. Ensure the powered speaker is turned on and in Bluetooth pairing mode (usually indicated by a flashing LED).
  2. On your audio device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
  3. Select "Herdio HOS-301BT" (or similar name) from the list of devices to pair.
  4. Once paired, the LED indicator on the speaker will typically show a solid light, and you can begin streaming audio wirelessly.
Diagram illustrating Bluetooth 5.3 wireless connectivity from various devices to the Herdio speakers, with a range of 30ft+

Image: Bluetooth 5.3 wireless connectivity diagram showing connection to various devices.

AUX Input

For wired audio connections, use the 3.5mm AUX IN port:

  1. Connect one end of a 3.5mm audio cable (not included) to the AUX IN port on the powered speaker.
  2. Connect the other end of the 3.5mm audio cable to the headphone jack or audio output of your device.
  3. Ensure the speaker is powered on. Audio will play through the wired connection.

Maintenance

The Herdio HOS-301 speakers are designed for durability and are marine-grade waterproof (IP66). To ensure longevity and optimal performance:

  • Regularly wipe down the speaker enclosures with a soft, damp cloth to remove dirt and debris.
  • Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish and waterproof sealing.
  • While waterproof, avoid submerging the speakers for extended periods.
  • Inspect speaker cables and connections periodically for any signs of wear or damage.
  • Ensure the rust-proof speaker grille is free from obstructions.
Herdio speaker being splashed with water, demonstrating its marine-grade waterproof capabilities

Image: Speaker demonstrating its waterproof capabilities with water splashing.

Troubleshooting

No Sound:
Ensure the speakers are powered on and connected correctly. Check the volume levels on both the speakers and your audio source. Verify that the correct input source (Bluetooth or AUX) is selected.
Bluetooth Pairing Issues:
Make sure the speaker is in pairing mode. Disable and re-enable Bluetooth on your audio device. Move your device closer to the speaker (within 30ft). Try unpairing and re-pairing the device.
Distorted Audio:
Lower the volume on both the speaker and the audio source. Check for loose connections. Ensure the audio source is not sending an overdriven signal.
Intermittent Connection:
Ensure there are no obstructions between your device and the speaker. Move away from other wireless devices that might cause interference. Check the Bluetooth range (up to 30ft).

Specifications

Feature Specification
ModelHOS-301 / HOS-301BT
Speaker TypeOutdoor Speaker
Channels2 (2.0)
Peak Power200W (Pair)
RMS Power100W
Woofer Size3.5 inch
Tweeter Size1 inch
Frequency Range80Hz-20KHz
Impedance4 Ohms
Sensitivity89dB
Bluetooth Version5.3
Wireless Distance30ft
Input/OutputAUX
Voltage RangeUSB (5-20V DC) / 12V DC Input
Waterproof LevelMarine Grade Waterproof (IP66)
Product MaterialHeavy Duty Engineered Plastic Cabinet (ABS)
Dimensions (W x H x D)3.93" (100mm) x 3.85" (98mm) x 7.3" (185mm)
Item Weight3.19 pounds (approx. 1.45 kg)
Product dimension diagram showing width, height, and depth, along with a table of key specifications

Image: Product dimensions and detailed specifications table.

Warranty and Support

All Herdio speaker products come with a 1-year Limited Warranty against defects in materials and workmanship. Proof of purchase must accompany all claims. During the warranty period, Herdio will replace any defective part and correct any defect in workmanship without charge for either parts or labor.

The Technical Support Center at HERDIO is available from Monday to Friday, excluding holidays. If you have any questions or require technical assistance, please feel free to send your messages to our support team:

Email: support@herdiotech.com

For additional information, please visit: www.Herdiotech.com

User Tips

  • These speakers are well-suited for creating a pleasant background sound system in outdoor areas like patios or decks.
  • The Bluetooth functionality works reliably, allowing for easy wireless streaming from compatible devices.
  • Consider optimal placement using the swivel brackets to direct sound for the best listening experience in your chosen environment.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.