1. Introduction
Thank you for choosing the Attack Shark X3 Wireless Gaming Mouse. This high-performance mouse is designed for gamers and professionals, offering a lightweight design, advanced PixArt PAW3395 sensor, and versatile tri-mode connectivity. This manual will guide you through the setup, operation, and maintenance of your new device.
2. Package Contents
Please check the box for the following items:
- Attack Shark X3 Wireless Gaming Mouse
- USB Receiver (2.4G)
- Type-C Charging Cable
- User Manual (this document)
3. Specifications
| Feature | Description |
|---|---|
| Model | X3 |
| Sensor Model | Pixart 3395 |
| DPI | 800-26000 (6-level adjustment) |
| Tracking Speed (IPS) | 650 |
| Acceleration | 50 G |
| Polling Rate | 125Hz, 250Hz, 500Hz, 1000Hz |
| Connectivity | Tri-Mode (Wired, 2.4G Wireless, Bluetooth 5.2) |
| Switches | Kailh Black Mamba (80 Million Cycles Life) |
| Battery Life | Approx. 65 hours (continuous working) |
| Weight | 49 ± 3g |
| Power Type | Rechargeable (Type-C) |
| Certification | CE, RoHS |
4. Setup
4.1 Charging the Mouse
Before first use, it is recommended to fully charge the mouse. Connect the provided Type-C charging cable to the mouse's front port and the other end to a USB power source (e.g., computer USB port, USB wall adapter). The DPI indicator light will show charging status.
4.2 Connecting the Mouse
The Attack Shark X3 supports three connection modes: 2.4G Wireless, Bluetooth 5.2, and Wired (Type-C). Use the switch on the bottom of the mouse to select your desired mode.
4.2.1 2.4G Wireless Mode
- Locate the USB receiver inside the mouse (usually in a compartment on the bottom).
- Plug the USB receiver into an available USB port on your computer.
- Slide the switch on the bottom of the mouse to the "2.4G" position.
- The mouse should connect automatically.
4.2.2 Bluetooth Mode
- Slide the switch on the bottom of the mouse to the "BT" position.
- The mouse will enter pairing mode (the mode indicator light may flash).
- On your computer or device, go to Bluetooth settings and search for new devices.
- Select "Attack Shark X3" (or similar name) from the list to pair.
- The mouse can connect to two separate devices via Bluetooth/2.4G, allowing you to switch between them.
4.2.3 Wired Mode
- Connect the Type-C charging cable to the mouse and the other end to your computer's USB port.
- The mouse will automatically switch to wired mode and begin charging.
4.3 DPI Adjustment
The mouse features a DPI adjustment button, typically located on the top or bottom of the mouse. Press this button to cycle through the preset DPI levels (800-26000). The DPI indicator light (on the bottom of the mouse) will change color to indicate the current DPI setting.
5. Operating Instructions
5.1 Basic Functions
The Attack Shark X3 mouse has standard buttons for left-click, right-click, middle button (scroll wheel click), forward, and backward. These are typically pre-configured for common use.
5.2 Advanced Customization (Software)
For advanced customization, including button remapping, macro programming, and precise DPI/polling rate adjustments, please download the official Attack Shark software from the manufacturer's website. The software allows you to:
- Assign custom functions to mouse buttons.
- Create and manage macros for complex command sequences.
- Adjust DPI settings in finer increments and set up multiple profiles.
- Change polling rate (125Hz, 250Hz, 500Hz, 1000Hz).
- Configure Lift Of Distance (LOD) to 1mm or 2mm.
- Monitor battery status.
Refer to the software's help section for detailed instructions on using its features.
5.3 Battery Management
The mouse features a long-lasting rechargeable battery, providing approximately 65 hours of continuous use. When the battery is low, the mouse's indicator light will signal a low power state. Connect the Type-C cable to recharge. The software can also display the current battery percentage.
6. Maintenance
6.1 Cleaning
To maintain optimal performance, regularly clean your mouse. Use a soft, dry cloth to wipe the surface. For stubborn dirt, a slightly damp cloth can be used, ensuring no moisture enters the internal components. Avoid harsh chemicals or abrasive materials.
6.2 Battery Care
To prolong battery life, avoid fully discharging the mouse frequently. Store the mouse in a cool, dry place when not in use for extended periods. Do not expose the mouse to extreme temperatures.
7. Troubleshooting
- Mouse not responding: Ensure the mouse is charged. Check the connection mode switch (2.4G/OFF/BT) on the bottom of the mouse. Re-pair Bluetooth or re-insert the 2.4G USB receiver. Try wired mode to confirm functionality.
- Lag or disconnection in wireless mode: Ensure the USB receiver is close to the mouse and not obstructed. Avoid interference from other wireless devices. Try a different USB port.
- DPI not changing: Ensure the mouse is powered on. Press the DPI button firmly. If using custom profiles, check software settings.
- Buttons not working: Check software settings for remapped buttons. If the issue persists, try resetting the mouse (refer to software or manufacturer support for reset procedures).
8. User Tips
- For competitive gaming, consider using the 2.4G wireless mode or wired mode for the lowest latency.
- Utilize the customization software to create different profiles for various games or applications, allowing quick switching of DPI, polling rate, and button assignments.
- Keep the mouse firmware updated through the official software for optimal performance and new features.
9. Frequently Asked Questions
- Q: How do I know the battery level?
- A: The mouse's indicator light will signal low battery. You can also check the precise battery percentage through the Attack Shark customization software.
- Q: Can I use the mouse while it's charging?
- A: Yes, the mouse can be used in wired mode while charging by connecting the Type-C cable to your computer.
- Q: Is the mouse compatible with Mac?
- A: The mouse supports Bluetooth connectivity, which is generally compatible with Mac devices. For full software customization, please check the manufacturer's website for Mac-specific software availability.
10. Safety Information
- Do not expose the mouse to water or excessive moisture.
- Avoid dropping or subjecting the mouse to strong impacts.
- Keep out of reach of children.
- Do not attempt to disassemble or modify the mouse, as this will void the warranty and may cause damage.
11. Regulatory Compliance
This device complies with CE and RoHS standards, ensuring it meets European safety, health, and environmental protection requirements.
For more detailed information, please refer to the official user manual PDF: Attack Shark X3 User Manual (PDF)
12. Product Video
Watch the official product video for a visual overview of the Attack Shark X3 Wireless Gaming Mouse's features and design.