JETTING N-M2X1

Contents

PCIe x1 to M.2 (B+M Key) Adapter

Model: N-M2X1

1. Introduction

This adapter card allows you to connect an M.2 NGFF solid-state drive (SSD) to a desktop computer's PCIe x1 slot. It supports both PCIe X4 and PCIe X2 transport protocol M.2 SSDs, enabling you to expand your storage options or test M.2 SSDs on motherboards with limited M.2 slots.

2. Package Contents

  • 1 x NVMe PCIe x4 x2 M.2 NGFF SSD to PCIe x1 converter card adapter
  • 1 x Full height bracket with screws
PCIe x1 to M.2 Adapter Card and Bracket
Figure 1: Adapter card and full-height bracket included in the package.

3. Setup Guide

Follow these steps to install your M.2 SSD using the adapter card:

  1. Identify SSD Protocol: Determine if your M.2 NGFF SSD uses PCIe X4 or PCIe X2 transport protocol. This adapter does not support SATA protocol M.2 SSDs. Consult your SSD's manufacturer if unsure.
  2. Insert M.2 SSD: Carefully insert your M.2 NGFF SSD into the M.2 slot on the adapter card. Secure it with the provided screw if necessary.
  3. Install Bracket: Attach the full-height bracket to the adapter card using the provided screws.
  4. Connect to Motherboard: Power off your computer and open the case. Locate an available PCIe x1 slot on your motherboard. Insert the adapter card firmly into the PCIe x1 slot.
  5. Optimal Performance: For best performance, ensure the adapter is inserted into a PCIe 3.0 slot. Using PCIe 2.0 or PCIe 1.0 slots will result in significantly slower speeds.
Close-up of M.2 Adapter Card Features
Figure 2: Close-up view of the adapter card showing the M.2 slot, PCIe connector, and mounting points.
M.2 Adapter Card with Bracket Installed
Figure 3: Adapter card with the full-height bracket installed, ready for motherboard insertion.

4. Compatibility

  • Supported SSDs: This adapter card only supports M.2 NGFF solid-state drives using PCIE X4 or PCIE X2 transport protocols. It does NOT support M.2 SSDs with SATA transport protocol.
  • M.2 Keying: Compatible with M.2 (B+M Key) SSDs that utilize PCIe lanes.
  • Motherboard Slot: Requires an available PCIe x1 slot. Can also be inserted into PCIe x4, x8, or x16 slots.
  • Operating Systems: M.2 NGFF SSDs with PCIE X4 transport protocol can be AHCI or NVMe. Windows 7 does not natively recognize NVMe protocol SSDs; specific drivers or OS versions may be required.

5. Warnings and Safety Information

Warnings:

  • Consult your solid-state hard disk customer service to confirm compatibility before purchase and installation.
  • Do not insert the adapter card into a PCI slot (the older, typically white slots) to avoid damaging the motherboard, adapter card, and your solid-state hard disk. This product is designed for PCIe slots only.
  • The SSD with this adapter card may not run at its absolute full speed due to the PCIe x1 interface limitation, especially if the SSD is designed for PCIe x4.

Safety Information:

  • Keep the adapter card dry and away from moisture.
  • Store the adapter card in a static-free environment to prevent electrostatic discharge (ESD) damage.
  • Handle the adapter card by its edges to avoid touching components.

6. Specifications

Brand NameJETTING
ModelN-M2X1
Part Number415246
Item TypeOther Notebook Parts (Adapter Card)
Host InterfacePCIe x1
SSD InterfaceM.2 NGFF (B+M Key)
Supported SSD ProtocolsPCIe X4, PCIe X2 (NVMe/AHCI)
Dimensions (Approx.)Length: 14 cm, Width: 13 cm, Height: 3 cm
Weight (Approx.)0.035 kg
OriginMainland China

7. Troubleshooting

  • SSD Not Detected:
    • Ensure your M.2 SSD is securely seated in the adapter card.
    • Verify the adapter card is fully inserted into the PCIe slot on the motherboard.
    • Confirm your M.2 SSD uses PCIe X4 or PCIe X2 protocol, not SATA. SATA M.2 SSDs are not compatible.
    • Check your BIOS/UEFI settings to ensure the PCIe slot is enabled and configured correctly.
  • Slow Performance:
    • Ensure the adapter card is installed in a PCIe 3.0 slot for optimal speed. PCIe 2.0 or 1.0 slots will significantly reduce performance.
    • Remember that a PCIe x1 interface has bandwidth limitations compared to direct M.2 slots or PCIe x4 slots.
  • Windows 7 Not Recognizing NVMe SSD:
    • Windows 7 does not have native support for NVMe SSDs. You may need to install specific NVMe drivers from your SSD manufacturer or consider upgrading to a newer operating system.
  • System Instability/Damage:
    • If you experience system instability or suspect damage, immediately power off your computer. Ensure the adapter card was not incorrectly inserted into an older PCI slot.

8. User Tips

No specific user tips were available from provided reviews or Q&A content for this product.

9. Warranty and Support

For any issues, technical support, or warranty inquiries regarding your PCIe x1 to M.2 Adapter, please contact our store support directly. Refer to your purchase details for contact information.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.