1. Introduction
This manual provides instructions for the SLMPLEFUN 433Mhz Wireless Remote Control Light Switch. This device allows you to wirelessly control various electrical appliances such as lamps, LED lights, and fans, offering convenience and flexibility in managing your home lighting and devices. The system consists of a compact receiver and a multi-function remote control transmitter.
2. Safety Information
Please read and understand all safety instructions before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Always ensure the power supply is OFF before performing any wiring or installation.
- The Live (L) and Neutral (N) lines cannot be reversed during wiring.
- When using wireless electronics, avoid placing them near metal objects, large electronic devices, electromagnetic fields, or other sources of strong interference.
- Replace the remote control battery promptly when its voltage is low to ensure strong signal transmission.
3. Product Overview
The SLMPLEFUN wireless control system features a compact receiver designed for easy integration and a versatile remote control. The receiver is designed to be 'Super Mini' for discreet installation.
4. Specifications
For detailed specifications, please refer to the table below. A comprehensive user manual in PDF format is also available for download: User manual (PDF)
| Feature | Specification |
|---|---|
| Model Number | 2201F+KT2010A |
| Working Voltage | AC 110V-250V 50/60 HZ |
| Max Current | 10A |
| Max Load | 2500W |
| Quiescent Current | less than 5mA |
| Operation Frequency | 433.92MHz (RF 433 MHz) |
| Working Temperature | -30~+80 Celsius |
| Receiving Sensitivity | more than -97dbm |
| Control Range | Up to 50m (theoretical distance) |
| Amount of Storage Remote Controls | About 15 pieces |
| Support Encoding | 1527 learning code |
| RF Operating Mode | ASK superheterodyne wireless reception |
| Remote Operating Mode | Momentary/Toggle/Latched Mode |
| Channel | 1 |
| Use | Lighting |
| Receiver Size | 47*28*22mm/1.85*1.1*0.87inch |
| Receiver Shell | YES |
| Controller Terminal | L/N |
| 4-in-1 Transmitter Size | 38*110*15 mm |
| 4-in-1 Transmitter Battery | 23A 12V (Included) |
| 4-in-1 Transmitter Feature | ALL ON/ALLOFF |
| Application Scenario | Fan, Fish tank, Light, LED, Lamps, Electric kettle, Coffee machine |
5. Setup and Installation
5.1 Wiring Diagram
Ensure power is off before wiring. The input and output terminals cannot be reversed.
For more complex wiring scenarios, refer to the detailed diagrams in the full manual:
5.2 Pairing Instructions
To pair the remote control with the receiver:
- Click the learning button on the receiver 2 times. The indicator LED on the receiver will light up.
- Then, click any button on the wireless remote control (transmitter). The indicator on the receiver will flash several times and then turn off, indicating successful pairing.
If you have multiple wireless switches, you will need to configure each one individually following these steps.
5.3 Resetting Paired Devices
To clear all paired remote controls from the receiver:
- Click the learning button on the receiver 8 times.
- After the reset, all previously paired wireless switches will no longer be able to control this receiver.
5.4 Remote Control Placement
The wireless remote control offers flexible placement options due to its stable signal and lack of wiring requirements.
6. Operating Instructions
The remote control allows for individual control of connected devices and a master ON/OFF function.
- Individual Control: Use buttons 1 ON/OFF, 2 ON/OFF, 3 ON/OFF, 4 ON/OFF to control specific channels (receivers) individually.
- Master Control: Use the 'ALL ON' button to turn on all paired devices simultaneously, and the 'ALL OFF' button to turn off all paired devices simultaneously.
The system is compatible with various types of lighting and fans:
7. Maintenance
The primary maintenance task is to ensure the remote control's battery is adequately charged. The 4-in-1 transmitter uses a 23A 12V battery.
- Replace the battery in time when the wireless switch voltage is low to maintain optimal performance and signal strength.
8. Troubleshooting
If the receiver and transmitter are not operating normally, try the following steps:
- Check Battery Power: Verify if the remote control's battery power is depleted. The indicator LED on the wireless switch may not light up or appear dimly lit if the battery is low.
- Verify Wiring: Ensure your receiver is wired correctly. It is crucial that the wiring connections are accurate as per the diagrams in Section 5.1.
- Reprogram Devices: Reprogram the receiver and wireless switch by following the pairing instructions in Section 5.2. This often resolves many operational issues.
- Interference Check: Ensure there are no strong interference sources (metal objects, large electronics, electromagnetic fields) near the wireless devices.
If the problem persists after attempting these steps, please contact customer support.
9. User Tips
- Signal Range: The remote control offers a significant range of up to 50 meters, even through multiple walls or doors, allowing for flexible control from various locations within your home.
- Individual Control: Utilize the individual ON/OFF buttons for precise control over specific lights or appliances, which is particularly useful for multi-light setups or bathroom ventilation.
- Master Control: The 'ALL ON' and 'ALL OFF' buttons provide convenient master control for quickly managing all connected devices. If these buttons don't respond on the first press, try pressing them again.
- Discreet Installation: The 'Super Mini' receiver can be easily concealed in junction boxes or behind fixtures for a clean installation.
10. Warranty and Support
If you encounter any issues that cannot be resolved using the troubleshooting guide, please contact our customer service team. We are committed to providing the best possible support.
- Email: dieseelectronici@163.com
- WhatsApp: +86 13502278583
Manufacturer: Shenzhen Huafangyuan Electronics Co., Ltd.
Address: 9.No.2, Fukang Road, Building 36, Fumin Industrial Zone, Pinghu Town, Shenzhen
Brand Owner: Huizhou Wenqiao Electronic Technology Co., Ltd.
Address: Room 03, 12th Floor, Building T19, East Coast Garden, Fangzhilonghuwan, No. 27, Sanhuan South Road, Huicheng District, Huizhou City, Guangdong Province, China 516001
11. Compliance and Certifications
This product complies with relevant international standards and directives.
- Certifications: RoHS, CE
- EU Rules: This device is compatible with Directive 2014/53 EU Rules.