1. Introduction
Thank you for choosing the Xiaomi Mijia Outdoor IP66 Waterproof Dual Lens Camera 4. This manual provides essential information for setting up, operating, and maintaining your security camera. Please read it thoroughly before use to ensure proper functionality and safety.
This camera features a dual-lens system, 3K ultra-clear resolution, full-color night vision, AI human/vehicle detection, two-way audio, and IP66 weather resistance, making it ideal for comprehensive outdoor surveillance.
2. Safety Information and Disclaimer
⚠ Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.
- To prevent accidental injuries, the camera must be securely fixed according to the installation instructions.
- The installation surface of the product needs to be able to bear at least three times the total weight of the camera.
- The power adapter is not waterproof and is only suitable for indoor use.
- Do not use the product in overly humid environments, steam rooms, or underwater. Avoid water from entering the product.
3. Package Contents
Please check that all items are present and in good condition:
- Camera main unit × 1
- Power adapter × 1
- Wall-mounted/ceiling-mounted positioning sticker × 1
- Power cord waterproof rubber strip × 1
- Screw accessory kit × 1
- Network port waterproof set × 1
- Instruction Manual × 1
Image: Components included in the product package.
4. Specifications
| Feature | Specification |
|---|---|
| Brand Name | XIAOMI |
| Product Name | Xiaomi Outdoor Camera - 4 Camera Version |
| Product Model | MJSXJ10HL |
| Resolution | 2880 × 1620 (3K) |
| Light Circle | f/1.6 |
| Video Encoding | H.265 |
| Wireless Connection | Wi-Fi IEEE 802.11 a/b/g/n/ac/ax (WiFi 6) 2.4GHz/5GHz |
| Communication Method | WiFi, Ethernet |
| Storage Method | microSD card (16GB - 256GB recommended), Cloud, NAS |
| Support System | Android 8 or iOS 12.0 and above versions |
| Waterproof Rating | IP66 |
| Rated Input | 12V=1A |
| Output Current | 2A |
| Voltage | 3.7 V |
| Working Temperature (Main Unit) | -30°C to 60°C |
| Working Temperature (Adapter) | -30°C to 45°C |
| Work Humidity | 0~90% RH |
| Certification | CE |
| State of Assembly | Ready-to-Go |
Image: Detailed specifications of the Xiaomi Outdoor Camera 4.
5. Setup Guide
5.1. Physical Installation
The camera supports lifting, side, and pole installations. Ensure the installation surface can bear at least three times the camera's total weight.
Image: Various installation methods for the camera.
- Choose a Location: Select a suitable outdoor location that provides the desired monitoring range and a stable mounting surface.
- Mount the Camera: Use the provided positioning sticker and screw accessory kit to securely mount the camera.
- Connect Power: Connect the power adapter to the camera and plug it into an indoor power outlet. Remember, the power adapter is not waterproof.
- Network Connection (Optional Wired): If using a wired connection, ensure the Bluetooth function of your mobile device is turned on during setup. The camera has an RJ45 100M network port but does not support POE power supply.
Network Cable Compatibility:
| Adaptation | Incompatible |
|---|---|
| Crystal head and sheath width: 11.65mm Crystal head thickness: 6.60mm Length to connector: not exceed 26.00mm Wire cable diameter: 6.00mm~7.00mm | Strip wire Thin line Network cables with protective sleeves |
Image: Network cable connection and compatibility details.
Extension Cable Usage:
If an extension cable is needed, choose one with a DC port specification of 5.5×2.1mm and an output of 12V = 1A. Ensure connection points are waterproofed.
| Wire Number (AWG) | Maximum Length |
|---|---|
| 18 | 15 meters |
| 20 | 10 meters |
| 22 | 8 meters |
| 24 | 6 meters |
Note: This test uses the adapter that comes with the product.
5.2. App Installation & Connection
- Download Mi Home App: Scan the QR code below or search for "Mi Home" in your mobile app store (Android 8 / iOS 12.0 or above required).
Image: QR codes for Mi Home App download.
- Register/Sign In: Open the Mi Home App and register for a new account or sign in with an existing one.
- Select China Server: When adding the camera, it is crucial to select the "China" server in the Mi Home App settings. The app supports multiple languages, including English and Russian, regardless of the server choice.
- Turn on Camera & Reset: Power on the camera. If it's a new setup or you're having trouble connecting, you may need to reset the equipment.
- Add Device: In the Mi Home App, follow the on-screen instructions to add a new device. Scan the QR code located on the bottom of the product to open the Mi Home App and initiate the connection process.
Image: Mi Home App connection guide.
6. Operation
6.1. Dual-Camera Dual-Scenario Monitoring
The camera features two lenses, allowing for simultaneous monitoring of two different areas. One lens provides a wide-angle fixed view (2.8mm short-focus), while the pan-tilt lens offers a 6mm telephoto view for flexible detail tracking and AI-driven follow-up.
Image: Dual-camera capability for extended coverage.
6.2. Intelligent Full-Color Night Vision
Equipped with eight spotlights (two white lights + two infrared lights), the camera provides intelligent full-color night vision, presenting clear, detailed images even in low-light conditions. When a human figure is detected at night, supplementary lighting will automatically turn on for a full-color image.
Image: Intelligent full-color night vision in action.
6.3. AI Human/Vehicle Detection & Tracking
The camera's local AI algorithm accurately identifies human figures and vehicles. When an abnormal state is detected, the Mi Home App will send out alarm notifications and record videos as evidence. The dual-camera AI collaborative detection enables wide-angle recognition, pan-tilt follow-up, and precise tracking.
Image: Dual-camera AI collaborative detection and tracking.
6.4. Virtual Fence
The virtual fence feature allows you to customize a polygon selection area for monitoring. You can flexibly draw the monitoring range and set up special protection for key areas. Push notifications from the Mi Home App will be affected by the time interval set by the security assistant.
Image: Customizable virtual fence for targeted monitoring.
6.5. Two-Way Audio
The highly sensitive microphone and powerful speaker, combined with intelligent noise reduction, enable clear two-way voice communication. You can listen and speak through the camera as if you were there.
6.6. Sound and Light Warning System
If an anomaly is detected in the monitored area, an alarm sound and high-frequency flashing will be immediately triggered to deter intruders. The Mi Home App will also send real-time alert information and videos to your device.
6.7. Multi-Terminal Remote Viewing
View your camera feed remotely at any time and anywhere using mobile phones, tablets, Xiaomi TV, or Xiaoai touch-screen speakers. Multiple terminals can be synchronized for comprehensive monitoring.
Image: Multi-terminal remote viewing capability.
7. Maintenance
7.1. MicroSD Card Installation/Removal
The camera supports microSD cards from 16GB to 256GB. A fast, good quality memory card from a reputable manufacturer is recommended due to the high bit rate and recording volume from two cameras.
- Locate the microSD card slot on the camera.
- Carefully insert the microSD card into the slot until it clicks into place.
- After installation or removal, please make sure to properly install the dust cover on top of the card slot to prevent water from entering the product and affecting its normal operation.
7.2. Cleaning
Wipe the camera lens and body with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
7.3. Cloud Platform Calibration
If the cloud platform rotates for a long time, it may shift. It is recommended to calibrate it regularly through the Mi Home App.
8. Troubleshooting
- Connection Issues: Ensure your mobile device's Bluetooth is on during initial setup. Verify that you have selected the "China" server in the Mi Home App.
- No Recording/Storage: The package does not include a microSD card. Users are required to bring their own. Cloud storage is a paid service and needs to be separately activated.
- AI Features Not Working: AI functions such as motion detection, vehicle detection, virtual fence, and face recognition are initially disabled. They can only be used after being enabled in the "AI Functions" section of the Mi Home App.
- Notifications Delayed/Missing: Message push notifications are affected by the alarm time interval set by the security assistant (default 10 minutes). Users can modify these settings in the security assistant.
- Language Display: While the Mi Home App supports your country's language (e.g., English, Russian), some settings or video recording time displays might remain in Chinese, which cannot be changed by setting the time zone.
- Camera Calibration: If the camera's pan-tilt mechanism seems to be over-rotating or making excessive noise during calibration, it's a known characteristic. Regular calibration via the Mi Home App is recommended.
9. User Tips
- Mi Home App Server: Always select the "China" server in the Mi Home App settings for optimal compatibility and functionality with this camera model.
- MicroSD Card: Invest in a high-speed, reputable brand microSD card (128GB-256GB) to handle the high-resolution dual-camera recordings effectively.
- Wired Connection for Stability: If your monitoring area is far from your Wi-Fi router or experiences severe signal interference, consider using a network cable for a more stable and reliable data transmission.
- Power Adapter Placement: Remember the power adapter is not waterproof; ensure it is installed in a dry, indoor location.
- Explore AI Features: Don't forget to manually enable and customize the AI detection features (human/vehicle detection, virtual fence, face recognition) within the Mi Home App to enhance your security monitoring.
10. Warranty and Support
For any questions, technical support, or warranty inquiries, please contact the seller or refer to the official Xiaomi support channels in your region. Product images, models, data, functions, performance, specifications, user interface, and other product information in this manual are for reference only. Xiaomi may make improvements to the actual product, and the actual situation should be taken as the final reference.