1. Introduction
The MYOSLIM 22D-MAX is a professional-grade, non-invasive beauty equipment designed for comprehensive face and body management. Utilizing advanced technologies such as Focused Ultrasound, Radio Frequency, Laser, and IPL, this machine offers solutions for skin tightening, anti-aging, fat reduction, and body shaping. It features a 13.3-inch HD touch screen for intuitive operation and precise control over various treatment parameters.
This manual provides essential information for the safe and effective use of your 22D-MAX machine. Please read it thoroughly before operation.
2. Safety Information
Always adhere to the following safety guidelines to prevent injury or damage to the device:
- Ensure the device is connected to a power source matching the specified voltage (110V or 220V).
- Do not operate the device with wet hands or in damp environments.
- Keep the device out of reach of children.
- Consult a medical professional before use if you have any underlying health conditions, are pregnant, or have implanted electronic devices.
- Do not use on broken, irritated, or infected skin.
- Only use accessories and probes supplied or approved by the manufacturer.
- If the device malfunctions or shows signs of damage, discontinue use immediately and contact support.
3. Setup Guide
Follow these steps to set up your 22D-MAX machine:
Unpacking: Carefully remove all components from the packaging. Verify that all parts listed in the packing list are present and undamaged.
Figure 3.1: Frontal view of the 22D-MAX machine. Placement: Place the main unit on a stable, flat surface in a well-ventilated area, away from direct sunlight and heat sources.
Figure 3.2: Side view showing handle connections. Connect Handles: Connect the 13D Multi-Dim handle and 18D RS Multi-Dim handle to their respective ports on the main unit. Ensure connections are secure.
Power Connection: Connect the power cable to the machine and then to a suitable electrical outlet. Ensure the voltage matches your region (110V or 220V).
Power On: Locate the power button, typically on the back or side of the unit, and press it to turn on the machine.
Figure 3.3: Power button location. Initial Screen: The 13.3-inch HD touch screen will light up, displaying the main interface. The machine is now ready for operation.
For more detailed setup instructions, please refer to the official user manual (PDF) available at: 22D-MAX User Manual (PDF)
4. Operating Instructions
The 22D-MAX machine offers various functions for face and body treatments. Familiarize yourself with the touch screen interface and handle operations.
4.1. Overview of the 13.3 HD Touch Screen
The large HD touch screen provides clear visualization of treatment parameters and easy navigation.
4.2. Treatment Handles and Their Functions
The 22D-MAX comes with two primary handles: the 13D Multi-Dim handle for facial treatments and the 18D RS Multi-Dim handle for body shaping.
4.2.1. 13D Multi-Dim Handle (Facial Treatments)
This handle is designed for precision lifting, tightening, and contouring of facial areas. It delivers high-frequency energy to stimulate collagen regeneration.
- Point Mode: Offers flexible switching and arrangement from 1 to 13 output rows, allowing for precise energy control and targeted treatment for delicate areas. This mode can increase skin care efficiency by 150%–200%.
Facial Treatment Depths:
- 1.5mm: Superficial Cortex
- 3.0mm: Dermis
- 4.5mm: Fascia / Muscle Layer
4.2.2. 18D RS Multi-Dim Handle (Body Shaping)
This handle combines focused energy with RF technology to penetrate deep fat layers, accelerate fat metabolism, and enhance body contouring.
- 6.78MHz Spiral RF: Innovative spiral RF output heats tissue to 60–70°C, enhancing skin firming, slimming, and body contouring effects. This can increase fat dissolution efficiency by 165%–210%.
- MP Mode: Enhanced energy delivery for body treatments.
Body Treatment Depths:
- 6.0mm: Arm region
- 8.0mm: Dorsal region
- 10.0mm: Thigh, calf
- 13.0mm: Abdominal region
- 16.0mm / 18.0mm: Hip region
4.3. General Operation Steps
- Select Treatment Area: On the touch screen, choose the desired treatment area (face or body).
- Attach Appropriate Handle: Connect the 13D Multi-Dim handle for facial areas or the 18D RS Multi-Dim handle for body areas.
- Select Probe Depth: Choose the appropriate probe depth (e.g., 1.5mm, 3.0mm, 4.5mm for face; 6.0mm, 8.0mm, 10.0mm, 13.0mm, 16.0mm, 18.0mm for body) based on the treatment area and desired effect.
- Adjust Parameters: Set the power, width, length, pitch, and interval parameters on the screen according to the treatment protocol and client's comfort level.
- Apply Gel: Apply a thin layer of conductive gel to the treatment area.
- Begin Treatment: Place the handle firmly on the skin and activate the treatment. Move the handle smoothly and consistently across the target area as per the recommended technique.
- Monitor Progress: Observe the client's skin reaction and adjust parameters if necessary.
- End Treatment: Once the session is complete, turn off the handle, clean the skin, and power down the machine.
4.4. Product Demonstration Video
5. Care and Maintenance
Proper maintenance ensures the longevity and optimal performance of your 22D-MAX machine.
- Cleaning: After each use, wipe the handles and the main unit with a soft, damp cloth. Use a mild disinfectant solution if necessary. Ensure no liquid enters the device openings.
- Storage: Store the machine in a cool, dry place, away from direct sunlight and extreme temperatures. Keep handles and probes organized and protected from damage.
- Inspection: Regularly inspect cables, handles, and probes for any signs of wear or damage. Do not use damaged components.
- Professional Servicing: For any internal issues or complex repairs, contact authorized service personnel. Do not attempt to open or repair the device yourself.
6. Troubleshooting
If you encounter any issues with your 22D-MAX machine, refer to the following common problems and solutions:
- Machine does not power on:
- Check if the power cable is securely connected to both the machine and the power outlet.
- Ensure the power outlet is functional. - Touch screen is unresponsive:
- Restart the machine by turning it off and on again.
- Ensure your hands are clean and dry when operating the touch screen. - Handles not delivering energy:
- Verify that the handles are securely connected to the main unit.
- Check the selected parameters on the screen; ensure they are set correctly for treatment. - Unusual noise during operation:
- While the machine is designed for quiet operation, if you notice any abnormal or loud noises, power off the device immediately and contact technical support.
If the problem persists or is not listed here, please contact our technical support team for assistance.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | MYOSLIM |
| Model | 22D-MAX |
| Product Type | Face & Body Beauty Equipment |
| Technology Type | Laser/IPL/Radio Frequency, Focused Ultrasound |
| Voltage | 220V (US / EU / UK / AU Plug Types available) |
| Power Type | Electric |
| Number of Handles | 2 (13D Multi-Dim, 18D RS Multi-Dim) |
| Display | 13.3-inch HD Touch Screen |
| Functions | Fat Reduction, Skin Tightening, Face Lifting & Firming, Body Shaping, Anti-Aging, Skin Rejuvenation |
| Target Areas | Face, Arms, Abdomen, Waist, Legs, Buttocks |
| Application | Spa Center, Aesthetic Clinic, Home Beauty Use |
| Certification | CE |
| Package Length | 65 cm |
| Package Width | 56 cm |
| Package Height | 50 cm |
| Package Weight | 20.0 kg |
8. User Tips
- Client Comfort: The 22D-MAX operates quietly, contributing to a more relaxed treatment experience for clients.
- Ergonomic Design: The multi-dimensional handle is designed for a comfortable grip and smooth operation. The integrated display on the handle allows for quick parameter checks without needing to constantly look at the main unit.
- Long-lasting Results: For body treatments, fat reduction can continue for up to 6 months post-treatment, providing sustained results.
- Training Recommended: While the machine is user-friendly, understanding the different cartridges and settings for various treatment depths is crucial for optimal and safe results. Consider professional training to maximize the device's potential.
9. Frequently Asked Questions (FAQ)
- Q: Is this a complete machine or just accessories?
- A: This product is a complete 22D-MAX Professional Face & Body Shaping Machine. However, specific accessories or replacement parts may also be available for purchase separately.
10. Warranty and Support
Your 22D-MAX machine comes with a 1-year warranty, covering manufacturing defects. This warranty does not cover damage caused by improper use or human error.
For any questions, technical assistance, or warranty claims, please contact our customer support team. We offer:
- 24/7 customer support.
- Step-by-step operation guidance.
- Technical troubleshooting and function explanations.
- Access to professional technical team.
We also have Dual Repair Centers in Mexico and Europe to provide faster local after-sales service and quick replacements, reducing international shipping costs and repair times.
