Product Overview
The Multifunctional Wall-Mounted Storage Rack is a versatile accessory designed to enhance organization in your bathroom or kitchen. It features a sturdy holder for toilet paper or kitchen towels and an integrated shelf for storing various items.

Key Features:
- Multifunctional Design: Serves as a toilet paper holder, kitchen towel rack, and a storage shelf for phones, seasoning bottles, or other small items.
- Thickened ABS Material: Constructed from durable, thickened ABS plastic for enhanced longevity.
- Strong Load Bearing: Capable of holding up to 5kg on suitable surfaces.
- Traceless Nail-Free Installation: Utilizes a strong adhesive patch for easy, drill-free mounting without damaging walls.
- Wear-Resistant and Scratch-Resistant: Designed to withstand daily use without showing traces of wear.


Specifications
| Attribute | Detail |
|---|---|
| Material | Plastic (ABS) |
| Dimensions (Approx.) | Length: 18 cm, Depth: 11.2 cm, Height: 9.6 cm |
| Load Capacity | Up to 5 kg (on suitable, properly prepared surfaces) |
| Type | Paper Holders |
| Origin | Mainland China |
| High-concerned chemical | None |
| Package Weight (Approx.) | 0.126 kg |
| Package Dimensions (Approx.) | Length: 18 cm, Width: 11 cm, Height: 8 cm |

Package Contents
- 1 x Toilet Paper Holder with Storage Shelf
- 1 x Adhesive Patch (Note: The style and color of the adhesive patch may vary, but its function remains the same.)
Setup Instructions
Important Safety Information:
- The load-bearing capacity of the product varies depending on the wall surface. Always refer to the actual condition of your wall.
- Do not hang heavy, fragile, or valuable items on the rack. The maximum recommended load is 5kg.
Surface Compatibility:
For optimal adhesion and stability, ensure your wall surface is smooth, dry, and dust-free.
Suitable Wall Surfaces:
- Smooth ceramic tiles / Marble
- Smooth glass
- Smooth metal
- Smooth paint surface with wood grain
- Wooden Wall
Unsuitable Wall Surfaces:
- Cement wall surface
- Painting the wall
- Wallpaper wall
- Concave convex ceramic tiles
- Concave convex metal
- Concave convex marble
- Diatom mud wall surface
Installation Steps:
- Clean the Wall: Use a dry cloth to thoroughly clean the desired installation area on the wall. Ensure it is free of dust, grease, and moisture.
- Install Patch on Product: Carefully attach the adhesive patch to the designated area on the back of the product.
- Remove Protective Film: Peel off the protective film from the adhesive side of the patch.
- Press onto Wall: Position the product on the cleaned wall surface and press it firmly, ensuring even contact.

Post-Installation Precautions:
- Squeeze Out Air: After pressing, ensure to squeeze out any trapped air bubbles from under the adhesive patch.
- Avoid Gaps: Make sure there are no gaps between the patch and the wall surface.
- Keep Dry: Avoid getting the adhesive wet with water immediately after installation.
- Curing Time: Allow the adhesive to cure for 48 hours before placing any items on the rack or using it. This ensures maximum adhesion and stability.
Operating Instructions
- Toilet Paper/Towel Dispensing: Insert a standard roll of toilet paper or a kitchen towel roll onto the holder bar.
- Shelf Usage: Utilize the integrated top shelf to store small items such as mobile phones, wet wipes, small decorative items, or seasoning bottles.
- Load Limit: Do not exceed the recommended load capacity of 5kg to prevent the rack from detaching or breaking.
Maintenance
- Cleaning: Clean the product regularly with a soft, damp cloth. Avoid using abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the plastic surface.
- Adhesive Re-application: If the adhesive patch loses its stickiness due to dust or moisture over time, it can be washed with water. After washing, ensure it is thoroughly dried before reattaching it to a clean, dry wall surface.
Troubleshooting
Common Issues and Solutions:
- Problem: The holder does not stick to the wall or falls off.
Solution: Review the 'Setup Instructions' section carefully. Ensure the wall surface is one of the 'Suitable Wall Surfaces' and is perfectly clean, dry, and dust-free before application. Allow the full 48-hour curing time before use. If the adhesive patch is missing from your package, please contact customer support. - Problem: The product appears flimsy or has minor imperfections.
Solution: This product is made of plastic. While designed for durability, it should be handled with care. Avoid dropping it or applying excessive force. Minor variations in shape or alignment may occur due to manufacturing processes. - Problem: The toilet paper holder bar feels flimsy.
Solution: The holder bar is designed to support standard toilet paper rolls. Avoid placing excessive weight or pulling forcefully on the bar.
User Tips
- For the strongest hold, ensure the wall surface is ceramic tile, glass, or smooth metal. The adhesive may be less effective on painted walls or other textured surfaces.
- If the adhesive is not suitable for your wall type, some users have successfully used alternative mounting methods like screws (ensure the product design allows for this and you are comfortable with drilling).
- The top shelf is highly practical for keeping your phone, wet wipes, or small bathroom/kitchen essentials within easy reach.
- This versatile rack can be installed in various locations, such as bathrooms for toilet paper and phone storage, or kitchens for paper towels and seasoning bottles.
- The no-drill installation is a key benefit, but proper surface preparation and adherence to the 48-hour curing time are crucial for long-lasting adhesion.
Warranty and Support
This product is covered by the standard warranty policies of the retailer from which it was purchased. For specific warranty details, returns, or support inquiries, please refer to the seller's contact information or the platform's customer service where you made your purchase.
Additional item guides and documents may be available. Please check the product page or contact the seller for more information.