Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your WESA Mirror Acrylic Wall Rocker Switch, Model YKL-BAI-02. Please read this manual thoroughly before use and retain it for future reference.
Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
For additional guidance, a user manual PDF is available: View User Manual (PDF)
Specifications
| Attribute | Value |
|---|---|
| Brand Name | WESA |
| Model Number | YKL-BAI-02 |
| Item Type | SWITCHES |
| Switch Type | Push Button Switch |
| Current | 16A |
| EU LVD Voltage | Below 50Vac or 75Vdc |
| Material | Acrylic, flame retardant ABS, silver plated |
| Panel Material | Acrylic, flame retardant ABS, silver plated |
| Copper Material | Superior phosphorous copper |
| Contact Material | Composite silver dot |
| Certification | RoHS, LVD, CE |
| Is Smart Device | No |
| Origin | Mainland China |
| Warranty | 10 years |
Package Contents
The package typically includes the WESA Wall Rocker Switch. Please verify all components upon receipt.
Package Dimensions and Weight:
- Length: 10 cm
- Width: 9 cm
- Height: 5 cm
- Weight: 0.084 kg
Installation Instructions
Professional installation is recommended for electrical devices. Always ensure power is disconnected before beginning any electrical work.
- Turn off the main switch: Before starting any installation, ensure the main power supply to the circuit is completely turned off to prevent electric shock. Verify the circuit is in a power-off state.
-
Identify Wires:
- N: Zero wire (Neutral)
- L: Live wire (Phase)
- E: Ground wire (Earth)
-
Connect Wires: Connect the wires according to the standard electrical practices and the diagram below. Ensure all connections are secure.
Figure 3: Back of WESA Wall Switch showing wiring terminals. Connect N (Neutral), L (Live), and E (Ground) wires to their respective terminals. As per the manual's wiring schematic, 'N' is the zero wire (Neutral), 'L' is the live wire (Phase), and 'E' is the ground wire. Please connect these wires to the corresponding terminals on the switch.
- Mount the Switch: Secure the switch into the wall box.
- Restore Power: Once installation is complete and all connections are checked, restore power at the main switch.
Operation
The WESA Wall Rocker Switch operates as a standard on/off switch. Press the top or bottom of the rocker panel to toggle the connected light or appliance between on and off states.
Maintenance
Cleaning:
The acrylic panel is designed for easy cleaning. Wipe the surface with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
Storage:
If the device needs to be stored, turn off the power supply to the circuit it controls. Store the device in a dry place, away from moisture and out of reach of children.
User Tips
- Users have noted the product's sturdy construction and excellent quality, suggesting it is a reliable choice for long-term use.
- The acrylic panel is easy to clean, helping to maintain its aesthetic appeal over time.
Troubleshooting
If you encounter issues with your WESA Wall Rocker Switch, consider the following common troubleshooting steps:
- No Power: Ensure the main circuit breaker is on. Check all wiring connections for looseness or incorrect placement.
- Intermittent Operation: Verify that all wire connections are secure and that there are no frayed wires.
- Switch Not Responding: If the switch does not respond, ensure it is correctly installed and receiving power. If the issue persists, the switch may be faulty and require replacement.
Always disconnect power before inspecting or attempting to fix electrical components.
Warranty and Support
Warranty:
This product comes with a 10-year warranty.
Manufacturer Information:
- Company Name: Wenzhou Junyuan Technology Co., Ltd
- Address: No. 1, Yantai Village, Shacheng Street, Wenzhou Economic and Technological Development Zone, Zhejiang Province, China
- Email: 714637372@qq.com
- Phone: 13587405319
EU Authorized Representative:
- Company Name: MJCM SARL
- Address: 78 Avenue des Champs-Elysees, Bureau 326
- Email: mjcm190928@gmail.com
- Tel: +33 767213611 or 780753377