JKGBL LED Ceiling Light

Contents

JKGBL LED Ceiling Light User Manual

Model: LED Ceiling Light

1. Product Information

The JKGBL LED Ceiling Light is designed for indoor spaces, providing efficient and versatile lighting. It features a durable wrought iron body, a light-diffusing panel, and an integrated LED light source module.

Key Features:

  • Light Colors: Available in Warm White, Neutral White, and Cool White.
  • Dimming Options: Choose between RC Infrared Remote Control or 2.4G Remote Control with memory function. The 2.4G remote control configuration is recommended for remote dimming. The remote is typically paired with the fixture before shipment.
  • APP Control: For 2.4G remote dimming models, download the mobile app to link and control the dimming of lighting fixtures.
  • Soft Light: Designed to provide soft light without flicker, high brightness without glare, and natural soft illumination.
Wood finish LED ceiling light
Wood finish LED ceiling light, showcasing its sleek design.
Diagram showing eye protection, high brightness without glare, and natural soft light features
Features: Eye protection, high brightness without glare, and natural soft light.

2. Safety Precautions

WARNING: Always turn off the main power supply before installation or maintenance. Verify that the circuit is de-energized to prevent electric shock.

  • Check the load-bearing capacity of the ceiling to ensure it can support the weight of the fixture (recommended ≥ 5kg).
  • If you are not familiar with electrical wiring, please consult a qualified electrician.
  • Do not use in humid, high-temperature (>45°C), or flammable and explosive environments.
  • Do not disassemble the internal components of the fixture to avoid circuit damage or safety hazards.

3. Installation Guide

3.1. Tools and Accessories

Required Tools: Electric drill, screwdriver, tape measure, insulating tape, wire stripper.

Included Accessories: Ceiling light body, expansion screws, self-tapping screws, wiring terminals, instruction manual.

3.2. Installation Steps

  1. Positioning and Drilling: Measure and mark the installation holes on the ceiling, aligning them with the base mounting holes of the light.

    Installation Guide Diagrams showing drilling and mounting steps
    Detailed installation diagrams for mounting the ceiling light.
  2. Drill holes at the marked positions using an electric drill (recommended Ø6x30mm for expansion screws) and insert the expansion screws.

  3. Fixing the Base: Thread the room's power cable through the fixture's inlet hole. Align the base with the expansion screws and securely tighten the self-tapping screws, ensuring the base is firmly attached to the ceiling.

  4. Wiring Connection: Connect the room's power cables to the corresponding wires on the light fixture:

    • **Live Wire (L):** Connect the room's live wire (typically red/brown) to the fixture's live wire terminal.
    • **Neutral Wire (N):** Connect the room's neutral wire (typically blue/black) to the fixture's neutral wire terminal.
    • **Ground Wire (PE):** Connect the room's ground wire (typically yellow/green) to the fixture's ground terminal.

    Secure all connections with wiring terminals and insulate them with insulating tape if necessary.

  5. Installing the Lampshade: Slightly bend the acrylic lampshade with both hands and insert it into the fixture.

  6. Power Test: Restore power and test if the light turns on normally. If the light does not turn on, check the wiring connections and power supply.

4. Operating Instructions

4.1. Initial Use

It is recommended to keep the light on for 30 minutes after installation to check for abnormal heating or flickering.

4.2. Switch Control

  • Control the light switch and brightness adjustment via the wall switch or remote control (if equipped).
  • For 2.4G remote dimming models, you can also download a mobile app to control the lighting fixtures.
Mobile app control interface for dimming and color temperature
Mobile app interface for controlling light dimming and color temperature.

5. Cleaning and Maintenance

After turning off the power, wipe the shade with a dry soft cloth. Avoid using chemical cleaners to prevent corrosion of the diffuser.

When replacing the light source, turn off the power and use an LED module of the same specifications.

6. Troubleshooting

If issues such as flickering, failure to light, or abnormal noise occur, turn off the power and check the wiring. If the issue persists, contact after-sales service.

7. Specifications

Attribute Value
Product Name LED Ceiling Light
Brand Name JKGBL
Dimensions (Diameter x Thickness) 23CM, 30CM, 38CM, 50CM, 60CM (all 5CM thick)
Wattage (by Diameter) 23CM-13W, 30CM-27W, 38CM-36W, 50CM-48W, 60CM-64W
Luminous Flux 2000-82000 (range, specific to wattage)
Applicable Area 3-25 square meters (depending on wattage)
Application Kitchen, Dining Room, Bed Room, Foyer, Study, Exhibition Hall, Corridor, Balcony
Materials Iron, Ironware + Acrylic
Finish Iron (Forged Technics)
Light Source LED bulbs (Bulbs Included: Yes)
Power Source AC
Voltage AC180-250V (220 V listed in properties)
Is Dimmable Yes (with remote control or app)
Switch Type Touch On/Off Switch (likely referring to remote/app control)
Installation Method Surface mounted, self-contained
Certification CE, EMC, ROHS
Is Smart Device No (but supports app control for 2.4G models)
Product dimensions and wattage/area table for various sizes
Detailed dimensions, wattage, and recommended lighting area for each size variant.

8. User Tips

  • Memory Function: For models with 2.4G remote dimming, the light features a memory function. This means your last chosen light color and brightness settings will be retained even after turning the light off and on from the wall switch.
  • Voltage Compatibility: The light is designed for AC180-250V. If you are in a region with a 110V power supply (e.g., Canada), please ensure compatibility or use an appropriate voltage converter if necessary.

9. Warranty and Support

9.1. Warranty Period

The product comes with a 2-year warranty, subject to the purchase certificate. Non-man-made damages are eligible for free repair services during this period.

9.2. Return and Exchange Policy

  • Please inspect the packaging upon receipt and record the unboxing process.
  • If the fixture is damaged, apply for a refund or replacement through the platform with evidence.
  • A 7-day no-questions return is available for uninstalled, packaging intact items.
  • A 15-day replacement is offered for quality issues.

9.3. Customer Support

For any issues during installation or use, please contact us through the platform where you purchased the product.

You can also refer to the User manual (PDF) for additional information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.