shine-tale Mini Breaker Smart Switch

Contents

Tuya WiFi/Zigbee3.0 Mini Breaker Smart Home Switch

Model: Mini Breaker Smart Switch | Brand: shine-tale

1. Introduction

This manual provides essential information for the safe and efficient use of your Tuya WiFi/Zigbee3.0 Mini Breaker Smart Home Switch. Please read these instructions carefully before installation and operation, and retain them for future reference.

The Mini Smart Switch is designed to integrate seamlessly into your smart home ecosystem, offering remote control, voice control, and two-way control capabilities for your lighting and electrical appliances. It supports both Wi-Fi 2.4G and Zigbee 3.0 wireless communication protocols.

Tuya Mini Smart Switch product overview with logos for Zigbee, WiFi, Tuya Smart, Smart Life, Google Assistant, and Amazon Alexa.

Image: Product overview highlighting compatibility with various smart home platforms.

2. Safety Information

WARNING: Electrical installation should only be performed by a qualified electrician. Always disconnect power at the circuit breaker before installing or servicing this device. Failure to do so may result in serious injury or death.

  • Ensure the power supply is within the specified voltage and current limits.
  • Do not expose the device to moisture or extreme temperatures.
  • Do not attempt to disassemble or repair the device yourself.
  • S1 and S2 terminals are for wall switches only and must not be connected to strong power sources like live or neutral lines.

3. Specifications

Parameter Value
Wireless Type Wi-Fi 2.4G (IEEE 802.11 b/g/n), Zigbee 3.0
Input Voltage AC 100-240V 50/60Hz
Max Current 16A / 20A (depending on model)
Output Voltage AC 100-240V 50/60Hz
Material PC V0
Dimensions 42.6 x 42.6 x 20 mm
Wireless Communication RF
Certification CE
Mini Smart DIY Switch dimensions 41x41x20mm and key features: Mini Body, APP Remote Control, Voice Control, Timing/Countdown, Two-way Control, Excellent Heat Dissipation, Group Control, Relay Status Setting.

Image: Key features and dimensions of the Mini Smart Switch.

4. Setup

4.1. Pre-installation Checklist

Before proceeding with installation, ensure the following:

  • Your smartphone or tablet is connected to a 2.4GHz Wi-Fi network. (5GHz networks are not supported for initial setup).
  • You have the correct Wi-Fi password.
  • Your smartphone or tablet has access to the App Store (iOS) or Google Play Store (Android) to download the required application.
  • Ensure your router's MAC address filtering is not preventing new devices from connecting.

4.2. Wiring Instructions

The ON/OFF operating principle is that the connected appliances are controlled by switching the live wire power on/off. The device must be powered by both the Live (L) and Neutral (N) lines.

Warning: The S1 and S2 terminals are exclusively for connecting to the two ends of a wall switch. They must NOT be connected to strong power sources such as the live or neutral line, as this can damage the device or pose a safety risk.

4.2.1. Wiring Diagram for Electrical Appliance

Wiring diagram for connecting the Mini Smart Switch to an electrical appliance. Shows L-in, N-in, L-out, N-out connections.

Image: Diagram illustrating how to wire the smart switch to control a general electrical appliance.

4.2.2. Wiring Diagram for Light

Wiring diagram for connecting the Mini Smart Switch to a light fixture. Shows L-in, N-in, L-out, N-out connections to a light bulb.

Image: Diagram illustrating how to wire the smart switch to control a light fixture.

4.2.3. Two-Way Control Wiring

Wiring diagram for two-way control using the Mini Smart Switch with two parallel switches or a series switch.

Image: Diagram showing how to set up two-way control with the smart switch, connecting to two parallel switches or a series switch.

4.3. App Installation and Device Pairing

Follow these steps to install the app and pair your device:

  1. Download the "Smart Life" app from the App Store (iOS) or Google Play Store (Android).
  2. Register a new Smart Life account if you don't have one, or log in with your existing account.
  3. After completing the wiring, power on the device. The device will be ON by default.
  4. Press and hold the button on the Mini Smart Switch for approximately 5 seconds until the Wi-Fi blue LED indicator blinks rapidly (2 times per second). This indicates pairing status.
  5. Open the Smart Life app, tap the "+" icon in the upper right corner of the page to enter the network connection page.
  6. Confirm that the device's indicator light is flashing rapidly in the app, then tap to proceed to the next step.
  7. Input your Wi-Fi network name and password.
  8. Name your device within the app (e.g., "Bedroom Light").
  9. Once the Wi-Fi LED on the device is solid (not blinking), the device is online and ready for control.

Video: Demonstration of device pairing, app control, voice control, and two-way control setup.

5. Operating Instructions

5.1. App Control

Once paired, you can control your Mini Smart Switch directly from the Smart Life app. The app interface will show a toggle switch for your device. Tap to turn the connected appliance ON or OFF.

5.2. Voice Control

The Mini Smart Switch is compatible with voice assistants such as Amazon Alexa, Google Home, and Yandex Alice. After linking your Smart Life account to your preferred voice assistant, you can use simple voice commands to control your devices.

Example commands:

  • "Alexa, turn on [Device Name]."
  • "Hey Google, turn off [Device Name]."
Voice control example showing Alexa and Google Home devices controlling a light via the smart switch.

Image: Example of using voice commands with Amazon Alexa and Google Home to control the smart switch.

5.3. Two-Way Control

The device supports two-way control, allowing you to operate the connected appliance from multiple physical switch locations in addition to app and voice control. Refer to the wiring diagram in Section 4.2.3 for proper installation.

5.4. Group Control

You can add multiple Mini Smart Switches to a group within the Smart Life app to achieve rapid, simultaneous control of several devices. This is useful for controlling all lights in a room or area with a single command.

Group control function diagram showing multiple smart switches in a house layout controlled by a smartphone app.

Image: Illustration of the group control feature, allowing multiple switches to be controlled together via the app.

5.5. Relay Status Setting

Within the Smart Life app settings for your device, you can configure the relay status. This allows you to set the default state of the switch (ON, OFF, or Remember Last Status) after a power outage or restart.

6. Maintenance

  • Keep the device clean and free from dust. Use a dry, soft cloth for cleaning.
  • Do not use chemical cleaners or abrasive materials.
  • Periodically check wiring connections to ensure they are secure.

7. Troubleshooting

Device not pairing or connecting to Wi-Fi:
Ensure your Wi-Fi network is 2.4GHz. Check your Wi-Fi password. Make sure the device's indicator light is blinking rapidly (2 times/second) during pairing mode. If using a Zigbee version, ensure your Zigbee gateway is properly set up and within range.
Manual wall switch requires two flips to operate:
This can occur with certain types of wall switches (e.g., bistable/rocker switches) that are not fully compatible with the smart switch's default monostable mode. Check if your smart switch's settings in the app offer an option to change the switch type or relay behavior. If not, consider using a momentary push-button switch or a compatible smart wall switch.
Device is unresponsive or defective:
First, ensure the device is receiving power. If the device was recently installed and is not functioning, double-check all wiring connections according to the diagrams. If the issue persists, the unit may be defective. Contact customer support for assistance.
Zigbee version shows 3.0 on box but 2.4 internally:
While the packaging may indicate Zigbee 3.0, some internal components might operate on Zigbee 2.4. This generally does not affect functionality with Zigbee 3.0 gateways as Zigbee is backward compatible. If you experience specific compatibility issues, ensure your gateway firmware is up to date.
No consumption monitoring:
This model does not feature power consumption monitoring. If this feature is critical for your application, verify product specifications before purchase.

8. User Tips

  • Home Assistant / Zigbee2MQTT Compatibility: Many users report successful integration with Home Assistant via Zigbee2MQTT, making it a good choice for advanced smart home setups.
  • Compact Design: The small size of the switch allows it to fit well into universal electrical boxes, making installation easier in various locations.
  • Low Standby Power: The device consumes approximately 0.6 watts in standby mode, contributing to energy efficiency.
  • Easy Programming: The pairing process is generally straightforward and quick, allowing for rapid integration into your smart home system.

9. Warranty and Support

For detailed warranty information and customer support, please refer to the official product documentation or contact the seller directly. Additional guides and documents, including a user manual in PDF format, may be available for download. You can find the user manual PDF at https://manuals.plus/m/6c47d4b2ef98082e5d1a2822f1e6c00af711e01ed8542879bf3071b982ff5390.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.