NEWBOLER BAG061

Contents

NEWBOLER 2L Bike Frame Bag Instruction Manual

Model: BAG061 | Brand: NEWBOLER

Introduction

Thank you for choosing the NEWBOLER 2L Bike Frame Bag. This manual provides essential information for the proper setup, operation, and maintenance of your new bike bag. Designed for both MTB and road bicycles, this bag offers convenient storage and protection for your cycling essentials.

Product Features

  • 2-Liter Large Capacity: Sufficient space for tools, snacks, phone, and other small items.
  • 100% Waterproof PVC Material: Provides comprehensive protection against rain and splashes, ensuring contents remain dry.
  • Knee-Rub Free Design: Slim profile designed to prevent interference with leg movement during cycling.
  • Four-Point Fixation: Secure attachment to the bike frame using hook-and-loop straps to prevent shaking.
  • Durable Construction: Made from robust PVC material for long-lasting use.

Specifications

AttributeValue
Model NumberBAG061 (also available as BAG023)
TypeTop tube bag / Bottom tube bag
MaterialPVC
FunctionRainproof
Capacity2 Liters
Dimensions (approx.)Length: 43cm (16.93in), Width: 5.7cm (2.24in), Height: 8.2cm (3.23in)
Package Weight0.461 kg
Package DimensionsLength: 42cm, Width: 21cm, Height: 8cm

For detailed dimensions, refer to the diagram below:

Diagram showing the dimensions of the NEWBOLER 2L Bike Bag: 43cm length, 5.7cm width, 8.2cm height, and indicating 2L capacity with 4 hook-and-loop straps.
Figure 1: Product Dimensions and Capacity

Setup Instructions

Follow these steps to properly install the NEWBOLER 2L Bike Frame Bag on your bicycle:

  1. Prepare the Bag: Ensure the bag is empty before installation.
  2. Thread Straps: Pass the hook-and-loop straps through the designated loops on the bag.
  3. Position the Bag: Place the bag along the top tube of your bicycle frame. Ensure there is adequate clearance, especially if you have a smaller frame. A minimum of 47cm clearance between the head tube and seat post is recommended for optimal fit.
  4. Secure Front Strap: Wrap the front strap around the head tube and secure it firmly.
  5. Secure Top Tube Straps: Wrap the top straps around the top tube and secure them firmly, ensuring the bag is centered and stable.
  6. Secure Bottom Tube Straps: Wrap the bottom straps around the down tube and secure them firmly. Adjust all straps to ensure a snug fit without any shaking.
Four-panel diagram showing the installation steps of the bike frame bag. Panel 1: Threading straps. Panel 2: Placing bag on top tube and securing front strap. Panel 3: Securing middle and rear straps. Panel 4: Fully installed bag.
Figure 2: Installation Steps
Diagram showing a bicycle frame with a measurement of 47cm between the head tube and seat post, indicating the recommended minimum clearance for the bike bag.
Figure 3: Frame Fit Reminder (47cm clearance)

Watch the product demonstration video for a visual guide on installation and features:

Video 1: NEWBOLER Bike Bag Product Demonstration and Installation

Operating Instructions

The NEWBOLER 2L Bike Frame Bag is designed for ease of use during your rides.

  • Accessing Contents: The bag features a durable zipper for easy access to your items. Open and close the zipper as needed to retrieve or store contents.
  • Capacity Utilization: The 2-liter capacity is suitable for carrying essential items such as a mini pump, multi-tool, spare tube, energy gels, phone, and wallet.
  • Waterproof Protection: The PVC material and sealed zipper ensure your belongings stay dry even in rainy conditions.
Image showing various cycling essentials like a pump, multi-tool, power bank, earbuds, and a smartphone being stored inside the open NEWBOLER bike frame bag.
Figure 4: Example of Items Stored in the Bag
Close-up image of the NEWBOLER bike bag mounted on a bicycle frame, with water droplets on its surface, highlighting its 100% waterproof feature.
Figure 5: Waterproof Performance

Maintenance

To ensure the longevity and performance of your NEWBOLER Bike Frame Bag, follow these maintenance guidelines:

  • Cleaning: Wipe the exterior of the bag with a damp cloth and mild soap if necessary. Avoid harsh chemicals or abrasive cleaners that could damage the PVC material.
  • Drying: Allow the bag to air dry completely before storing or re-attaching to your bike. Do not expose to direct sunlight for prolonged periods or use heat sources for drying.
  • Zipper Care: Periodically check the zipper for debris and clean it to ensure smooth operation. A silicone-based lubricant can be applied if the zipper becomes stiff.
  • Storage: Store the bag in a cool, dry place away from direct sunlight when not in use.
  • Inspection: Regularly inspect the straps and attachment points for any signs of wear or damage. Replace if necessary to ensure secure mounting.

Troubleshooting

  • Bag feels loose/shakes during ride: Re-tighten all hook-and-loop straps. Ensure they are securely fastened around both the top tube and down tube.
  • Knees rub against the bag: Adjust the bag's position slightly forward or backward on the top tube. Ensure the bag is centered and the slim design is utilized effectively. The "Knee-Rub Free Design" aims to minimize this, but individual bike frames and riding styles may require minor adjustments.
  • Water inside the bag after rain: Check the zipper closure to ensure it was fully sealed. Inspect the PVC material for any punctures or tears. While the bag is waterproof, extreme submersion or prolonged exposure to high-pressure water jets may exceed its resistance.
  • Zipper is stiff or difficult to open/close: Clean the zipper teeth of any dirt or grit. Apply a small amount of zipper lubricant (e.g., silicone spray) to the teeth and work the zipper back and forth.
Top-down view of a person cycling with the NEWBOLER bike bag mounted on the top tube, showing ample clearance between the rider's knees and the bag, illustrating the knee-rub free design.
Figure 6: Knee-Rub Free Design

User Tips

  • Frame Compatibility: While designed to fit most frames, always measure your bicycle's top tube length and clearance (especially between head tube and seat post) to ensure a good fit. Some users with smaller frames found the bag to be a bit large.
  • Custom Mounting: For enhanced stability, some users have successfully punched holes and screwed the bag directly to existing top bar threads on their bike, making it more stable than relying solely on straps. (Note: This modification is at the user's discretion and may affect product warranty).
  • Strap Management: The bag comes with plenty of extra straps. Ensure they are neatly secured to avoid snagging or flapping during your ride.
  • Accessibility: The design allows for easy access to contents while riding, making it convenient for quick retrieval of snacks or a phone.

Warranty and Support

NEWBOLER products are manufactured to high-quality standards. For any issues or support inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

A detailed user manual in PDF format is also available for download: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.