1. Introduction
Thank you for choosing the Domars Magnetic Power Bank Set. This product features two 10000mAh power banks with a dedicated charging base, offering versatile charging solutions including magnetic wireless charging, built-in cables, and super-fast wired charging. This manual provides essential information for safe operation, setup, and maintenance of your device.
2. Important Safety Information
Warning:
- Disconnect the power bank immediately after it is fully charged. Prolonged storage at full charge will shorten its lifespan.
- Regularly check the power bank's condition. If you notice bulging, abnormal heat, or it not charging, stop using it immediately.
- Do not disassemble, modify, or repair the device yourself.
- Keep away from water, fire, and extreme temperatures.
- Avoid dropping or subjecting the device to strong impacts.
- Keep out of reach of children.
3. Package Contents
Please check the package for the following items:
- 2 x Domars 10000mAh Power Banks (with built-in USB-C and Lightning cables)
- 1 x Charging Base
- 1 x USB-C to USB-C Charging Cable (for base)
- User Manual (this document, also available as PDF)
4. Product Features
- Universal Compatibility: Suitable for nearly all kinds of mobile phones and digital products with USB cable connectors.
- Advanced Protection: Equipped with a precise IC protector to safely avoid over-charging, over-discharging, and short circuits.
- Efficient Power Management: Intelligent power management solution, soft switch button, steady and high efficiency.
- Versatile Charging: Magnetic Wireless Charging (5W/7.5W/10W/15W), Plug-in Charging, and Built-in USB-C and Lightning Cables.
- Super Fast Charging: Supports up to 22.5W Super Fast Charging.
- Digital Display: LED Digital Display for real-time power readout.
- Compact and Portable: Lightweight design for easy carrying.

Image: Compact design and charging capabilities of the Domars Power Bank.

Image: Super fast charging with built-in cable.
5. Product Overview and Components
Familiarize yourself with the different parts of your Domars Power Bank Set:

Image: Product illustration from the user manual.
Power Bank Components:
- ON/OFF Button
- LED Power Display
- USB-C Input / USB-C Output Port
- Wireless Charging Output Circle
- USB-C Cable Output
- Lightning Cable Output
- Pogo Pin Input (for base charging)
Charging Base Components:
- LED Display (Base Indicator)
- Pogo Pin Output (for charging power banks)
- USB-C Input (for base power supply)
6. Setup
- Powering the Charging Base: Connect the provided USB-C cable to the USB-C Input port (10) on the charging base and plug the other end into a suitable USB power adapter (not included).
- Placing Power Banks: Gently place the Domars Power Banks onto the charging base, aligning the Pogo Pin Input (7) on the power bank with the Pogo Pin Output (9) on the base. The power banks will automatically begin charging.
7. Operating Instructions
7.1. Charging the Power Banks
Place the power banks onto the powered charging base. The base indicator (8) will show the charging status:
- Blue breathing light: The power bank(s) are currently charging.
- Green steady light: The power bank(s) are fully charged.
7.2. Charging Other Devices
Your Domars Power Bank offers multiple ways to charge your devices:
- Using Built-in Cables: Take out the built-in USB-C cable (5) or Lightning cable (6) from the power bank and insert it into the corresponding port of the device that needs to be charged. The power bank will automatically recognize and begin charging the device.
- Using USB-C Port: Connect your device's charging cable to the USB-C Input / USB-C Output port (3) on the power bank.
- Wireless Charging: Place your device (that supports wireless charging) at the position of the wireless charging output circle (4) on the power bank. The power bank will automatically recognize and begin wireless charging.
7.3. Checking Power Level
For your convenience in understanding the real-time power status of the power bank, lightly press the ON/OFF control button (1) once. The LED Power Display (2) on the power bank will show the percentage of remaining power. After the power is used up, the output will automatically turn off.
8. Maintenance
- Clean the power bank and charging base with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- If not used for a long period, charge the power banks at least once every three months to maintain battery health.
- Avoid exposing the device to moisture or liquids.
9. Troubleshooting
- Power bank not charging: Ensure the charging base is properly connected to a power source. Check if the power banks are correctly seated on the base, ensuring the pogo pins make contact.
- Device not charging from power bank: Ensure the power bank has sufficient charge. Check cable connections. For wireless charging, ensure your device supports it and is correctly positioned on the wireless charging area.
- Slow charging: Ensure you are using appropriate cables and power adapters. Some devices may have specific charging requirements.
- Overheating: It is normal for the device to get slightly warm during charging or discharging. If it becomes excessively hot, stop using it immediately and contact customer support.
- LED display not working: Try pressing the ON/OFF button. If it still doesn't light up, the power bank might be fully discharged or there could be an issue.
10. Specifications
| Feature | Specification |
|---|---|
| Product Name | Power Bank Combo |
| Product Model | HW33D-2 |
| Capacity | 10000mAh * 2 |
| Power Bank Size | 90 * 63.3 * 27.5mm |
| Base Size | 117 * 87 * 43mm |
| Product Weight | 513g (Power Bank + Base) |
| Wireless Charging | 5W / 7.5W / 10W / 15W |
| Pogo Pin Input (Power Bank) | DC 5V=2A / 9V=2A / 12V=1.5A |
| USB-C Input (Power Bank) | DC 5V=3A / 9V=2A / 12V=1.5A |
| USB-C Output (Power Bank) | DC 5V=3A / 9V=2.2A / 12V=1.67A / 10V=2.25A |
| USB-C Cable Output (Power Bank) | DC 5V=3A / 9V=2.2A / 12V=1.67A / 10V=2.25A |
| Lightning Cable Output (Power Bank) | DC 5V=2.4A / 9V=2.2A |
| Base USB-C Input | DC 5V=3A / 9V=3A / 12V=3A |
| Base Pogo Pin Output | DC 5V=2A / 9V=2A / 12V=1.5A |
11. User Tips
No specific user tips from reviews or Q&A are available at this time. Always refer to the safety guidelines and operating instructions for optimal performance.
12. Warranty and Support
For any warranty claims, technical support, or product inquiries, please contact the seller or retailer from whom you purchased this product. Please retain your proof of purchase for warranty service.
A detailed user manual in PDF format is available for download here.