Projection Alarm Clock 90° Adjustable Projection Alarm Clock

Contents

90° Adjustable Projection Alarm Clock User Manual

Model: 90° Adjustable Projection Alarm Clock

Introduction

Thank you for purchasing the 90° Adjustable Projection Alarm Clock. This digital alarm clock features an LED display, adjustable time projection, 12/24-hour format, and a digital temperature display. Please read this manual carefully before use to ensure proper operation and to maximize your experience with the product.

Front view of the black projection alarm clock, displaying time, date, day, and temperature.
Front view of the black projection alarm clock, displaying time, date, day, and temperature.

Safety Information

⚠ WARNING: Keep out of reach of children. In case of ingestion, seek medical attention immediately.

⚠ WARNING: To avoid danger of suffocation, keep any plastic packaging bags away from babies and children. Do not use this bag in cribs, beds, carriages, or playpens. This bag is not a toy.

Please dispose of packaging materials responsibly. Refer to local recycling guidelines for proper disposal of electronic waste.

Package Contents

  • 1 x 90° Adjustable Projection Alarm Clock
  • 1 x User Manual (this document)

Product Overview

The alarm clock features a clear LED display, a rotatable projector, and intuitive controls for setting time, alarm, and other functions.

Side-by-side comparison of the black and white projection alarm clocks.
The Projection Alarm Clock is available in black and white variants.

Controls and Ports (Rear View)

Rear view of the white alarm clock, detailing the control buttons (RESET, MODE, SET, TIME, UP, DOWN), ON/OFF switch, 12/24H / °C/°F switch, DC 4.5V input, and battery compartment.
Rear view showing control buttons, switches, and power input.

Refer to the image above for the location of the following controls:

  • RESET Button: Resets the clock to factory settings.
  • MODE Button: Cycles through display modes (Time, Date, Alarm).
  • SET Button: Enters setting mode for time, date, or alarm.
  • TIME Button: Used in conjunction with SET for time adjustments.
  • UP Button: Increases values during setting.
  • DOWN Button: Decreases values during setting.
  • ON/OFF Switch: Powers the unit on or off.
  • 12/24H / °C/°F Switch: Toggles between 12-hour and 24-hour time format, and Celsius/Fahrenheit temperature display.
  • DC 4.5V Input: Power adapter connection (adapter not included, requires 3x AAA batteries or external DC 4.5V power).
  • Battery Compartment: Holds 3x AAA batteries (not included).
  • Projection Lens: Located on top, adjustable up to 90 degrees.
  • LIGHT Button: (Not visible in rear view, but mentioned in image 4) Controls backlight.

Setup

  1. Power Supply:
    • Open the battery compartment on the rear of the clock.
    • Insert 3x AAA batteries (not included), ensuring correct polarity (+/-).
    • Alternatively, connect a DC 4.5V power adapter (not included) to the DC 4.5V input port.
  2. Initial Power On:
    • Slide the ON/OFF switch to the "ON" position. The display should light up.
  3. Set Time and Date:
    • Press the MODE button until the time is displayed.
    • Press and hold the SET button until the hour digit flashes.
    • Use the UP and DOWN buttons to adjust the hour.
    • Press SET again to move to minutes, then adjust with UP/DOWN.
    • Continue pressing SET to cycle through year, month, and day settings, adjusting each with UP/DOWN.
    • Press MODE to exit setting mode.
  4. Set 12/24 Hour Format:
    • Slide the 12/24H switch to your preferred format.
  5. Set Temperature Unit:
    • Slide the °C/°F switch to select Celsius or Fahrenheit. The clock measures temperatures from 0°C-50°C (32°F-122°F).

Operating Instructions

Setting the Alarm

The clock supports a daily alarm with 8 selectable alarm songs and a snooze function.

The black alarm clock demonstrating its time projection feature, showing '12:01' projected on a surface. Includes text about daily alarm, 8 alarm songs, snooze, and temperature range (0°-50°C / 32°F-122°F) with C/F conversion.
The clock features a daily alarm with 8 selectable songs and snooze function.
  1. Press the MODE button repeatedly until the alarm time is displayed (usually indicated by an alarm icon).
  2. Press and hold the SET button until the alarm hour flashes.
  3. Use the UP and DOWN buttons to adjust the alarm hour.
  4. Press SET again to move to alarm minutes, then adjust with UP/DOWN.
  5. Press SET again to select the alarm melody (1-8). Use UP/DOWN to cycle through melodies.
  6. Press MODE to exit alarm setting mode.
  7. To activate/deactivate the alarm, briefly press the UP button while in alarm display mode. An alarm icon will appear/disappear on the display.

Using the Projection Feature

The projector can display the time onto a wall or ceiling. It is adjustable up to 90 degrees.

The white alarm clock illustrating backlight control via the LIGHT button or voice control (clap). Explains automatic backlight turn-off and time projection in dim environments.
The projection feature works best in dim environments and can be activated with voice control.
  • Rotate the projection lens on top of the clock to adjust the angle of the projected time.
  • In a dim environment, the projector will automatically project the time onto a flat surface (e.g., wall or ceiling).
  • The projected time will automatically turn off after a delay of 5 seconds.

Backlight Control

  • Press the LIGHT button (located on the top/front of the clock, not visible in rear view) to turn the display backlight on or off.
  • The backlight can also be activated by voice control (e.g., clapping your palm) within 1 meter of the device. The backlight will automatically turn off after a 5-second delay.

User Tips

  • When setting the time or alarm, ensure you press the SET button firmly and hold it until the digits flash to enter the setting mode.
  • Some users find the alarm sound (e.g., "Jingle Bells") to be specific. Experiment with the 8 available melodies to find one that suits you.
  • For optimal projection clarity, ensure the room is dark and the projection surface is flat and clear.
  • If using batteries, consider using rechargeable ones for environmental friendliness and convenience, as the backlight and projection can consume power.

Troubleshooting

Problem Possible Cause Solution
Clock display is blank or dim. No power, low batteries, or unit is off.
  1. Ensure the ON/OFF switch is in the "ON" position.
  2. Replace batteries with fresh ones or connect to a DC 4.5V power adapter.
Cannot set time/date/alarm. Not in setting mode, or buttons not pressed correctly.
  1. Press and hold the SET button until the digits flash.
  2. Ensure you are pressing the correct MODE button to cycle to the desired setting (time, date, alarm).
Projection is unclear or not visible. Room is too bright, projection angle is off, or surface is unsuitable.
  1. Ensure the room is sufficiently dark.
  2. Adjust the projection lens angle.
  3. Project onto a flat, light-colored surface.
Backlight not working or turning off too quickly. Voice control sensitivity, or temporary glitch.
  1. Press the LIGHT button to manually activate.
  2. Ensure no loud noises are accidentally triggering/disabling voice control.
  3. The backlight is designed to turn off after 5 seconds.
Alarm sound is not as expected. Specific melody selected. Cycle through the 8 available alarm melodies during alarm setup to find a preferred sound.

Specifications

Product Name 90° Adjustable Projection Alarm Clock
Model 90° Adjustable Projection Alarm Clock
Display Type LED Digital
Time Format 12H / 24H selectable
Temperature Range 0°C - 50°C (32°F - 122°F)
Temperature Unit Celsius / Fahrenheit selectable
Projection Angle Up to 90° adjustable
Alarm Songs 8 melodies
Snooze Function Yes
Backlight Control Button activated, Voice control (within 1 meter)
Power Supply 3x AAA batteries (not included) or DC 4.5V adapter (not included)
Battery Included No
Is Smart Device No
Dimensions (Approx.) 15 cm (Length) x 6 cm (Width) x 9 cm (Height)
Weight (Approx.) 0.23 kg
Manufacturer Harbin qingxuan trading co., ltd
Batch Number 2026020501

Maintenance

  • Cleaning: Wipe the clock surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Battery Replacement: If using batteries, replace them when the display becomes dim or functions become erratic. Remove batteries if the device will not be used for an extended period to prevent leakage.
  • Storage: Store the clock in a cool, dry place away from direct sunlight and extreme temperatures.

Frequently Asked Questions (FAQ)

Q: Does this clock come with batteries?
A: No, batteries are not included. It requires 3x AAA batteries or a DC 4.5V power adapter.
Q: How do I switch between Celsius and Fahrenheit?
A: There is a dedicated switch on the rear of the clock labeled "°C/°F" to toggle between the two temperature units.
Q: Can I keep the projection on continuously?
A: The projection is designed to turn off automatically after approximately 5 seconds to conserve power. It is primarily for quick checks in dim lighting.
Q: What kind of power adapter should I use?
A: A DC 4.5V power adapter (not included) can be used. Ensure the adapter's plug matches the clock's input port.

Warranty and Support

This product is manufactured by Harbin qingxuan trading co., ltd. For any questions or support needs, please refer to the seller's contact information provided at the point of purchase.

Please retain your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.