1. Introduction
Thank you for purchasing the TG-182 Solar Radio FM Bluetooth Speaker. This portable speaker combines multiple functionalities including Bluetooth audio streaming, FM radio, TF card and USB disk playback, AUX input, and hands-free calling. It features a solar charging panel for outdoor convenience and TWS (True Wireless Stereo) function for an enhanced audio experience. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your device.

Figure 1: TG-182 Solar Power Charge Bluetooth Speaker
2. Package Contents
- TG-182 Solar Radio FM Bluetooth Speaker
- Micro USB Charging Cable
- User Manual
3. Parts and Controls

Figure 2: Control Layout and Dimensions
- DC 5V Slot: Micro USB V8 charging port.
- AUX Line In Slot: 3.5mm audio input for external devices.
- TF Slot: For TF/Micro SD card playback (MP3 format).
- USB Slot: For USB disk playback (MP3 format).
- Power Switch (ON/OFF): Long press to power on or power off.
- Mode Switch (M): Short press to cycle through modes (USB card / TF card / Wireless / Line In / FM). For TWS pairing, long press for 3 seconds.
- Previous Song / Volume Down (-): Short press for previous song, long press to decrease volume.
- Play/Pause (▶/▮▮): Short press to play/pause music. In FM mode, short press to auto-search stations, press again to stop searching.
- Next Song / Volume Up (+): Short press for next song, long press to increase volume.
4. Setup
4.1 Initial Charging
Before first use, fully charge the speaker. Connect the supplied Micro USB cable to the DC 5V slot (1) on the speaker and the other end to a USB power adapter (not included) or a computer USB port. The charging indicator will illuminate. Charging time is approximately 3-4 hours.
4.2 Power On/Off
Long press the Power Switch (5) to turn the speaker ON or OFF. A voice prompt will indicate the status.
4.3 Bluetooth Pairing
- Turn on the speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing LED light and a voice prompt.
- On your mobile device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "TG-182" from the list of devices.
- Once paired, the speaker will give a voice prompt, and the LED light will stop flashing. You can now play audio from your device through the speaker.
5. Operating Instructions
5.1 Mode Switching
Short press the Mode Switch (M) (6) to cycle through available modes: Bluetooth, TF Card, USB Disk, AUX Line In, and FM Radio.
5.2 Bluetooth Playback
After successful pairing (see Section 4.3), open your music player on your device and start playback. Use the speaker's controls (7, 8, 9) or your device to manage music.
5.3 FM Radio
- Switch to FM mode using the Mode Switch (M).
- For better reception, insert the Micro USB charging cable into the DC 5V slot (1) as an external antenna.
- Short press the Play/Pause button (8) to automatically search for available FM stations. The speaker will scan and save stations.
- Once scanning is complete, use the Previous Song (-) (7) and Next Song (+) (9) buttons to navigate between saved stations.
5.4 TF Card / USB Disk Playback
- Insert a TF card into the TF Slot (3) or a USB disk into the USB Slot (4) with MP3 audio files.
- The speaker will automatically switch to the corresponding mode and begin playing music. If it doesn't, use the Mode Switch (M) (6) to select the correct mode.
- Use the speaker's controls (7, 8, 9) to manage playback.
5.5 AUX Line In
- Connect one end of a 3.5mm audio cable (not included) to the AUX Line In Slot (2) on the speaker and the other end to the audio output of your external device (e.g., MP3 player, computer, TV).
- Switch to AUX mode using the Mode Switch (M) (6).
- Audio will now play through the speaker. Control playback from your external device.
5.6 TWS (True Wireless Stereo) Function
The TWS function allows you to connect two TG-182 speakers together for a stereo sound experience.

Figure 3: TWS Connection Diagram
- Ensure both TG-182 speakers are powered on and are NOT connected to any Bluetooth device.
- On one of the speakers, long press the Mode Switch (M) (6) for 3 seconds. You will hear a prompt, and the speaker's LED light will stop flashing, indicating it's waiting to connect to another speaker.
- The two speakers will automatically pair with each other. Once connected, you will hear a confirmation prompt.
- Now, connect your mobile device to one of the paired speakers via Bluetooth (as per Section 4.3). Both speakers will play audio in stereo.
5.7 Hands-Free Calling
When your phone is connected to the speaker via Bluetooth, you can use the speaker for hands-free calls.

Figure 4: Hands-Free Calling and Connectivity
- Answer Call: Short press the Play/Pause button (8) when an incoming call rings.
- End Call: Short press the Play/Pause button (8) during a call.
- Redial Last Number: Double press the Play/Pause button (8).
6. Charging
6.1 USB Charging
Connect the Micro USB cable to the DC 5V slot (1) and a USB power source. The charging indicator will light up during charging and turn off when fully charged.
6.2 Solar Charging
The TG-182 speaker is equipped with a solar panel on top. Place the speaker in direct sunlight for passive charging. For optimal solar charging efficiency, ensure the solar panel is vertically irradiated by strong sunlight. Charging will be less effective in cloudy conditions or indirect light.
7. Maintenance
- Keep the speaker away from water, moisture, and extreme temperatures.
- Do not expose the speaker to direct sunlight for prolonged periods when not in use, especially in hot environments.
- Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Avoid dropping or subjecting the speaker to strong impacts.
- If the speaker will not be used for a long time, charge it at least once every three months to maintain battery health.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not turn on | Low battery | Charge the speaker fully. |
| No sound | Volume too low; Incorrect mode; Device not connected | Increase volume; Switch to correct mode; Re-pair Bluetooth device or check AUX connection. |
| Bluetooth connection fails | Speaker too far; Interference; Speaker already connected | Move speaker closer to device; Turn off other Bluetooth devices; Disconnect from other devices and re-pair. |
| Poor FM radio reception | Weak signal; No antenna | Insert Micro USB charging cable into DC 5V slot to act as an antenna; Try moving to a different location. |
| TF card/USB disk not playing | Incorrect format; Corrupted files; Card/disk not inserted properly | Ensure files are MP3 format; Check card/disk for corruption; Re-insert card/disk firmly. |
9. Specifications
| Feature | Specification |
|---|---|
| Wireless Version | V5.3 |
| Wireless Protocols | L2CAP/A2DP/AVCTP, HSP/HFP |
| Working Distance | Up to 10 meters |
| Signal-to-Noise Ratio (SNR) | ≥90dB |
| Battery Capacity | 3.7V 1200mAh |
| Playback Time (Normal Volume) | Approximately 3 hours |
| Speaker Driver Size | 52mm * 2 |
| Speaker Power | 4Ω/5W * 2 |
| Frequency Response | 120Hz-20KHz |
| Unit Dimensions (L x W x H) | 190 x 70.4 x 70.4 mm |
| Unit Weight | Approximately 548g |
| Charging Input | 5V/500mA |
| Charging Time | 3-4 hours |
| Solar Panel Power | 5.5V/0.9W |
| Input/Output | TF |
| Waterproof | Yes |
| Material | Plastic |
10. User Tips
- Many users appreciate the sound quality and quick charging via USB.
- For optimal FM radio reception, always connect the Micro USB charging cable to the speaker's DC 5V slot; it acts as an external antenna.
- Solar charging works best under direct, strong sunlight. Performance may vary in cloudy conditions.
11. Warranty and Support
For warranty information and technical support, please refer to the seller or your point of purchase. Keep your proof of purchase for any warranty claims.
12. Product Demonstration Video
Video: Product demonstration showing the TG-182 speaker in various colors and its features.