Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Chevolink Smart Light Control Switch (Model DS-102). Please read this manual thoroughly before installation and use to ensure safe and correct operation.
The Chevolink Smart Light Control Switch allows you to control your lights remotely via the Smart Life/Tuya app, voice commands through smart assistants like Alexa and Google Home, and traditional touch control. It supports timing, scheduling, and countdown functions to automate your home lighting.
Important Safety Information
- Always shut off power at the circuit breaker before installing or servicing the switch. Failure to do so may result in serious injury or death.
- This product is designed for indoor use only.
- Basic electrical wiring knowledge or experience is required. If you are unsure about any part of the installation, please consult a qualified electrician.
- Ensure your home's electrical system has a neutral wire for proper operation of this switch.
- Do not exceed the maximum load of 600W per gang.
- This switch supports a 2.4GHz Wi-Fi network only (802.1 b/g/n). It is not compatible with 5GHz Wi-Fi networks.
- Only supports one-way/single-pole circuits; not compatible with 2-way (multi-location) switch setups.
Package Contents
Please check the package for the following items:
- 1 x Chevolink Smart Light Control Switch (DS-102)
- 1 x User Manual
- 2 x Mounting Screws
Setup and Installation
1. Wiring Diagram (Requires Neutral Wire)
This switch requires a neutral wire for operation. Please ensure your electrical box has a neutral wire available.

Figure 1: Back of the switch with wiring terminals. L for Live, N for Neutral, L1, L2, L3, L4 for Light outputs.
Wiring Connections:
- Connect the Live Wire (typically black or brown) from your wall box to the 'L' terminal on the switch.
- Connect the Neutral Wire (typically white or blue) from your wall box to the 'N' terminal on the switch.
- Connect the Light Wires (load wires) from your light fixtures to the corresponding 'L1', 'L2', 'L3', 'L4' terminals on the switch. For a 3-gang switch, you will typically use L1, L2, and L3.
Important: Ensure all wire connections are secure to prevent loose connections and potential hazards.
2. Physical Installation
- Power Off: Before starting any electrical work, go to your circuit breaker panel and turn off the power to the switch location. Verify the power is off using a voltage tester.
- Remove Old Switch: Carefully remove your existing wall plate and old switch. Disconnect the wires from the old switch.
- Wire the Smart Switch: Connect the wires from your wall box to the Chevolink Smart Switch according to the wiring diagram above.
- Mount the Switch: Gently push the wired switch into the wall box. Use the provided screws to secure the switch to the wall box.
- Attach Wall Plate: Snap on the new wall plate (if provided, or use your existing one if compatible).
- Restore Power: Go back to your circuit breaker panel and turn the power back on.
- Test Manually: Briefly touch the switch buttons to ensure the lights turn on and off manually.
Video: Step-by-step installation and wiring guide for the Chevolink Smart Light Switch.
3. App Download and Pairing
- Download App: Download the "Smart Life" or "Tuya Smart" app from the Apple App Store or Google Play Store.
- Register/Login: Open the app and register for a new account or log in if you already have one.
- Enable Bluetooth & Wi-Fi: Ensure Bluetooth and Wi-Fi are enabled on your smartphone. Your phone must be connected to a 2.4GHz Wi-Fi network.
- Enter Pairing Mode: Power on the switch. The indicator light on the switch should start flashing rapidly. If it doesn't, long-press any button on the switch for about 10 seconds until the indicator light flashes rapidly.
- Add Device: Open the Smart Life app. A pop-up window "device to be added" should appear at the bottom of the screen. Tap "Add". If no pop-up appears, tap the "+" icon in the top right corner, then select "Switch (BLE)" or "Switch (Wi-Fi)" from the "Electrical" category.
- Connect to Wi-Fi: Confirm the flashing status in the app, then enter your 2.4GHz Wi-Fi network name and password. Tap "Next".
- Complete Pairing: The app will begin connecting to the device. Once successfully added, you can rename your switch and tap "Done".
Operating Instructions
1. Manual Control
Simply touch the corresponding button on the switch to turn the connected light on or off.
2. App Control
Once paired, you can control your lights from anywhere using the Smart Life/Tuya app:
- On/Off: Tap the power icon next to each switch in the app to turn individual lights on or off.
- All On/Off: The app may provide an option to turn all connected lights on or off simultaneously.
- Remote Control: Control your lights even when you are away from home, as long as your switch is connected to Wi-Fi and your phone has internet access.

Figure 2: Mobile phone remote control via the Smart Life app.
3. Voice Control
The switch is compatible with Amazon Alexa and Google Home. To enable voice control:
- Link your Smart Life/Tuya account to your Alexa or Google Home app.
- Discover devices in your smart assistant app.
- Once discovered, you can use voice commands such as:
- "Alexa, turn on [Light Name]"
- "Hey Google, turn off [Light Name]"

Figure 3: Voice control integration with smart speakers.
4. Timer, Schedule, and Countdown Functions
Automate your lighting using the app's scheduling features:
- Schedule: Set specific times for your lights to turn on or off on chosen days of the week (e.g., "Turn on living room light at 6:00 PM every weekday").
- Countdown: Set a timer for your lights to turn off after a specified duration (e.g., "Turn off bedroom light in 30 minutes").
- Circulate/Cycle: Set lights to cycle on and off at regular intervals.

Figure 4: App interface for setting timers, schedules, and countdowns.
5. Backlight Control
You can turn the switch's indicator backlight on or off via the app settings:
- Navigate to the switch's settings within the Smart Life/Tuya app.
- Find the "backlight switch" option and toggle it to your preference.
6. Power-On State Setting
Configure how the switch behaves after a power outage:
- Power Failure: Switch remains off after power is restored.
- Power On: Switch turns on after power is restored.
- Power-Off Memory: Switch returns to its last state (on or off) before the power outage.
These settings can typically be found in the device settings within the Smart Life/Tuya app.
Maintenance
- Cleaning: To clean the switch, wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the surface.
- No User-Serviceable Parts: There are no user-serviceable parts inside the switch. Do not attempt to open or repair the device yourself.
- Firmware Updates: Keep your Smart Life/Tuya app updated to receive the latest features and security improvements for your switch.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Switch does not turn on/off manually. | No power to the switch; incorrect wiring; faulty switch. | Check circuit breaker. Verify wiring connections (Live, Neutral, Load). If problem persists, contact support. |
| Switch cannot connect to Wi-Fi. | Incorrect Wi-Fi password; 5GHz Wi-Fi network; switch too far from router; incorrect pairing mode. | Ensure correct 2.4GHz Wi-Fi password. Confirm your router is broadcasting 2.4GHz. Move switch closer to router. Re-enter pairing mode (long press button for 10s). |
| Voice control not working. | Smart Life/Tuya account not linked; device not discovered; incorrect voice command. | Ensure Smart Life/Tuya account is linked in Alexa/Google Home app. Discover devices. Use correct device names in commands. |
| Lights flicker or do not turn off completely. | Incompatible bulb type (e.g., some LED bulbs); no neutral wire (if applicable for your specific wiring). | Try a different type of LED bulb. Ensure neutral wire is correctly connected. |
| Switch is unresponsive. | Temporary glitch; power issue. | Turn off power at the circuit breaker for 30 seconds, then turn it back on. If unresponsive, perform a factory reset (long press any button for 10 seconds). |
Specifications
| Model Number | DS-102 |
| Input Voltage | AC 100-240V ~ 50Hz/60Hz |
| Max. Load per Gang | 600W |
| Number of Gangs | 1, 2, or 3 (depending on variant) |
| Wireless Type | Wi-Fi 2.4GHz (802.1 b/g/n) + BLE |
| Control Operating Temperature | -20°C to 50°C |
| Product Material | PC |
| Product Dimensions | 8.57 x 8.57 x 3.69 cm (3.37 x 3.37 x 1.44 inches) |
| Package Dimensions | 10.4 x 10 x 5.03 cm (4.1 x 4 x 1.98 inches) |
| Key Life | 100,000 times |
| Certifications | CE, RoHS, UL |

Figure 5: Product Information table with detailed specifications.
User Tips
- Wi-Fi Range: For optimal performance, ensure your smart switch is within a reasonable range of your 2.4GHz Wi-Fi router.
- Device Naming: Use simple and distinct names for your lights in the Smart Life/Tuya app (e.g., "Living Room Light," "Bedroom Lamp") for easier voice control.
- Automation: Explore the full potential of the app's automation features (scenes, schedules) to create a truly smart home experience.
- Factory Reset: If you encounter persistent issues or need to re-pair the device, perform a factory reset by long-pressing any button on the switch for approximately 10 seconds until the indicator light flashes rapidly.
Warranty and Support
For warranty information, technical support, or further assistance, please refer to the seller's policy or contact the customer service provided by your point of purchase. Keep your purchase receipt as proof of purchase.
For additional guides and documents, you may refer to the official PDF user manual: View User Manual (PDF)