1. Introduction
Thank you for choosing the RMshebei Tuya Smart WiFi Circuit Breaker 2P63A. This intelligent device provides comprehensive electrical protection including over-voltage, under-voltage, overload, and leakage protection, along with bidirectional metering capabilities. It integrates seamlessly with your smart home ecosystem, offering remote control and monitoring via the Tuya Smart or Smart Life app, and voice control through Google Assistant and Amazon Alexa.
2. Safety Information
WARNING: Electrical installation should only be performed by qualified personnel. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always disconnect the main power supply before installing or servicing the device.
- Do not operate the device with wet hands or in damp conditions.
- Ensure all wiring connections are secure and correctly polarized.
- Verify that the device's specifications (voltage, current) match your electrical system requirements.
- This device is designed for indoor use only.
3. Product Features
- Remote Control: Manage power ON/OFF from anywhere via the Smart Life/Tuya Smart app.
- Voice Control: Compatible with Google Assistant and Amazon Alexa for hands-free operation.
- Electricity Metering: Real-time monitoring and historical data for current, voltage, power, and kWh consumption (daily, monthly, yearly reports).
- Bidirectional Metering: Includes PV metering to track electricity input from photovoltaic generation to the grid.
- Over/Under Voltage Protection: Automatically disconnects power when voltage exceeds or drops below set thresholds.
- Overload Protection: Protects circuits from excessive current draw.
- Residual Current (Leakage) Protection: Detects and trips on leakage currents to prevent electric shock.
- Over/Lost Current Protection: Comprehensive current monitoring.
- Dual Relay Disconnect: Simultaneous Live (L) and Neutral (N) cut-off for enhanced safety.
- Adjustable Protections: Customizable thresholds for leakage, high temperature, over-current, over-voltage, and under-voltage alarms.
- Smart Multi-Timing Current Limit Protection: Adjustable current limits (1-63A) with up to 15 programmable time slots for enhanced safety and efficiency.
- Auto-Shift Current by Timeframe: Program current adjustments based on time schedules.
- Backlight Display: Clear LCD display for local readings.

Figure 1: Product overview highlighting key features and smart home compatibility.
4. Specifications
| Parameter | Value |
|---|---|
| Model Number | WTDZW-63A/N2 |
| Rated Voltage | AC110/230V |
| Operating Voltage | AC80V-300V (single phase) |
| Working Frequency | 50/60Hz |
| Rated Current | 63A |
| Installation | 35MM Guide Rail (DIN Rail) |
| Electrical Life | 104 operations |
| Mechanical Life | 104 operations |
| Protection Level | IP20 |
| Pollution Level | 3 |
| Altitude | <2000m |
| Working Humidity | ≤50% at 40°C (no condensation) |
| Data Sync Time | Up to 20 seconds (network speed dependent) |
| Measurement Error | 1% |
| >U and <U Trip Delays | 0.5s |
| Reset/Start Delay | 10s-99s |
| Voltage Measurement Accuracy | 1% (not exceeding 1% of total range) |
| Rated Insulation Voltage | 400V |
| Output Contact | 2NO |
| EU LVD Voltage | Below 50Vac or 75Vdc |
| High-Concerned Chemical | None |
| Certification | CE, FCC, RoHS |
5. Setup
5.1. Electrical Installation (Wiring)
Before proceeding, ensure the main power supply is OFF.
- Mount the circuit breaker onto a standard 35mm DIN rail in your electrical panel.
- Identify the Live (L) and Neutral (N) input and output terminals on the device.
- Connect the incoming Live (L) wire to the input 'L' terminal and the incoming Neutral (N) wire to the input 'N' terminal.
- Connect the outgoing Live (L) wire to the output 'L' terminal and the outgoing Neutral (N) wire to the output 'N' terminal for the load.
- Ensure all wire connections are tight and secure to prevent loose contacts and overheating.
- Verify correct polarity for all connections.

Figure 2: Product dimensions and basic 2-pole wiring diagram.

Figure 3: Internal view showing Dual Relay Disconnect for simultaneous L/N cut-off.
5.2. App Installation and Device Pairing
- Download the App: Use your smartphone to scan the QR codes for