Meross MS605

Contents

Meross Matter Smart Presence Sensor Thread MS605 User Manual

Model: MS605

1. Introduction

Product Description

The Meross Battery-Powered Presence Sensor (MS605) utilizes 24 GHz low-power millimeter-wave radar combined with infrared dual-detection technology to accurately detect motion, micro-movements, and stationary presence. It also simultaneously monitors ambient light levels. The device uses the Thread protocol to upload presence and illuminance data to Matter in real time, enabling seamless whole-home smart integration. Its battery-powered design ensures quick and flexible installation.

Key Features

  • Matter over Thread Protocol: Direct connection to Apple HomeKit, Alexa, Google Home, SmartThings, and Home Assistant without an extra hub (like Meross MSH450) or 2.4GHz Wi-Fi.
  • 3-in-1 Smart Sensing Technology: Combines millimeter-wave radar, infrared, and light sensing for accurate and reliable detection.
  • Millimeter-wave radar: Detects subtle micro-movements (e.g., breast movements while breathing).
  • Infrared sensor: Filters non-heat motion like curtains or robot vacuums.
  • Light sensor: Enables smart lighting control (note: Alexa currently doesn’t support the light sensor).
  • All-Scenario Flexible Mounting: Features a 90° foldable + 360° rotatable stand for versatile installation on ceilings, walls, or corners.
  • Durable Design: IP67 waterproof rating and reliable operation from -20°C to +60°C.
  • Long Battery Life: Powered by a CR123A lithium battery, offering up to 3 years of standby time.
  • Three-Zone Smart Scene Control: Divide the detection range into three customizable zones within the Meross App for advanced automation.

Product overview and key features of the Meross MS605 Smart Presence Sensor.

2. Safety Information

WARNING: This product contains a battery. Keep out of reach of children. Do not swallow.

  • Swallowing may cause severe internal burns within 2 hours and could lead to death.
  • If you suspect a battery has been swallowed or inserted into any part of the body, seek medical attention immediately.
  • Do not use the product if damaged or modified. Contact support if defects are found.
  • Do not disassemble, puncture, or expose to impact. Improper use may void the warranty.

3. Package Contents

  • Presence Sensor x1
  • User Manual x1
  • Fastener x1
  • Battery CR123A x1
  • Battery Compartment Opener x1
  • Hook-and-loop Fastener x1

4. Setup

4.1 Device Overview

Diagram showing the components of the Meross MS605 sensor, including the PIR sensor, 24GHz low-power mmWave radar, and light sensor.

Exploded view of the Meross MS605 sensor components.

  • Infrared Motion Sensor Lens
  • Light Sensor (ensure it's not blocked)
  • Millimeter-wave Radar Emission Area
  • Button
  • Adjustable Bracket
  • Battery Compartment

4.2 Battery Installation

If the battery compartment is hard to open, use the included opener to assist. Insert the CR123A battery into the compartment, ensuring correct polarity.

Diagram showing the Meross MS605 sensor disassembled with the CR123A battery and internal components.

Disassembled view of the sensor showing battery and internal structure.

4.3 Meross App Setup

  1. Download the Meross app from the App Store or Google Play.
  2. Follow the instructions in the Meross app to complete the basic setup via Bluetooth.
  3. Ensure your mobile system is updated to at least iOS 16.1 or Android 8.1 (with Bluetooth 4.2 or above).
  4. Ensure the Meross app is granted access to the required system permissions and that Bluetooth on your smartphone is enabled.

4.4 Matter Setup

For the best experience, first complete the basic setup via Bluetooth in the Meross app, then pair the device to third-party platforms using the Matter setup.

  1. After initial setup in the Meross app, press and hold the sensor's button for 5 seconds until the amber LED blinks rapidly. This indicates the device is in Matter pairing mode.
  2. Open your Matter-enabled app (e.g., Apple Home, Alexa, Google Home, SmartThings) and follow the app's instructions to add the device.

Important: A Matter Hub that supports both Matter and Thread is required to add this device to a third-party Matter-enabled app.

Diagram listing currently supported Matter Hubs for Apple Home, Alexa, Google Home, and SmartThings.

Supported Matter Hubs for various platforms.

4.5 Device Installation

This device supports motion detection up to 6m and presence detection up to 4m.

Image showing the Meross MS605 sensor mounted on a wall with a 360-degree adjustable bracket.

The 360° adjustable bracket allows for flexible installation.

  • Mounting: With a 90° foldable + 360° rotatable stand, it can be installed on ceilings, walls, or corners.
  • Side-mount: Mount the sensor at a height of 1.2-1.8 m above the floor.
  • Tilting: Tilt the sensor so it directly faces the chest area of a seated or stationary person. This presence sensor relies on detecting chest breathing movements. Pointing it toward the back can reduce sensitivity, potentially causing false positives or missed detections.
  • Adhesive Tape: When applying the sensor with double-sided tape, press it firmly and evenly for 60 seconds to ensure secure adhesion. The mounting surface should be smooth, clean, and dry. Avoid painted or peeling surfaces, as the device may fall off over time.
  • Waterproofing: The device features a dual-layer waterproof design and IP67 rating, making it safe for bathroom use.
Diagram illustrating the dual-layer waterproof design and gasket-sealed areas of the Meross MS605 sensor.

Dual-layer waterproof design and gasket-sealed key areas.

5. Operating Instructions

5.1 Buttons, Indicator Lights, Functional Instructions

Mode Button Action LED Indicator
Power-on Success None Green flashes once
Start Bluetooth Setup (manual only) Single press Green fast blinking
Start Matter Setup Press and hold 5 sec Amber fast blinking
Reset/Initialization Press 5 times quickly Red light once means reset started; green light once confirms success.
Pairing Successful None Green flashes once
Pairing Failed/Offline/No Network None Red slow blinking
Presence State Change None Green flashes once
Find Device None Amber blinks for 5 seconds

5.2 Detection Range and Sensitivity

The sensor detects motion up to 6 meters and presence up to 4 meters. When ambient temperature is high and approaches body temperature, the infrared sensor's detection sensitivity and coverage area may decrease.

Diagram showing the Meross MS605 sensor detecting presence in an office setting, with an app screen displaying range and sensitivity settings.

Presence detection using optimized low-power mmWave radar.

Range sensitivity thresholds can be adjusted automatically through self-learning or manually, ensuring more accurate and stable state detection.

App screenshot showing range and sensitivity settings for the Meross MS605 sensor, with a diagram of detection zones.

App interface for adjusting range and sensitivity settings.

5.3 Multi-Sensor and Three-Zone Smart Scene Control

The detection area can be divided into multiple virtual sensors for smarter automation control and use on third-party platforms. You can divide the 6m detection range into 7 zones and block unwanted areas to minimize false triggers.

The Meross App allows you to divide the detection range into three customizable zones. Each zone can independently set presence/absence conditions and appears as separate sensors on third-party platforms for advanced automation.

  • Example (Study): 5m → main light on; 2.4m → desk lamp on.
  • Example (Bathroom): 6m → night light on; 4m → bathroom light on; 1.6m for 1s → mirror light on.
Diagram showing a bedroom with virtual sensor zones configured in the Meross app for multi-sensor automation.

Multi-sensor configuration in the Meross App for defining virtual zones.

Overhead view of a room with blue arcs indicating precision range control zones set up in the Meross app.

Precision range control to block unwanted areas and fine-tune sensitivity.

5.4 Multi-Platform Support Overview

Meross Apple Home Alexa** Google SmartThings Home Assistant
Default Name* Smart Presence Sensor Light Sensor & Matter Accessory 1 First Motion Sensor & Light Sensor Matter Accessory MS605 Illuminance & Occupancy
Presence State Name Presence Detected Motion Detected Occupied Motion Detected Occupied
Absence State Name Absence None No Motion Detect Unoccupied No Motion Unoccupied
Presence/Absence Automation ✔ ✔ ✔ ✔ ✔ ✔
Illuminance Display ✔ ✔ ❌ ✔ ✔ ✔
Illuminance Automation ✔ ✔ ❌ ❌ ✔ ✔
Multi-Sensor ✔ ✔ ✔ ✔ ❌ ✔

*These are the names displayed on third-party platforms.

**If Alexa pairing fails and asks for a Thread Network Key, refer to the guide video.

6. Maintenance

6.1 Battery Replacement

The Meross MS605 sensor is powered by a CR123A lithium battery, designed for long-lasting performance (up to 3 years standby). When the battery level is low, the device will indicate this (refer to the Meross app or your Matter-enabled app for notifications). To replace the battery:

  1. Carefully open the battery compartment using the provided opener tool if necessary.
  2. Remove the old CR123A battery.
  3. Insert a new CR123A battery, ensuring correct polarity (+/-).
  4. Close the battery compartment securely.

Note: Low ambient temperatures may reduce battery discharge capacity and shorten runtime.

7. Troubleshooting

  • Pairing Issues: If you experience difficulty pairing with Apple Home or other Matter systems via Thread, ensure you have a compatible Matter hub that supports both Matter and Thread. Some users report issues with Bluetooth and Thread not working simultaneously, requiring restarts.
  • Limited Functionality with Alexa: Alexa may have limited functionality, partly due to it being a less robust home hub for Matter.
  • Configuration Loss: If the device loses configuration after pairing or cannot be removed through the app, try resetting the device (press 5 times quickly) and re-pairing.
  • Latency: Some users report a bit of latency, especially with third-party hubs. Ensure your Matter hub and network are optimized for responsiveness.
  • False Triggers: False alarms can occur due to vibrations or moving objects (e.g., swaying leaves, curtains, operating fans, or AC). Keep plants, metal objects, and thick glass out of the detection area to prevent radar interference. Adjust sensitivity settings in the Meross app.
  • Sensor Not Responding: If the sensor is temperamental or not triggering as expected, check battery level, ensure it's within detection range, and verify that no objects are blocking the sensor's view.
  • Advanced Configuration: Note that advanced configuration options are primarily available in the Meross app.

8. Specifications

Attribute Value
Model Number MS605
Brand Name meross
Detection Angle 360°
Detection Range (Motion) 6m
Detection Range (Presence) 4m
Dimensions (W x D x H) 77 x 35 x 48.5 mm (3.03 x 1.38 x 1.91in)
Wireless Standard Matter over Thread, Bluetooth 4.3
Radar Frequency 24GHz (ISM)
Light Sensor Range 0-1800 lux
Operating Temperature -4°F(-20°C) to 140°F(60°C)
Operating Humidity 20-95% RH (non-condensing)
Waterproof Level IP67
Battery Type CR123A
Certification CE, FCC
Origin Mainland China

9. User Tips

  • Software Updates: Always keep your mobile OS (iOS 16.1+, Android 8.1+ with Bluetooth 4.2+), smart speaker systems, and platform apps up to date for the best experience and security.
  • Initial Monitoring: After selecting an installation location, monitor the sensor's performance for a period and adjust settings based on the monitoring results to achieve optimal user experience.
  • Optimal Mounting: For side-mounting, place the sensor at a height of 1.2-1.8 meters above the floor and tilt it to directly face the chest area of a seated or stationary person.
  • Avoid Interference: To prevent false alarms, keep plants, metal objects, and thick glass out of the detection area.
  • Adhesive Application: If using adhesive tape for mounting, press the sensor firmly and evenly for 60 seconds onto a smooth, clean, and dry surface to ensure secure adhesion.
  • Battery Availability: CR123A batteries may not be readily available in all local stores, so consider purchasing them online.
  • Advanced Settings: Utilize the Meross app for access to advanced configuration options, even if using the sensor with third-party platforms.

10. Warranty & Support

For detailed warranty information, please visit: https://www.meross.com/support/warranty

For support, you can contact Meross via email: support@meross.com

Visit the official website for more information: www.meross.com

11. Compliance Information

11.1 Declaration of Conformity

Meross declares that this product bearing the CE marking complies with the following EU directives: 2014/53/EU, 2014/30/EU, 2011/65/EU & (EU) 2015/863. Compliance with these Directives implies conformity to harmonized European standards that are noted in the EU Declaration of Conformity, which may be found at https://www.meross.com/support/eudoc.

Meross hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www.meross.com/support/ukco.

11.2 FCC Compliance Information Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.