1. Introduction
Thank you for choosing the Herdio 6.5 Inch Bluetooth Ceiling Speaker System. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new speakers. Please read this manual thoroughly before use and retain it for future reference.
2. Package Contents
Ensure all items listed below are present in your package. If any items are missing or damaged, please contact customer support.
- Speakers (x2)
- Product Manual (x1)
- 5M Speaker Cable (x2)
- Amplifier Box (x1)
- Power Adapter (x1)

3. Safety Information (FCC Requirement)
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
4. Setup (Installation Guide)
This guide applies to models HCS418, HCS418BT, HCS528, HCS528BT, HCS818, and HCS818BT.
4.1. Prepare the Mounting Area

- Cut the drywall: Carefully cut a hole in the drywall at your desired speaker location.
- Note: Always allow at least one-half inch (1.27 cm) between a wall stud and the speaker cutout, or the locking tabs will not be able to swivel into place.
4.2. Speaker Dimensions

- Speaker Grill Diameter: 6.30 inches (16 cm)
- Total Speaker Diameter: 7.5 inches (19 cm)
- Mounting Depth: 3.15 inches (8 cm)
4.3. Connect Speaker Wires
Connect the speaker wires from the amplifier to the speaker terminals. Ensure correct polarity (positive to positive, negative to negative).

4.4. Secure the Speaker
- Screw down each of the four Phillips head screws on the speaker frame. The locking tabs will swivel into place and secure the unit to the rear surface of the drywall.
- Insert the strips of adhesive to further secure the grille.
4.5. Install the Grille
Replace the metal grille onto the speaker. The grille is paintable for customization.

5. Operating (Bluetooth Operations)
Follow these steps to connect your device via Bluetooth:

- Make sure that the power supply is connected to the amplifier box and the blue LED on the amplifier is flashing. This indicates it is in pairing mode.
- Turn on your mobile device or other Bluetooth-enabled device.
- Scan for Bluetooth devices and select the device named "Herdio" from the list.
- When you hear a confirmation tone, the blue LED on the amplifier will turn solid, indicating that the connection is successful.
6. User Tips
- Many users report excellent sound quality, making these speakers suitable for various home audio needs.
- The included amplifier is designed to connect two speakers. If you wish to expand your system, consider additional amplifier units or a different setup.
- Ensure proper wire connections and secure mounting for optimal sound performance and safety.
7. Specifications
7.1. General Features
- Built-in 2 Channel Amplifier
- 3.5mm Auxiliary Input
- Bluetooth 5.0 Wireless Music Streaming
- Waterproof: Yes
- Support APP: Yes
- Inbox adaptor: Yes
- Support Apt-x: Yes
- Active Noise-Cancellation: Active
- Sound Mode: Stereo Sound Mode
- Audio Crossover: Full-Range
- Number of Loudspeaker Enclosure: 2
- Cabinet Material: Plastic
- Sabwoofer cabinet material: Metal
- Woofer/Widerange material: Other
- Mid-range material: Metal
- Tweeter material: Metal
- Material: Metal
- Use: Home
- Installation type: Ceiling Mount, Floor Mount, Wall Mount
- Certification: CE
7.2. Technical Specifications
| Model No. | Speaker Size | Bluetooth Function | Max Power Output | Sensitivity | Impedance | Frequency Range | Cut-Out Diameter |
|---|---|---|---|---|---|---|---|
| HCS418 | 4 inch | NO | 80W | 89dB | 8 Ohms | 60-20KHz | 5.7 Inch (14.5 CM) |
| HCS528 | 5.25 inch | NO | 150W | 89dB | 8 Ohms | 60-20KHz | 7.3 Inch (18.5 CM) |
| HCS818 | 6.5 inch | NO | 160W | 89dB | 8 Ohms | 50-20KHz | 8 Inch (20.5 CM) |
| HCS418BT | 4 inch | YES | 80W | 89dB | 8 Ohms | 60-20KHz | 5.7 Inch (14.5 CM) |
| HCS528BT | 5.25 inch | YES | 150W | 89dB | 8 Ohms | 60-20KHz | 7.3 Inch (18.5 CM) |
| HCS818BT | 6.5 inch | YES | 160W | 89dB | 8 Ohms | 50-20KHz | 8 Inch (20.5 CM) |
7.3. Other Specifications
- Voltage range: USB (5-20V DC)
- Weight: 2500g
- Product Dimensions: 3.15"D x 7.5"W x 7.5"H
- Maximum wireless range: 10m-20m
- Number of devices connectable simultaneously: 2
- Input Power(W): 100-199 W
- Total Harmonic Distortion: 2%
- Output Voltage: 80 W
8. Troubleshooting
- No Power: Ensure the power adapter is securely connected to both the amplifier box and a working power outlet. Check if the power outlet is functional.
- No Sound: Verify that the speaker wires are correctly connected to both the amplifier and the speakers, observing proper polarity. Ensure the Bluetooth device is connected and playing audio. Check the volume levels on both the connected device and the amplifier.
- Bluetooth Connection Issues: Make sure the amplifier's blue LED is flashing, indicating it's in pairing mode. If already paired, ensure the device is within the 10-20m wireless range. Try unpairing and re-pairing the device.
- Distorted Sound: Reduce the volume on your connected device or the amplifier. Check for loose speaker wire connections. Ensure the speakers are not overloaded.
- Interference: If you experience radio or TV interference, try reorienting or relocating the receiving antenna, increasing the separation between equipment, or connecting the equipment to a different circuit.
9. Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker grilles and surfaces. Do not use harsh chemicals or abrasive cleaners.
- Environment: Avoid exposing the speakers to extreme temperatures, high humidity, or direct sunlight for prolonged periods.
- Handling: Handle the speakers with care during installation and maintenance to prevent damage to the cones or grilles.
10. Warranty & Support
All Herdio speaker products have a 1-year Limited Warranty against defects in materials and workmanship. Proof of purchase must accompany all claims. During the warranty period, Herdio will replace any defective part and correct any defect in workmanship without charge for either parts or labor. If you have questions or require support, you can contact us via email:
E-mail: support@herdiotech.com
For additional information, please visit: www.Herdiotech.com
You can also find the user manual in PDF format: User manual (PDF)
11. Frequently Asked Questions (FAQ)
- Q: Is this speaker system waterproof?
A: Yes, the speakers are designed to be waterproof. - Q: How many speakers are included in the package?
A: The package includes two speakers. - Q: What Bluetooth version does the amplifier use?
A: The amplifier uses Bluetooth Version 5.0. - Q: What is the maximum power output per speaker?
A: For the 6.5-inch models (HCS818/HCS818BT), the maximum power output is 160W per speaker. - Q: What is the impedance of the speakers?
A: The impedance for all models is 8 Ohms. - Q: Can I connect more than two speakers to the included amplifier?
A: The included amplifier is designed to connect two speakers. For additional speakers, you would need a separate amplifier or a different system configuration.