Domars HW33D-2

Contents

Domars Shared Power Bank Combo User Manual

Model: HW33D-2

1. Safety Warnings

Warning:

  • Disconnect the power bank immediately after it is fully charged. Prolonged storage at full charge will shorten its lifespan.
  • Regularly check the power bank's condition. If you notice bulging, abnormal heat, or it not charging, stop using it immediately.

2. Features

The Domars Shared Power Bank Combo offers a versatile and efficient charging solution with the following features:

  • Suitable for nearly all kinds of mobile phones and digital products which have USB cable connector.
  • Supports charging for iPhone, iPod, MP3, MP4, PSP, Cell phones, Bluetooth devices, and some tablet PCs.
  • Equipped with a precise IC protector to safely avoid over-charging, over-discharging, and short circuit.
  • Intelligent power management solution, soft switch button, steady and high efficiency.
  • Magnetic Wireless Charging capability.
  • Includes 2 individual power banks.
  • Plug-in Charging for convenience.
  • Built-in 2 Cables for various device compatibility.
  • 22.5W Super Fast Charging for quick power delivery.
  • LED Digital Display for real-time power status.
Four panels showing Domars power bank features: LED display, lightweight, fast charging, and non-heating design.
Key features of the Domars Power Bank, including LED display, lightweight design, fast charging, and non-heating operation.
Comparison of Domars power bank features against generic 'Others', highlighting 22.5W flash fast charging, 200g lightweight design, combination sharing, and stable non-heating performance.
Domars Power Bank advantages: 22.5W flash fast charging, 200g lightweight, combination sharing, and stable non-heating.

3. Specifications

Property Value Property Value
Product Name Power Bank Combo Pogo Pin Input DC 5V=2A/9V=2A/12V=1.5A
Product Model HW33D-2 USB-C Input DC 5V=3A/9V=2A/12V=1.5A
Capacity 10000mAh*2 USB-C Output DC 5V=3A/9V=2.2A/12V=1.67A/10V=2.25A
Power Bank Size 90*63.3*27.5mm USB-C Cable Output DC 5V=3A/9V=2.2A/12V=1.67A/10V=2.25A
Base Size 117*87*43mm Lightning Cable Output DC 5V=2.4A/9V=2.2A
Product Weight 513g (Power Bank + Base) Base USB-C Input DC 5V=3A/9V=3A/12V=3A
Wireless Charging 5W/7.5W/10W/15W Base Pogo Pin Output DC 5V=2A/9V=2A/12V=1.5A
A single Domars power bank held in hand, highlighting its 10000mAh capacity, 200g weight, 87x56x27mm dimensions, and charging capabilities for various devices.
Physical specifications and charging capacity for common devices.

4. Setup

4.1 Charging the Base

Connect the charging base to a power source using a compatible USB-C cable and adapter. The base supports DC 5V=3A/9V=3A/12V=3A input via its USB-C port.

Base Indicator:

  • A blue breathing light indicates the charger is currently charging.
  • A steady green light indicates the charger is fully charged.
Domars Shared Power Bank system with 5 individual power banks in a charging base, showing a phone with a power bank attached.
The Domars Shared Power Bank system with multiple power banks in its charging base.

4.2 Charging Individual Power Banks

Place the individual Domars power banks into the charging slots on the base. They will automatically begin charging via the Pogo Pin connection. The base provides DC 5V=2A/9V=2A/12V=1.5A output via its Pogo Pins.

5. Operating Instructions

5.1 Displaying Power Status

To check the real-time power status of an individual power bank, lightly press the control button once. The LED screen on the power bank will display the percentage of remaining power. The output will automatically turn off once the power is used up.

5.2 Charging Other Devices

The Domars power banks offer multiple ways to charge your devices:

  1. Using Built-in Cables: Each power bank has built-in cables. Take out the appropriate built-in cable (USB-C or Lightning) and insert it into the corresponding port of the device you wish to charge. The power bank will automatically recognize and begin charging the device.
  2. Using External Cables: You can use your own C-to-C or C-to-Lightning cable with the power bank's USB-C output port to charge compatible devices.
  3. Wireless Charging: For devices that support wireless charging, place the device at the position of the wireless charging output circle on the power bank. The power bank will automatically recognize and initiate wireless charging.
Illustration of fast charging with a PD 20W/22.5W Super Fast Charging Cable, showing an iPhone charging to 80% in 45 minutes.
Fast charging capabilities using the included PD 20W/22.5W cable.
A user working on a laptop with a Domars Combo Pack Power Bank base and two power banks, illustrating multiple family kits, plug and play, grab and go, wireless charging, built-in cable, and airplane friendly features.
The Domars Combo Pack Power Bank in use, demonstrating its versatility for various charging needs.

6. Product Illustration

The diagram below illustrates the various components and ports of the Domars Power Bank and its Base. For a detailed visual reference, please consult the official user manual PDF.

Power Bank Components:

  1. ON/OFF Button
  2. LED Power Display
  3. USB-C Input / USB-C Output
  4. Wireless Charging Area
  5. USB-C Cable Output
  6. Lightning Cable Output
  7. Pogo Pin Input

Base Components:

  1. LED Display
  2. Pogo Pin Output
  3. USB-C Input

For the complete diagram, please refer to the official user manual PDF: Domars Power Bank User Manual (PDF)

7. Maintenance

  • Keep the power bank and base clean and dry. Avoid exposure to extreme temperatures, direct sunlight, and humid environments.
  • Do not disassemble, modify, or attempt to repair the device yourself. This may void the warranty and cause damage.
  • Use only original or certified compatible charging cables and adapters.
  • Store the power bank in a cool, dry place when not in use. For long-term storage, it is recommended to keep the battery at approximately 50-70% charge.

8. Troubleshooting

  • Power bank not charging: Ensure the charging base is properly connected to a power source and the power banks are correctly seated in the base. Check the base indicator light. If an individual power bank is not charging, ensure its pogo pins are clean and making good contact.
  • Device not charging from power bank: Ensure the power bank has sufficient charge. Press the control button to activate the power display. Check that the built-in cable or external cable is securely connected to both the power bank and the device. For wireless charging, ensure the device is correctly aligned on the wireless charging area.
  • Power bank overheating or bulging: Immediately stop using the power bank and disconnect it from any devices or power sources. Do not attempt to use it again. Contact customer support.
  • LED display not working: Lightly press the control button. If it still doesn't display, the power bank might be fully discharged or have an internal issue.

9. User Tips

  • For optimal battery life, avoid completely draining the power bank frequently.
  • When traveling, ensure the power banks are adequately charged for your needs. The 200g lightweight design makes them travel-friendly.
  • Utilize the combination sharing feature to charge multiple devices or share power with others efficiently.

10. Support and Warranty

For any product inquiries, technical support, or warranty claims, please contact Domars customer service through your purchase platform or the official Domars website.

Please retain your proof of purchase for warranty purposes.

© 2023 Domars. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.