1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your WJCOOLMAN Dreamer Mini PC Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and optimal performance.
The Dreamer Mini is a compact M-ATX/ITX desktop computer case featuring three-sided tempered glass panels for an expansive view of your internal components. It supports 240mm water cooling and offers efficient air circulation with magnetic and pull-out dust filters.
2. Specifications
| Feature | Specification |
|---|---|
| Model Number | Dreamer Mini |
| Chassis Type | Desktops (Horizontal) |
| Form Factor Support | MicroATX, ITX |
| Case Size (L*W*H) | 350mm * 280mm * 375mm (including foot pads) |
| Case Weight | 4kg |
| Material | Steel, Tempered Glass (3 sides) |
| Power Supply Model | ATX |
| Max GPU Length | 330mm |
| Max CPU Cooler Height | 175mm |
| Internal 2.5" Drive Bays | 2 (SSD) |
| Internal 3.5" Drive Bays | 1 (HDD) |
| RGB Support | No (Case itself, but internal components can have RGB) |
| Front I/O Ports | 1x HD Audio, 1x USB 2.0, 1x USB 3.0, Restart Button, Power Switch, LED Strip Mode Button, Indicator Light |
| Fan Slots (120mm) | Motherboard: 2, Back Panel: 1, Top: 2, Bottom: 2 (Total 7) |
| Water Cooling Support | Top: 240mm radiator, Back Panel: 120mm radiator |
| Dust Filters | Top magnetic dustproof net, Bottom pull-out dust filter |
3. Package Contents
Please check the package contents upon receipt. If any items are missing or damaged, contact your retailer.
- WJCOOLMAN Dreamer Mini PC Case
- Accessory kit (screws, standoffs, cable ties, etc.)
- User Manual (this document)
4. Setup and Installation
Before starting, ensure you have a clean, static-free workspace. Refer to your component manuals for specific installation instructions.
4.1 Removing Side Panels
The Dreamer Mini features three-sided tempered glass panels. Carefully remove the side panels by unscrewing any retaining thumbscrews and gently sliding them off. Place them on a soft, flat surface to prevent scratches.
Image: Internal view of the Dreamer Mini PC case, illustrating component layout and accessibility after panel removal.
4.2 Motherboard Installation
- Install the necessary standoffs for your MicroATX or ITX motherboard.
- Carefully place your motherboard into the case, aligning it with the standoffs and I/O shield.
- Secure the motherboard with screws.
Image: Diagram highlighting the motherboard and graphics card installation zones, indicating support for M-ATX/ITX motherboards and GPUs up to 330mm.
4.3 Graphics Card Installation
- Remove the necessary PCIe slot covers.
- Insert your graphics card into the PCIe slot on the motherboard.
- Secure the graphics card with screws. The case supports GPUs up to 330mm in length.
4.4 Storage Drive Installation
The case supports 2x 2.5" SSDs and 1x 3.5" HDD.
Image: Illustration of the drive bay locations, showing two SSD slots on the motherboard back bracket and one HDD slot on the side of the motherboard tray.
- 2.5" SSDs: Mount SSDs to the dedicated slots on the motherboard back bracket.
- 3.5" HDD: Install the HDD in the designated slot, typically located on the side of the motherboard tray.
- Secure all drives with screws.
4.5 Cooling System Installation (Fans & Radiators)
The Dreamer Mini supports a combination of air and water cooling for optimal thermal performance.
Image: Detailed diagram indicating fan and water cooling positions: Top (2x 120mm fans / 240mm radiator), Back Panel (1x 120mm fan / 120mm radiator), Motherboard side (2x 120mm fans), Bottom (2x 120mm fans).
- Fan Slots (120mm):
- Top: 2 fans
- Back Panel: 1 fan
- Motherboard side: 2 fans
- Bottom: 2 fans
- Water Cooling:
- Top: Supports up to a 240mm radiator.
- Back Panel: Supports up to a 120mm radiator.
- CPU Cooler: Max height 175mm.
4.6 Power Supply Installation
Install your ATX power supply into its designated compartment, typically at the rear or bottom of the case. Secure it with screws.
4.7 Front I/O Panel Connections
Connect the front panel cables to your motherboard. Refer to your motherboard manual for exact pin layouts.
Image: Close-up of the top front I/O panel, labeling HD Audio, Indicator Light, Restart Button, LED Strip Mode, USB 2.0, USB 3.0, and Power Switch.
- HD Audio
- USB 2.0
- USB 3.0
- Power Switch
- Restart Button
- LED Strip Mode Button
- Indicator Light
5. Operating Your PC Case
Once all components are installed and connected, and the side panels are re-secured:
- Connect your monitor, keyboard, mouse, and power cable to your PC.
- Press the Power Switch on the front I/O panel to turn on your computer.
- Use the LED Strip Mode button to cycle through available lighting effects for compatible RGB components (if installed).
- The Indicator Light will show the system's power status.
6. Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your PC components.
6.1 Dust Filter Cleaning
The Dreamer Mini is equipped with dust filters to minimize dust accumulation inside the case.
Image: Illustration of the top magnetic dust filter and the bottom pull-out dust filter, designed for easy removal and cleaning.
- Top Magnetic Dust Filter: Gently lift the magnetic filter from the top panel.
- Bottom Pull-out Dust Filter: Slide out the filter from the bottom of the case.
- Clean the filters using compressed air or a soft brush. Reinstall them once clean and dry.
6.2 Tempered Glass Cleaning
Use a microfiber cloth and a non-abrasive glass cleaner (or water) to clean the tempered glass panels. Avoid harsh chemicals that could damage the glass or coatings.
6.3 Internal Dust Removal
Periodically open the case and use compressed air to remove dust from internal components like fans, heatsinks, and PCBs. Ensure the system is powered off and unplugged before performing internal cleaning.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| PC does not power on. | Power cable disconnected, PSU switch off, front panel power switch not connected correctly. | Check all power connections. Ensure PSU switch is ON. Verify front panel power switch cable is correctly plugged into motherboard. |
| Fans are not spinning. | Fans not connected to motherboard/controller, faulty fan. | Check fan connections to motherboard fan headers or fan controller. Test fans individually if possible. |
| USB ports not working. | Front panel USB cables not connected to motherboard. | Ensure front panel USB 2.0 and USB 3.0 cables are securely connected to the corresponding headers on your motherboard. |
| Poor airflow/high temperatures. | Dusty filters, incorrect fan orientation, insufficient cooling. | Clean dust filters. Ensure fans are oriented correctly for optimal airflow (intake/exhaust). Consider adding more fans or upgrading cooling solutions. |
8. User Tips
- Cable Management: Utilize the space behind the motherboard tray for routing cables to maintain a clean interior and improve airflow.
- Component Compatibility: Always double-check the dimensions of your CPU cooler, GPU, and power supply against the case specifications (Max GPU Length 330mm, Max CPU Cooler Height 175mm) to ensure compatibility before purchase.
- Dust Prevention: Regularly clean the magnetic top and pull-out bottom dust filters to prevent dust buildup and maintain optimal cooling performance.
- Aesthetic Customization: The three-sided tempered glass design is perfect for showcasing RGB components. Plan your lighting setup for an immersive visual experience.
9. Warranty and Support
For warranty information, technical support, or to report missing/damaged parts, please contact your point of purchase or the manufacturer directly. Keep your proof of purchase for warranty claims.
Brand: WJCOOLMAN
Seller: FEARLESS PC Accessories Store