1. Introduction
This manual provides detailed instructions for the installation and operation of your ANYFAR Wireless CarPlay Android Auto Retrofit Kit. This device integrates Apple CarPlay and Android Auto functionalities into your existing Volvo infotainment system, enhancing your driving experience with smart navigation, communication, and entertainment features.

Image 1.1: Overview of the ANYFAR Wireless CarPlay Android Auto Retrofit Kit module and its interface displayed on a Volvo 9-inch screen.
2. Safety Information
- Always disconnect the vehicle's battery before performing any electrical work to prevent short circuits and electrical shock.
- Ensure all connections are secure and properly insulated to avoid interference or damage.
- If you are unsure about any installation steps, it is highly recommended to seek professional installation services.
- Do not operate the device in a way that distracts you from driving. Always prioritize road safety.
3. Package Contents
Please check the package for the following items:
- ANYFAR CarPlay/Android Auto Module
- Main Wiring Harness
- LVDS Cables
- USB Cable
- User Manual (RM-V-V2510F)

Image 3.1: The ANYFAR module and the included user manual (RM-V-V2510F) as found in the product packaging.
4. Compatibility
This retrofit kit is compatible with specific Volvo models and years, provided they have a 9-inch screen.

Image 4.1: Compatibility table for Volvo models.
| Car Model | Years | Screen Size |
|---|---|---|
| XC40 | 2017-2022 | 9" Screen |
| XC60 | 2017-2022 | |
| XC90 | 2017-2022 | |
| S60 | 2020-2022 | |
| S90 | 2017-2022 | |
| V60 | 2020-2022 | |
| V90 | 2017-2022 |
5. Setup and Installation
5.1. Tools Required
- Plastic pry tools (for trim removal)
- T27 Torx screwdriver
- Basic automotive toolkit
5.2. Preparation
- Park your vehicle on a level surface and engage the parking brake.
- Turn off the ignition and remove the key.
- Disconnect the negative terminal of your car's battery to prevent electrical issues during installation.
5.3. Dash Disassembly
The installation requires careful disassembly of parts of your vehicle's dashboard. Specific steps may vary slightly by model year. It is highly recommended to consult vehicle-specific disassembly guides or videos for your exact Volvo model.
- Carefully use plastic pry tools to remove trim pieces from the passenger side, steering wheel area, and the side panel in the passenger footwell.
- Access to the back of the main screen and potentially the speedometer screen area will be required. This may involve dismantling a significant portion of the front console.
5.4. Wiring Connections
Follow the diagram below to connect the ANYFAR module to your vehicle's factory wiring. Ensure all connectors are fully seated and secure.

Image 5.1: Main wiring diagram for connecting the ANYFAR module. Connect the module's LVDS OUT to the Factory LCD FPC, the module's CAMERA/USB to the Factory Video FPC, and the module's Power input to the Factory Power Harness.
- Locate the factory LCD FPC (Flexible Printed Circuit) and connect it to the corresponding LVDS OUT port on the ANYFAR module.
- Locate the factory Video FPC and connect it to the CAMERA/USB port on the ANYFAR module.
- Connect the provided power harness from the ANYFAR module to the vehicle's factory power harness.
- Ensure all connections are firm and correctly oriented.
5.5. Reassembly
- Carefully route all cables to prevent pinching or interference.
- Reassemble the dashboard components in reverse order of disassembly.
- Reconnect the negative terminal of your car's battery.
- Test the system before fully securing all trim pieces.
6. Operating Instructions
6.1. Switching Between Systems
To switch between your vehicle's original OEM system and the CarPlay/Android Auto system, long-press the 'K' button on your car's control knob.

Image 6.1: Illustration of switching between the OEM car system, Apple CarPlay, and Android Auto by long-pressing the 'K' button on the car knob.
6.2. Wireless CarPlay and Android Auto Connection
For optimal performance, ensure your vehicle's audio system is set to Bluetooth music mode before connecting.

Image 6.2: Diagram showing the wireless connection flow from a smartphone to the upgrade kit via Bluetooth, with the car screen displaying available Bluetooth devices.
- Enable Bluetooth and Wi-Fi: On your smartphone, turn on both Bluetooth and Wi-Fi.
- Search for Device: On your car's infotainment screen, navigate to the Bluetooth settings. Search for and select the device named