WenQia WQ699

Contents

Wenqia RF 433Mhz Smart Home Wireless Remote Control Switch Instruction Manual

Model: WQ699

1. Safety Information

Please read all safety instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.

  • Ensure power is disconnected at the main circuit breaker before performing any wiring.
  • Installation should be performed by a qualified electrician or in accordance with local electrical codes.
  • Do not exceed the maximum load rating of 10A.
  • Keep the device away from water and high humidity environments.
  • Do not attempt to repair or modify the device. Contact support if issues arise.

2. Product Overview

The Wenqia RF 433Mhz Smart Home Wireless Remote Control Switch system consists of a compact relay receiver and one or more remote controls. This system allows for convenient wireless control of various electrical appliances such as lights and fans.

Wenqia RF 433Mhz Smart Switch Receiver and Remote Controls

Figure 1: Smart Switch Receiver and various remote control options.

Components:

  • Smart Switch Receiver: The main unit that connects to your electrical load. It features a learning button for pairing with remote controls.
  • Remote Control(s): Wireless transmitters available in 1-button, 2-button, or 4-button configurations to control the receiver.

Product Demonstration Video:

Video 1: Demonstration of the Wenqia Smart Switch pairing and operation.

3. Specifications

Feature Specification
Brand NameWenQia
Model NumberWQ699
MaterialPlastic
Switch TypeRemote Control (Push Button)
Is Smart DeviceNo
OriginMainland China
CertificationCE
Input VoltageAC 85V-250V
Output VoltageAC 85V-250V
Max Load Current10A
Quiescent Current<5mA
RF Frequency433MHz
Working Temperature-30°C ~ +80°C
Receiving Sensitivity>97dbm
Remote DistanceUp to 50m (theoretical open space)
Amount of Storage Remote Controls20 pieces
Support Encoding1527 Learning Code
RF Operating ModeASK Superheterodyne Wireless Reception
Remote Operating ModesMomentary / Toggle / Latched Mode
Transmitter Battery27A 12V (Included)
Receiver Dimensions72mm x 35mm x 20mm
Remote Dimensions110mm x 38.1mm x 15mm
Remote Weight40.8g
Smart Switch Receiver dimensions and learning button

Figure 2: Receiver dimensions and location of the learning button.

Remote control dimensions and battery type

Figure 3: Remote control dimensions and battery type (23A 12V).

4. Setup and Installation

Before installation, ensure the power supply is OFF. Slightly stretch the antenna on the receiver for better signal reception.

Wiring Diagram:

Connect the receiver according to the following diagrams. The receiver has clearly marked input (AC L, N) and output (L, N) terminals.

Wiring diagram for connecting the smart switch receiver to a single light

Figure 4: Basic wiring diagram for controlling a single light with the receiver. Input AC 85V-250V, Maxload 10A.

Multiple Control Combinations:

The system supports various configurations, such as multiple switches controlling one light or one switch controlling several lights, and can operate effectively up to 50 meters in open space.

Diagram showing multiple switches controlling one light and one switch controlling multiple lights, with a 50m range illustration

Figure 5: Examples of multiple control combinations and the effective range through walls.

5. Operating Modes and Pairing

The receiver supports three operating modes: Toggle, Momentary, and Latched. You must clear any previous pairings before changing the operating mode.

5.1. Clear Signal Match (Reset)

To clear all paired remote controls from the receiver:

  1. Press the learning button on the receiver 8 times.
  2. All previously paired remote controls will be cleared.

Note: After clearing the signal match, all remote controls will no longer work until re-paired.

5.2. Toggle Mode (Self-locking)

In Toggle mode, pressing a button on the remote turns the relay ON, and pressing the same button again turns it OFF.

Pairing Steps:

  1. Press the learning button on the receiver 2 times.
  2. Wait for 3 seconds.
  3. Press one button on the remote control.
  4. The pairing is successful.

Operation:

  • Press button "A" (or the paired button), the relay will turn ON.
  • Press button "A" again, the relay will turn OFF.

5.3. Momentary Mode (Non-locking)

In Momentary mode, the relay turns ON only while the remote control button is pressed and held. It turns OFF when the button is released.

Pairing Steps:

  1. Press the learning button on the receiver 4 times.
  2. Wait for 3 seconds.
  3. Press one button on the remote control.
  4. The pairing is successful.

Operation:

  • Press and hold one button, the relay will turn ON.
  • Release the button, the relay will turn OFF.

5.4. Latched Mode (Interlocking)

In Latched mode, one button turns the relay ON, and another button turns it OFF. This mode typically requires a remote with at least two buttons (e.g., A and B).

Pairing Steps:

  1. Press the learning button on the receiver 3 times.
  2. Wait for 3 seconds.
  3. Press button "A" on the remote control.
  4. Wait for 3 seconds.
  5. Press button "B" on the remote control.
  6. The pairing is successful.

Operation:

  • Press button "A", the relay will turn ON.
  • Press button "B", the relay will turn OFF.

5.5. Memory Mode

The receiver retains its last ON/OFF state even after a power cut. When power is restored, the wireless receiver will return to the state it was in before the power interruption.

Pairing Steps:

  1. Press the learning button on the receiver 6 times.
  2. The pairing is successful.

6. User Tips

  • The device is generally easy to set up and install, making it suitable for various applications.
  • Users have reported excellent range, often exceeding expectations, even through obstacles.
  • Consider your specific needs for the number of control buttons on the remote. If you anticipate controlling multiple devices or using latched mode, a 2-button or 4-button remote might be more suitable than a 1-button remote.
  • The switch works well for controlling lights in areas like pools, gardens, and general indoor lighting.

7. Troubleshooting

  • Remote controls not working after changing mode: Always perform a "Clear Signal Match" (Section 5.1) before attempting to change the operating mode of the remote control.
  • Remote controls stop working: If the remote controls suddenly stop functioning, ensure the battery voltage is not low. Replace the 27A 12V battery in the remote control if necessary.
  • Poor signal reception: Slightly stretch the antenna on the receiver to improve signal strength and range.

8. Maintenance

  • Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Battery Replacement: When the remote control's range decreases or it becomes unresponsive, replace the 27A 12V battery.
  • Environmental Conditions: Ensure the device is used within its specified working temperature range (-30°C to +80°C) and kept away from excessive moisture.

9. Warranty and Support

Warranty:

This product comes with a 2-year warranty from the date of purchase.

Customer Support:

If you have any questions or encounter problems with the product, please contact us using the information below. We are committed to resolving your issues.

  • Address: T27-51, Huicheng District, Huizhou City, Guangdong Province, China 516000
  • WhatsApp: +86 15766861142
  • Email: 634552555@qq.com

A detailed user manual in PDF format is also available for download: User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.