ONIX Tocata XM2

Contents

ONIX Tocata XM2 Portable HiFi Player

Instruction Manual

1. Introduction

This manual provides detailed instructions for the safe and efficient use of your ONIX Tocata XM2 Portable HiFi Player. Please read this manual thoroughly before operating the device and keep it for future reference.

2. Safety Information

To ensure safe operation and prevent damage to the device or injury to yourself, please observe the following safety guidelines:

  1. Do not repair, disassemble, or modify the device without permission.
  2. Avoid using the device in extremely hot, cold, dusty, or humid conditions. Keep away from liquids.
  3. The device may become warm during charging; this is normal.
  4. Protect the device from falls, friction, or impacts with hard objects. Avoid violent vibration.
  5. Listen at a proper volume to protect your hearing and the sound system. Reduce volume before plugging in headphones.
  6. Do not clean with chemicals or detergents, as this may damage the surface coating.
  7. The USB port is for data transmission or charging only. Avoid using the device while it is charging.
  8. Charge the device regularly when not in use to maintain battery life.
  9. Replace the battery only with the same type to avoid explosion risks.
  10. Do not expose the battery to direct sunlight, fire, or other extreme heat.

3. Product Overview

3.1. What's in the Box

  • ONIX Tocata XM2 Portable Music Player
  • Quick Start Guide
  • USB A to Type-C Cable
  • Front Protective Film (2 pieces)
  • Warranty Card

3.2. Parts Identification

Refer to the diagram below to identify the various parts and controls of your ONIX Tocata XM2.

Diagram of ONIX Tocata XM2 showing numbered parts

Figure 1: Front and Top View of ONIX Tocata XM2

  1. 3.0-inch Touch Screen (720 x 720)
  2. Power/Lock Button / Volume Control Wheel
  3. Previous Song Button
  4. Play/Pause Button
  5. Next Song Button
  6. Custom Function Button (Fn)
  7. 3.5mm Headphone/Line Output
  8. 4.4mm Balanced Headphone Output
Diagram of ONIX Tocata XM2 showing bottom ports

Figure 2: Bottom View of ONIX Tocata XM2

  1. Micro SD Card Slot
  2. Type-C USB Data Port

4. Setup and Basic Operation

4.1. Power ON/OFF and Screen Locking

  • Power On: Press and hold the Power button for 2 seconds.
  • Power Off: Press and hold the Power button for 2 seconds until the power off confirmation window appears. Select "OK".
  • Screen Lock: While powered on, short press the Power button to lock the screen and turn off the display. Short press again to unlock.

4.2. Charging the Device

It is recommended to use a DC5V 2A adapter for charging. Connect the device to the adapter using the provided USB Type-C cable. The charging icon and battery level will be displayed on the LCD screen.

4.3. Inserting a Micro SD Card

  • The device supports standard Micro SD cards up to 2TB capacity.
  • Insert the Micro SD card into the card slot (Part 9) in the indicated direction and gently press until it clicks into place.
  • To remove, press the card again until it springs out.

4.4. Connecting Headphones

The Tocata XM2 offers both a 3.5mm single-ended headphone output (Part 7) and a 4.4mm balanced headphone output (Part 8). Ensure the volume is turned down before connecting headphones. Use the 4.4mm output only with headphones that have proper balanced wiring.

5. Operating Instructions

5.1. Playback Controls

  • Play/Pause (Part 4): Short press to play or pause playback.
  • Previous Song (Part 3): Short press to jump to the previous song or to the beginning of the current song. Long press for fast rewind.
  • Next Song (Part 5): Short press to jump to the next song. Long press for fast forward.
  • Volume Control (Part 2): Rotate the wheel to decrease or increase the volume.

5.2. Screen Rotation

Navigate to System Settings > Rotation to change the screen orientation (0°, 90°, 180°, 270°).

5.3. Custom Function Button (Fn)

The Custom Function Button (Part 6) can be configured. Go to System Settings > Custom button to assign a desired function.

5.4. USB Port Functions

5.4.1. Data Transport to Micro SD Card

  1. Swipe down from the top of the screen to access the quick access menu.
  2. Ensure the USB mode is set to "USB Storage".
  3. Connect the device to a computer using the USB Type-C cable. The device will appear as a new drive.
  4. Copy your desired music files to the Micro SD card.
  5. After disconnecting, go to "Update Library" and select "Scan music now" to add new files to your library.

5.4.2. Using as a USB DAC

  1. Swipe down from the top of the screen to access the quick access menu.
  2. Ensure the USB mode is set to "USB DAC".
  3. For Windows users, download and install the necessary drivers from the ONIX website.
  4. For Mac users, no additional drivers are required.

6. Maintenance

6.1. Cleaning

Use a soft, dry cloth to clean the device. Do not use liquid cleaners, solvents, or abrasive materials, as they can damage the finish.

6.2. Firmware Update

Always ensure the device is fully charged before performing a firmware update. Do not operate the device during the update process.

6.2.1. Over-the-Air (OTA) Update

  1. Turn on Wi-Fi and connect to an available network.
  2. Go to System Settings > System Update > Network Update to automatically update to the latest firmware.

6.2.2. Micro SD Card Update

  1. Download the latest firmware from the ONIX official website.
  2. Copy the firmware file to the root directory of your Micro SD card.
  3. Go to System Settings > System Update > TF card update.
  4. Confirm the update when prompted.

7. Troubleshooting

  • Device not starting: May be due to low or exhausted battery. Recharge and try again.
  • Device unresponsive: Press and hold the Power button for 10 seconds to force a shutdown, then power on again.
  • Noise from headphones: Ensure the headphone plug is fully and correctly inserted into the output jack. Try re-inserting.
  • No sound output: Check the system volume settings. Try a different pair of headphones or audio cable.
  • Charging issues: Ensure you are using a DC5V 2A adapter. Higher voltage adapters may damage the device.

8. Specifications

ONIX Tocata XM2 main features and design

Figure 3: ONIX Tocata XM2 Front View with dB Meter

FeatureDetail
Dimensions82 x 65 x 18 mm
Weight140g
System PlatformIngenic X2000
SystemIn-House Developed Pure Music System
DisplaySquare 3-inch OLED Touch Screen (720p)
DACCirrus Logic CS4308P (8-channel)
Amplifiers2x OPA1612 (I/V conversion), 2x SGM8262 (Output)
PlaybackMicroSD Card (up to 2TB), Tidal Online Streaming
ControlsTouch Screen, 4 Hardware Buttons, Volume Wheel
Remote ControlsSyncLink through Eddict Player app (Android & iOS)
Bluetooth ConnectivityTwo-Way Bluetooth 5.2
Bluetooth Codec SupportLDAC / aptX HD / aptX / SBC / AAC
Wi-Fi Connectivity2.4G/5G, DLNA, AirPlay, Tidal
USB FeaturesUSB DAC and USB Digital Output
Hi-Res File SupportPCM 768kHz / 32bit, DSD512
Headphone Outputs3.5mm Single-Ended, 4.4mm Balanced
Battery3000 mAh, standard USB-C charging port
Battery LifeUp to 8.5 hours (Single-Ended or Balanced)

8.1. 3.5mm Single-Ended Output Specifications

  • Output Power Low gain: 1.28V@32Ω (51mW@32Ω)
  • Output Power High gain: 2.56V@32Ω (204mW@32Ω)
  • Frequency Response: 20Hz-40kHz (-0.5dB)
  • THD+N: 0.0005% @32Ω (A-Weight @ 1.5Vrms High Gain)
  • Dynamic Range: 121dB
  • Channel Separation: 73dB
  • Noise: 114dB
  • Output Impedance: 0.4Ω

8.2. 4.4mm Balanced Output Specifications

  • Output Power Low gain: 2.54V@32Ω (200mW@32Ω)
  • Output Power High gain: 5.08V@32Ω (800mW@32Ω)
  • Frequency Response: 20Hz-40kHz (-0.5dB)
  • THD+N: 0.0005% @32Ω (A-Weight @ 1.5Vrms High Gain)
  • Dynamic Range: 124dB
  • Channel Separation: 112dB
  • Noise: 114dB
  • Output Impedance: 0.7Ω
Detailed output specifications for 3.5mm and 4.4mm outputs

Figure 4: Output Specifications Diagram

9. User Tips

  • For optimal performance, ensure your Micro SD card is formatted correctly (NTFS, FAT32, or exFAT).
  • Regularly update your music library after adding new files to ensure all tracks are visible.
  • Experiment with different gain settings (low/high) and digital filters to find the sound profile that best suits your headphones and listening preferences.
  • Utilize the SyncLink feature via the Eddict Player app for convenient remote control of your device.

10. Warranty and Support

For detailed warranty information, please refer to the included Warranty Card. Technical certification information for the ONIX Tocata XM2 can be viewed on the device display by navigating to Settings > Technical Certification.

Due to continuous product improvement, specifications and design are subject to change without prior notice.

For further assistance, please visit the official ONIX website or contact customer support.

Environmental Information: This product has an environmental protection use period of 10 years under normal operating conditions.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.